1/2 ton stainless hubcaps - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Down south truckin · 02-20-2009, 01:46 AM

This is a pretty good set of caps they are not perfect but are better than average in my opinion 2 are nice 1 is good and 1 has 3 dings all of them need paint. $60 plus shipping paypal or postal money order.thanks Mike

Down south truckin · 03-04-2009, 10:16 PM

I will consider trades as well Thanks Mike

**lolife99** · 03-05-2009, 08:30 AM

What are you needing for a trade?
Also shipping cost to 65251.

Down south truckin · 03-05-2009, 10:29 PM

I really don't need anything specifically
I'm always buying 3/4 ton caps 4x4 + t/c shifters,67-72 4x4 bumper brackets, 4x4 shifter linkage ,4x4 clutch linkage, 2wd lowering parts,tc shifter boot rings,??? got any drag racing parts??
Shipping would be around $12 ups

Thanks Mike

Quote:

Originally Posted by lolife99

What are you needing for a trade?
Also shipping cost to 65251.

Down south truckin · 03-17-2009, 09:12 PM

ttt

ckexswb · 03-17-2009, 11:19 PM

Looking for inner rear bumper brackets, leaf spring 4x. Hope its allright to butt in.

Down south truckin · 03-18-2009, 12:13 AM

Quote:

Originally Posted by ckexswb

Looking for inner rear bumper brackets, leaf spring 4x. Hope its allright to butt in.

I would trade on some if you have some and want these hubcaps.thanks Mike

Longhorn321 · 03-17-2009, 11:40 PM

What is the difference between those and 3/4 ton caps? Just curious so if I see some 1/2 tons I don't buy them by mistake. Thanks,

Down south truckin · 03-18-2009, 12:12 AM

Quote:

Originally Posted by Longhorn321

What is the difference between those and 3/4 ton caps? Just curious so if I see some 1/2 tons I don't buy them by mistake. Thanks,

The 1/2 ton ones are 10.5 inches across and the 3/4 ton ones are 12 inches across.

the center is shaped a little different It's hard to describe but when you look at them side by side you will see it. the 3/4 ton ones have a sunk in ring around the center. I'll see if I have some pictures that show it. thanks Mike

Down south truckin · 03-18-2009, 12:17 AM

Quote:

Originally Posted by Down south truckin

The 1/2 ton ones are 10.5 inches across and the 3/4 ton ones are 12 inches across.

the center is shaped a little different It's hard to describe but when you look at them side by side you will see it. the 3/4 ton ones have a sunk in ring around the center. I'll see if I have some pictures that show it. thanks Mike

Here is a shot of the center on a 3/4 ton cap you can compare it to the ones above

Down south truckin · 03-18-2009, 12:20 AM

Also the edges appear to be thicker and more square on the 1/2 tons than the 3/4 ton edges which appear to be angled and thinner

Longhorn321 · 03-18-2009, 09:28 AM

Cool. Thanks,

sighlurr · 08-21-2009, 11:22 PM

Can you check the ride to 95630 for me?

Kiamichi Kid · 07-29-2010, 10:09 AM

Do you still have these?

Longhorn321 · 07-29-2010, 10:48 AM

Quote:

Originally Posted by Kiamichi Kid

Do you still have these?

The last post was almost a year ago so I wouldn't hold my breath.

Kiamichi Kid · 07-29-2010, 11:03 AM

:-) I agree wishful thinking :-)

Down south truckin · 08-03-2010, 10:45 PM

I may actually still have these,give me a day or two and I'll get back to you. thanks Mike

Kiamichi Kid · 08-04-2010, 10:04 AM

Ok, Thanks

02-20-2009, 01:46 AM	#1
Down south truckin Senior Member Join Date: Feb 2006 Location: Lilburn Georgia Posts: 1,240	1/2 ton stainless hubcaps This is a pretty good set of caps they are not perfect but are better than average in my opinion 2 are nice 1 is good and 1 has 3 dings all of them need paint. $60 plus shipping paypal or postal money order.thanks Mike Attached Images

03-04-2009, 10:16 PM	#2
Down south truckin Senior Member Join Date: Feb 2006 Location: Lilburn Georgia Posts: 1,240	Re: 1/2 ton stainless hubcaps I will consider trades as well Thanks Mike

03-05-2009, 08:30 AM	#3
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,692	Re: 1/2 ton stainless hubcaps What are you needing for a trade? Also shipping cost to 65251. __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823 Last edited by lolife99; 03-05-2009 at 12:50 PM.

03-17-2009, 09:12 PM	#5
Down south truckin Senior Member Join Date: Feb 2006 Location: Lilburn Georgia Posts: 1,240	Re: 1/2 ton stainless hubcaps ttt

03-17-2009, 11:19 PM	#6
ckexswb 67-72=-5 Join Date: Jun 2007 Location: calif/ beach Posts: 807	Re: 1/2 ton stainless hubcaps Looking for inner rear bumper brackets, leaf spring 4x. Hope its allright to butt in.

03-17-2009, 11:40 PM	#8
Longhorn321 Size Matters Join Date: Aug 2007 Location: Lyman, SC Posts: 9,189	Re: 1/2 ton stainless hubcaps What is the difference between those and 3/4 ton caps? Just curious so if I see some 1/2 tons I don't buy them by mistake. Thanks, __________________ "Reading the owners manual is only for quitters." Jason Harper, Bloomberg News. ...WOOOO HOOOO!!!!

03-18-2009, 12:20 AM	#11
Down south truckin Senior Member Join Date: Feb 2006 Location: Lilburn Georgia Posts: 1,240	Re: 1/2 ton stainless hubcaps Also the edges appear to be thicker and more square on the 1/2 tons than the 3/4 ton edges which appear to be angled and thinner Attached Images

03-18-2009, 09:28 AM	#12
Longhorn321 Size Matters Join Date: Aug 2007 Location: Lyman, SC Posts: 9,189	Re: 1/2 ton stainless hubcaps Cool. Thanks, __________________ "Reading the owners manual is only for quitters." Jason Harper, Bloomberg News. ...WOOOO HOOOO!!!!

08-21-2009, 11:22 PM	#13
sighlurr ______________ Join Date: Sep 2006 Location: Danville, CA Posts: 1,285	Re: 1/2 ton stainless hubcaps Can you check the ride to 95630 for me?

07-29-2010, 10:09 AM	#14
Kiamichi Kid Registered User Join Date: Jan 2008 Location: McAlester, Oklahoma Posts: 27	Re: 1/2 ton stainless hubcaps Do you still have these? __________________ 1969 CST-10 Stepside 1971 C-10 Short Fleetside 1967 GMC 3/4 Suburban 4x4 1972 C-10 Longbed

07-29-2010, 11:03 AM	#16
Kiamichi Kid Registered User Join Date: Jan 2008 Location: McAlester, Oklahoma Posts: 27	Re: 1/2 ton stainless hubcaps :-) I agree wishful thinking :-) __________________ 1969 CST-10 Stepside 1971 C-10 Short Fleetside 1967 GMC 3/4 Suburban 4x4 1972 C-10 Longbed

08-03-2010, 10:45 PM	#17
Down south truckin Senior Member Join Date: Feb 2006 Location: Lilburn Georgia Posts: 1,240	Re: 1/2 ton stainless hubcaps I may actually still have these,give me a day or two and I'll get back to you. thanks Mike

08-04-2010, 10:04 AM	#18
Kiamichi Kid Registered User Join Date: Jan 2008 Location: McAlester, Oklahoma Posts: 27	Re: 1/2 ton stainless hubcaps Ok, Thanks __________________ 1969 CST-10 Stepside 1971 C-10 Short Fleetside 1967 GMC 3/4 Suburban 4x4 1972 C-10 Longbed



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.