Is there a thread on how to instal number 15? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

tim21391 · 02-20-2009, 11:23 AM

http://www.lmctruck.com/ICATALOG/CB/full.aspx?Page=22

any help would be good thanks im thinking about buying number 15

**LockDoc** · 02-20-2009, 12:14 PM

-
I'm sure someone has done it but I don't remember seeing a thread about it.

LockDoc

Kayotic · 02-20-2009, 01:50 PM

Almost there - More and more pieces becoming available.

Wouldn't think it would be all that difficult to install...

ChevLoRay · 02-20-2009, 02:39 PM

I'm thinking the first thing would be to get the cab off of the chassis and lay it on the firewall, elevating the back side of the cab to about chest high. From there, it should be a lot easier to figure out than laying on your back and looking at it from beneath the chassis.....

At least, it worked better doing it like this on a '54 Ford P/U.

tim21391 · 02-21-2009, 02:01 AM

im not sure about doin it then i dont want to get it off the frame..ya i got al lthe bolts out but i dont wanna mess with the steering and wires and stuff.. thats more then this 18 year old wants to mess with..

tphsmith · 02-21-2009, 08:10 AM

Dang when did those come out? sure could have used on of them years back

68C15 · 02-21-2009, 08:09 AM

what's wrong with yours? pics?

tim21391 · 02-21-2009, 02:21 PM

mine were all rusted out so i cut them out and its a PITA to get it where i need them.. sorry no pics ill take some of how i got them cut out when i got finished up griding the welds on my rocker

02-20-2009, 11:23 AM	#1
tim21391 Registered User Join Date: Jul 2007 Location: Salina, Kansas Posts: 1,998	Is there a thread on how to instal number 15? http://www.lmctruck.com/ICATALOG/CB/full.aspx?Page=22 any help would be good thanks im thinking about buying number 15 __________________ 1972 C-10...402/400..flowmaster 40 series 1967 Mustang 347 stroker/C-4 1966 Mustang 289/3-speed 2013 Mustang V6/6speed w/300 ponies I may be 23, but i sure do knows 67-72s are sexy! Its not MPG its smiles per gallon! build started 11/25/08 build thread: http://67-72chevytrucks.com/vboard/s....php?p=2993796

02-20-2009, 12:14 PM	#2
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,818	Re: Is there a thread on how to instal number 15? - I'm sure someone has done it but I don't remember seeing a thread about it. LockDoc __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -

02-20-2009, 01:50 PM	#3
Kayotic Registered User Join Date: Mar 2008 Location: Lawrenceville, Ga Posts: 300	Re: Is there a thread on how to instal number 15? Almost there - More and more pieces becoming available. Wouldn't think it would be all that difficult to install... __________________ Atlanta Craigslist Hurst Indy Pickup Truck 3-Speed Shifter - 5010016

02-20-2009, 02:39 PM	#4
ChevLoRay Old Skool Club Join Date: Jun 2001 Location: Benton, AR "The Heart of Arkansas" Posts: 10,880	Re: Is there a thread on how to instal number 15? I'm thinking the first thing would be to get the cab off of the chassis and lay it on the firewall, elevating the back side of the cab to about chest high. From there, it should be a lot easier to figure out than laying on your back and looking at it from beneath the chassis..... At least, it worked better doing it like this on a '54 Ford P/U. __________________ Member Nr. 2770 '96 GMC Sportside; 4.3/SLT - Daily driven....constantly needs washed. '69 C-10 SWB; 350/TH400 - in limbo The older I get, the better I was.

02-21-2009, 02:01 AM	#5
tim21391 Registered User Join Date: Jul 2007 Location: Salina, Kansas Posts: 1,998	Re: Is there a thread on how to instal number 15? im not sure about doin it then i dont want to get it off the frame..ya i got al lthe bolts out but i dont wanna mess with the steering and wires and stuff.. thats more then this 18 year old wants to mess with.. __________________ 1972 C-10...402/400..flowmaster 40 series 1967 Mustang 347 stroker/C-4 1966 Mustang 289/3-speed 2013 Mustang V6/6speed w/300 ponies I may be 23, but i sure do knows 67-72s are sexy! Its not MPG its smiles per gallon! build started 11/25/08 build thread: http://67-72chevytrucks.com/vboard/s....php?p=2993796

02-21-2009, 08:10 AM	#6
tphsmith still buypickupparts Join Date: Sep 2003 Location: charlotte Posts: 637	Re: Is there a thread on how to instal number 15? Dang when did those come out? sure could have used on of them years back __________________ Its Gonna be a Great Day, I woke up this Morning. 72 SWB Fleetside freshly painted. putting a 94 LT1 with 700R4 tranny lowered 4 in the front 6 in the back 81 chevy half ton 350 89 Silverado 4x4 going ta church truck

02-21-2009, 08:09 AM	#7
68C15 blood type; Retumbo Join Date: Jan 2004 Location: next to my reloading bench Posts: 10,269	Re: Is there a thread on how to instal number 15? what's wrong with yours? pics?

02-21-2009, 02:21 PM	#8
tim21391 Registered User Join Date: Jul 2007 Location: Salina, Kansas Posts: 1,998	Re: Is there a thread on how to instal number 15? mine were all rusted out so i cut them out and its a PITA to get it where i need them.. sorry no pics ill take some of how i got them cut out when i got finished up griding the welds on my rocker __________________ 1972 C-10...402/400..flowmaster 40 series 1967 Mustang 347 stroker/C-4 1966 Mustang 289/3-speed 2013 Mustang V6/6speed w/300 ponies I may be 23, but i sure do knows 67-72s are sexy! Its not MPG its smiles per gallon! build started 11/25/08 build thread: http://67-72chevytrucks.com/vboard/s....php?p=2993796



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.