I need everyones opinion on this!!!!

[revn67]

ok so i will be finally starting on my project and now comes the decision of what cab i should use. i have a 67 small window cab and a 70 large window cab, i am bagging the truck over a set of 20/22 intro wheels, and it'll have an ls1/th350 for starters...the small window cab needs 1 cab corner replaced, and possibly 1 rocker, and it has rust along the driprail but it isn't bad rust..it just needs to be wire wheeled and cleaned off the metal and there are a few spots here and there on the cab that need previous owner welds ground down smooth. Now for the big window cab, that needs the whole floor replaced due to the PO who couldn't weld for crap and made stupid patch panels and booger welded everything together and same with both cab corners/rockers and a patch along the pass footwell.....now that u know what condition the cabs are in and what they are....which one would u use and which one would look right on a bagged/big wheeled c-10?

[67_C-30]

You'll get mixed responses with this! The large window is more popular, and most people would probably prefer it. This would probably help with resale value. However, there are people like me who love the small rear window, so I'd stick with it. It basically boils down to what you like best.

[70cst]

It comes down to your preference. We all have our likes and dislikes. I own a 70 so I am biased towards that year. If you go with your instincts...you can't go wrong. Good Luck.

[69halfton]

well, the truck i have is a 69, butif i were to go out and look for a 67, id get the small window over the big window for sure!

for you, its much less work, and the small window is cool just beacuse it is different

[kyull67]

small window

[69halfton]

...shoulda made this a poll...

[revn67]

ok..created a poll

[metalman1968]

Build two trucks. LOL

[Patsfan34]

Use the big window and sell me the 67 cab? Ok, deal!!!

[CPNEJR]

i say small window but i'm biased

[big_al_71]

I prefer and like the big window better!!!!

However I am looking into buying a 67 with a small window and stepside just for the heck of having two trucks..

[david jobs]

Use the 67- less work

[jerry moss]

my vote is for a west coast vacation and a u-haul for the trip home with a cab that needs a lot less work.

[67/72junkie]

I like Jerry's way of thinking but if you have to work with what you've got start with the best one.

[72BlckButy]

Tough choice, but you just don't see a lot of small window cabs used.

[C20-67_N_MO]

Okay so I am baised!

[10pointgmc]

i like the small window

[truckpoorpackrat]

I like the big window personally. But what i need to know is what front end are you using. If you are going with 69-72 front then I would use the big window. If you use the 67-68 front then use whatever cab you want. I don't think it will look correct with small window & 69-72 front. Just my opinion but either one will get with 20/22 grounded.

[chuckmc8]

I think good advice would be to always use the best sheet metal you have available-let that make your choice. The mechanicals on trucks are fun, the body work and rust repair are not fun and is what bogs down the project for me-choose the better cab and go on with the rat-killin'

[67ChevyRedneck]

Stepside truck, use small window.

Fleetside truck, use large window.

[chevy29267truck]

it looks like im the 5th one saying the 67 small back window

[jbristo67]

Heres my vote

[chevy29267truck]

WoW i like that vote better

[jbristo67]

LOL how come

[revn67]

i will be using the 67-68 front clip as well....and because tripro came out with a full floor it makes the "workload" just about the same for both cabs...hmmm, patsfan you'll be the first to know if i do end up selling the cab.