73 door swap question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

4x4man09 · 02-25-2009, 10:04 PM

I have a 73 c20, I read on a different site that only doors from 73-76 are interchangable. I have an 85 suburban sitting in the drive way, what is the difference in the doors other than the door panel area?

ont_guy_38 · 02-25-2009, 10:14 PM

other then the door panel area nothing at all

4x4man09 · 02-25-2009, 10:16 PM

Quote:

Originally Posted by ont_guy_38

other then the door panel area nothing at all

So they can be used? On the other site it says that it wont work. But since it will then I don't have to buy any new doors! Sweet!

4x4man09 · 02-25-2009, 10:20 PM

Would you happen to know what years are interchangable for most parts? I need 2 doors, front fenders, a hood, and tailgate. I saw a post for an 86 bed (wide?) and was interested in it. Maybe a site that can help better then the ones I have found?

ont_guy_38 · 02-25-2009, 10:35 PM

Quote:

Originally Posted by 4x4man09

Would you happen to know what years are interchangable for most parts? I need 2 doors, front fenders, a hood, and tailgate. I saw a post for an 86 bed (wide?) and was interested in it. Maybe a site that can help better then the ones I have found?

Yes the doors will fit for sure,fenders and hood will have to be from a 73-80 model truck.The 86 bed will fit also .Now with a little work (providing the suburban parts are good) you can put the whole front end on,it will pretty much bolt on the trickiest part is mounting the hood hinges in the cab

Restrorob · 02-25-2009, 10:37 PM

I asked BB73 (Jeff) about this a while back when looking for a cab shell for my 74 (he knows his stuff) and this is the reply I got;

Quote:

Originally Posted by bigblock73

Cab breakdown is 73-80 & 81-87. Your doors and front clip will bolt up to a 81+ cab no problem. It is more difficult going the other direction (81+ front clip on older cab).

Maybe you should go back to that other site and set them straight on parts interchanging. LOL

bigblock73 · 02-25-2009, 10:58 PM

73-76 door guts are different than 77-87 (88-91). The 73-76 window crank stalks are shorter, roller channels welded to the inside of the door are different as are the window regulator rollers themselves. Of course the door panels are different too.

You can swap complete 85 doors to your 73 no problem, it is when you start interchanging parts that you will run into trouble.

4x4man09 · 02-25-2009, 11:00 PM

Quote:

Originally Posted by bigblock73

73-76 door guts are different than 77-87 (88-91). The 73-76 window crank stalks are shorter, roller channels welded to the inside of the door are different as are the window regulator rollers themselves. Of course the door panels are different too.

Ok I'm confused now. Will it work with using everything? Like taking the whole door off, window and all and just bolting it on the 73

bigblock73 · 02-25-2009, 11:01 PM

Quote:

Originally Posted by 4x4man09

Ok I'm confused now. Will it work with using everything? Like taking the whole door off, window and all and just bolting it on the 73

I edited my post while you were typing your reply...look above.

4x4man09 · 02-25-2009, 11:19 PM

Quote:

Originally Posted by bigblock73

I edited my post while you were typing your reply...look above.

Haha alright, thanks guys for the help! I'll be sticking around as I'll need more help lol.

mhicks · 02-26-2009, 08:24 AM

Yes, change it all. I put some electric '86 doors on my '73 before I had it repainted.

02-25-2009, 10:04 PM	#1
4x4man09 Registered User Join Date: Feb 2009 Location: Bakersfield,CA Posts: 25	73 door swap question I have a 73 c20, I read on a different site that only doors from 73-76 are interchangable. I have an 85 suburban sitting in the drive way, what is the difference in the doors other than the door panel area?

02-25-2009, 10:14 PM	#2
ont_guy_38 Registered User Join Date: Jul 2007 Location: Ontario Canada Posts: 1,006	Re: 73 door swap question other then the door panel area nothing at all

02-25-2009, 10:20 PM	#4
4x4man09 Registered User Join Date: Feb 2009 Location: Bakersfield,CA Posts: 25	Re: 73 door swap question Would you happen to know what years are interchangable for most parts? I need 2 doors, front fenders, a hood, and tailgate. I saw a post for an 86 bed (wide?) and was interested in it. Maybe a site that can help better then the ones I have found?

02-25-2009, 10:58 PM	#7
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,824	Re: 73 door swap question 73-76 door guts are different than 77-87 (88-91). The 73-76 window crank stalks are shorter, roller channels welded to the inside of the door are different as are the window regulator rollers themselves. Of course the door panels are different too. You can swap complete 85 doors to your 73 no problem, it is when you start interchanging parts that you will run into trouble. __________________ Jeff 73-87.com 73-87.com Facebook page 73-87 cab corner 6x9 speaker brackets for sale 67-72 cab corner speaker brackets for sale 47-54 cab corner speaker brackets for sale Last edited by bigblock73; 02-25-2009 at 11:00 PM.

02-26-2009, 08:24 AM	#11
mhicks Registered User Join Date: Jan 2004 Location: Weatherford,Tx Posts: 747	Re: 73 door swap question Yes, change it all. I put some electric '86 doors on my '73 before I had it repainted.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.