WTB Clutch Fork/Shifter Boot & Ring - The 1947 - Present Chevrolet & GMC Truck Message Board Network

My72BB · 02-28-2009, 09:47 AM

Converting from Auto to 4 Speed and need a few final parts.

Working on 72 and need:

1. Cast iron clutch fork
2. 4 speed shift boot (angled in the front)
3. Metal ring for boot (angled in the front)

I have heard that all the parts for Big Block and Small block are the same...Anybody want to chime in.

Thanks, Alan

pickupman · 02-28-2009, 07:22 PM

I should have these parts, I will try and check for you tomorrow. Bill

My72BB · 02-28-2009, 07:51 PM

Sounds good...thx

pickupman · 03-03-2009, 08:50 PM

Sorry I did not have any of them. I think Special-K ended up wirth the boots and rings. Chevck With him. I do have a new boot for $22 if needed.

Tynee · 03-05-2009, 01:02 PM

My72BB, check with your local GMC Heavy Truck dealer on the cast iron clutch fork. When I needed the retainer clip that holds mine in place, none of hte chevy dealers, or parts houses in town had them, but the GMC/Volvo dealer did.

Also, it appears they can be had from LMC.:

http://www.lmctruck.com/ICATALOG/CB/full.aspx?Page=136

02-28-2009, 09:47 AM	#1
My72BB Registered User Join Date: Oct 2007 Location: Fairfield, PA Posts: 503	WTB Clutch Fork/Shifter Boot & Ring Converting from Auto to 4 Speed and need a few final parts. Working on 72 and need: 1. Cast iron clutch fork 2. 4 speed shift boot (angled in the front) 3. Metal ring for boot (angled in the front) I have heard that all the parts for Big Block and Small block are the same...Anybody want to chime in. Thanks, Alan

02-28-2009, 07:22 PM	#2
pickupman Registered User Join Date: Dec 2000 Location: Greeneville, TN Posts: 3,095	Re: WTB Clutch Fork/Shifter Boot & Ring I should have these parts, I will try and check for you tomorrow. Bill __________________ atheystruck@comcast.net 67 1/2 ton 4wd custom cab 72 1/2 ton 4wd super cheyenne 71 1/2 BB super cheyenne shortbed

02-28-2009, 07:51 PM	#3
My72BB Registered User Join Date: Oct 2007 Location: Fairfield, PA Posts: 503	Re: WTB Clutch Fork/Shifter Boot & Ring Sounds good...thx

03-03-2009, 08:50 PM	#4
pickupman Registered User Join Date: Dec 2000 Location: Greeneville, TN Posts: 3,095	Re: WTB Clutch Fork/Shifter Boot & Ring Sorry I did not have any of them. I think Special-K ended up wirth the boots and rings. Chevck With him. I do have a new boot for $22 if needed. __________________ atheystruck@comcast.net 67 1/2 ton 4wd custom cab 72 1/2 ton 4wd super cheyenne 71 1/2 BB super cheyenne shortbed

03-05-2009, 01:02 PM	#5
Tynee I miss this truck. Join Date: Dec 2001 Location: Lexington, KY U.S.A. Posts: 2,863	Re: WTB Clutch Fork/Shifter Boot & Ring My72BB, check with your local GMC Heavy Truck dealer on the cast iron clutch fork. When I needed the retainer clip that holds mine in place, none of hte chevy dealers, or parts houses in town had them, but the GMC/Volvo dealer did. Also, it appears they can be had from LMC.: http://www.lmctruck.com/ICATALOG/CB/full.aspx?Page=136 __________________ '07 GMC Acadia SLT. Sweet ride. '08 Crew Cab Z-71 short bed. Really like this truck A LOT.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.