Big Block A.I.R. Pump - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**425HP409** · 03-03-2009, 03:20 PM

I need to know if anyone has information or pictures as to how an A.I.R. pump
mounts up in a 72 with factory AC and Power Steering. I have all of the other brackets for the AC and PS, but cant seem to figure out how the A.I.R. pump mounts.
Thanks, Charles, The Restorer

**DANTIP** · 03-03-2009, 04:02 PM

I have a few dozen photos I can e-mail in pdf format. All of the photos are of trucks with the smog pump and air-conditioning. If this is the info you need please let me know. Here is a sample.

**DANTIP** · 03-03-2009, 04:06 PM

Here are a few more.

**425HP409** · 03-04-2009, 02:37 PM

Yes, those are the pictures I need, thank you

**425HP409** · 03-04-2009, 05:02 PM

Thanks alot for posting the pictures. They were great and I found out that I did not have the correct bracket for my engine with the short water pump. The one I have is for a long water pump and mounts low by the lower radiator hose. With your pictures I was able to find the one I need on EBAY and buy it, thanks again.

Charles, Restorer

**DANTIP** · 03-05-2009, 09:08 AM

Charles,

I'm glad the photos were helpful. I have photos of individual components if you need them. The manifold tubes proved to be the most difficult parts to locate/find. The passenger side tube connection comes up behind the A/C compressor and is not like any of the reproduced tubes available. Good Luck and please contact me if you would like more information.

Dan

**425HP409** · 03-27-2009, 05:25 PM

I received my AIR Pump bracket, but now I find that I don't have the correct AIR Pump outlet. I need the 90 degree one that bolts to the back of the AIR Pump, that the "T" bolts to that the hoses hook onto as you have in your pictures. I hope you understand what I am talking about. Do you happen to have what I need or know where I can find one?
Thanks, Charles
cdhaley@friscoauto.com
972-523-1454

03-03-2009, 03:20 PM	#1
425HP409 425hp409 Join Date: Oct 2008 Location: Prosper Texas Posts: 841	Big Block A.I.R. Pump I need to know if anyone has information or pictures as to how an A.I.R. pump mounts up in a 72 with factory AC and Power Steering. I have all of the other brackets for the AC and PS, but cant seem to figure out how the A.I.R. pump mounts. Thanks, Charles, The Restorer

03-03-2009, 04:02 PM	#2
DANTIP Registered User Join Date: Sep 2001 Location: Fort Wayne, Indiana, USA Posts: 1,882	Re: Big Block A.I.R. Pump I have a few dozen photos I can e-mail in pdf format. All of the photos are of trucks with the smog pump and air-conditioning. If this is the info you need please let me know. Here is a sample. Attached Images

03-03-2009, 04:06 PM	#3
DANTIP Registered User Join Date: Sep 2001 Location: Fort Wayne, Indiana, USA Posts: 1,882	Re: Big Block A.I.R. Pump Here are a few more. Attached Images

03-04-2009, 02:37 PM	#4
425HP409 425hp409 Join Date: Oct 2008 Location: Prosper Texas Posts: 841	Re: Big Block A.I.R. Pump Yes, those are the pictures I need, thank you

03-04-2009, 05:02 PM	#5
425HP409 425hp409 Join Date: Oct 2008 Location: Prosper Texas Posts: 841	Re: Big Block A.I.R. Pump Thanks alot for posting the pictures. They were great and I found out that I did not have the correct bracket for my engine with the short water pump. The one I have is for a long water pump and mounts low by the lower radiator hose. With your pictures I was able to find the one I need on EBAY and buy it, thanks again. Charles, Restorer

03-05-2009, 09:08 AM	#6
DANTIP Registered User Join Date: Sep 2001 Location: Fort Wayne, Indiana, USA Posts: 1,882	Re: Big Block A.I.R. Pump Charles, I'm glad the photos were helpful. I have photos of individual components if you need them. The manifold tubes proved to be the most difficult parts to locate/find. The passenger side tube connection comes up behind the A/C compressor and is not like any of the reproduced tubes available. Good Luck and please contact me if you would like more information. Dan

03-27-2009, 05:25 PM	#7
425HP409 425hp409 Join Date: Oct 2008 Location: Prosper Texas Posts: 841	Re: Big Block A.I.R. Pump I received my AIR Pump bracket, but now I find that I don't have the correct AIR Pump outlet. I need the 90 degree one that bolts to the back of the AIR Pump, that the "T" bolts to that the hoses hook onto as you have in your pictures. I hope you understand what I am talking about. Do you happen to have what I need or know where I can find one? Thanks, Charles cdhaley@friscoauto.com 972-523-1454



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.