did i get the right size u bolts,.. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

oldblue1968chevy · 03-11-2009, 07:14 PM

ordered some 5/8 thread 23 1/4 long u bolts...will they work for 2.5" drop blocks, or will i have to get 2" drop blocks or will i have to get different U bolts

thanks lol

oldblue1968chevy · 03-11-2009, 07:53 PM

anybody??

im really startin to think ima need longer u bolts or smaller blocks lol

but anybody?!?!

haysonj · 03-11-2009, 08:05 PM

Quote:

Originally Posted by oldblue1968chevy

anybody??

im really startin to think ima need longer u bolts or smaller blocks lol

but anybody?!?!

Mine are 23 1/2 with a two inch block and there is only about 1/4 inch showing below the nut. Oops I have lift blocks and leaf springs

cdowns · 03-11-2009, 08:07 PM

best thing is to take the tape measure out to the garage and measure.///if you mock it up with mounting plates with stock plate and hardware see hoew much is sticking out if you've got 2.5 sticking out get those blocks if its less then get smaller blocks

oldblue1968chevy · 03-11-2009, 08:49 PM

well my u bolts are on the truck, ive got the block..hopefully they'll fit, if they dont i can spend another 1 dollar on nother piece of 2" instead..hope it fits letchall know friday!

DZL1 · 03-11-2009, 11:11 PM

I got 2 inch blocks with 24 inch u bolts and I have maybe a little over an inch left on either side.

DZL1.

67_C-30 · 03-11-2009, 11:36 PM

Quote:

Originally Posted by oldblue1968chevy

ordered some 5/8 thread 23 1/4 long u bolts...will they work for 2.5" drop blocks, or will i have to get 2" drop blocks or will i have to get different U bolts

thanks lol

Where did you get your U bolts?

oldblue1968chevy · 03-13-2009, 08:51 AM

some custom shop here in our town ordered em for me..didnt find anyplace that could make em, why do you ask

Skirkpat · 03-13-2009, 09:15 AM

If anyone needs custom lengths, I can get them at a shop here, any length or dia. you need...just pay for them and shipping.

oldblue1968chevy · 03-13-2009, 09:22 AM

wat do they charge you out there...if the ones i ordered arent the right size i may have u get me some if you dont mind thanks

Skirkpat · 03-13-2009, 02:27 PM

Quote:

Originally Posted by oldblue1968chevy

wat do they charge you out there...if the ones i ordered arent the right size i may have u get me some if you dont mind thanks

Around 24.00 a pair I think, if you get serious I will check for sure

suville · 03-13-2009, 10:57 AM

Check this!http://www.stengelbros.com/U-boltKits.htm
found em sum time ago!

03-11-2009, 07:14 PM	#1
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	did i get the right size u bolts,.. ordered some 5/8 thread 23 1/4 long u bolts...will they work for 2.5" drop blocks, or will i have to get 2" drop blocks or will i have to get different U bolts thanks lol __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

03-11-2009, 07:53 PM	#2
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: did i get the right size u bolts,.. anybody?? im really startin to think ima need longer u bolts or smaller blocks lol but anybody?!?! __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

03-11-2009, 08:07 PM	#4
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	Re: did i get the right size u bolts,.. best thing is to take the tape measure out to the garage and measure.///if you mock it up with mounting plates with stock plate and hardware see hoew much is sticking out if you've got 2.5 sticking out get those blocks if its less then get smaller blocks __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

03-11-2009, 08:49 PM	#5
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: did i get the right size u bolts,.. well my u bolts are on the truck, ive got the block..hopefully they'll fit, if they dont i can spend another 1 dollar on nother piece of 2" instead..hope it fits letchall know friday! __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

03-11-2009, 11:11 PM	#6
DZL1 One day..... Join Date: Aug 2008 Location: Ocala, FL. Posts: 702	Re: did i get the right size u bolts,.. I got 2 inch blocks with 24 inch u bolts and I have maybe a little over an inch left on either side. DZL1.

03-13-2009, 08:51 AM	#8
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: did i get the right size u bolts,.. some custom shop here in our town ordered em for me..didnt find anyplace that could make em, why do you ask __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

03-13-2009, 09:15 AM	#9
Skirkpat Registered User Join Date: Dec 2008 Location: K.C. Missouri Posts: 1,024	Re: did i get the right size u bolts,.. If anyone needs custom lengths, I can get them at a shop here, any length or dia. you need...just pay for them and shipping.

03-13-2009, 09:22 AM	#10
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: did i get the right size u bolts,.. wat do they charge you out there...if the ones i ordered arent the right size i may have u get me some if you dont mind thanks __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

03-13-2009, 10:57 AM	#12
suville Registered User Join Date: Jun 2003 Location: Mtn. Home, Idaho Posts: 906	Re: did i get the right size u bolts,.. Check this!http://www.stengelbros.com/U-boltKits.htm found em sum time ago!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.