1963-87 Chassis Tech Tubular Control Arms - The 1947 - Present Chevrolet & GMC Truck Message Board Network

vin63 · 03-12-2009, 12:15 PM

SET OF 63-87 CHEVY TUBULAR LOWER CONTROL ARMS ONLY. THESE LOWER A-ARMS ARE NEW AND HAVE BEEN USED FOR MOCK-UP ONLY. THEY HAVE NEVER BEEN ON THE ROAD. THEY HAVE BRAND NEW BALL JOINTS INSTALLED IN THEM AND HAVE NEVER EVEN BEEN GREASED, SO THEY ARE CLEAN. THEY ARE IN (NEW) CONDITION WITH THE GREASE ZERKS INSTALLED ALSO. THEY ARE FOR AIRBAG USE ONLY, COIL SPRINGS WILL NOT WORK ON THESE CONTROL ARMS.

THESE CONTROL ARMS GO FOR $599 NEW PLUS SHIPPING. THIS IS A GREAT DEAL AND AND EXCELLANT WAY TO BAG YOUR CHEVY 1/2 TON. THE CONTROL ARMS HAVE A 3" DROP BUILT INTO THEM SO YOU CAN RUN HIGHER BAG PRESSURE FOR A LOW RIDE HEIGHT AND SMOOTH RIDE. $400 OBO. FEEL FREE TO EMAIL ANY QUESTIONS TO: nchauffe@gmail.com

sailed2japan · 03-18-2009, 11:11 PM

Man, I wish I had some cash, I'd love to have these!!

ed69 · 03-26-2009, 03:18 PM

Are these still available?

03-12-2009, 12:15 PM	#1
vin63 It's Better With Nitro Join Date: Apr 2008 Location: Chino Hills, CA Posts: 2,262	1963-87 Chassis Tech Tubular Control Arms SET OF 63-87 CHEVY TUBULAR LOWER CONTROL ARMS ONLY. THESE LOWER A-ARMS ARE NEW AND HAVE BEEN USED FOR MOCK-UP ONLY. THEY HAVE NEVER BEEN ON THE ROAD. THEY HAVE BRAND NEW BALL JOINTS INSTALLED IN THEM AND HAVE NEVER EVEN BEEN GREASED, SO THEY ARE CLEAN. THEY ARE IN (NEW) CONDITION WITH THE GREASE ZERKS INSTALLED ALSO. THEY ARE FOR AIRBAG USE ONLY, COIL SPRINGS WILL NOT WORK ON THESE CONTROL ARMS. THESE CONTROL ARMS GO FOR $599 NEW PLUS SHIPPING. THIS IS A GREAT DEAL AND AND EXCELLANT WAY TO BAG YOUR CHEVY 1/2 TON. THE CONTROL ARMS HAVE A 3" DROP BUILT INTO THEM SO YOU CAN RUN HIGHER BAG PRESSURE FOR A LOW RIDE HEIGHT AND SMOOTH RIDE. $400 OBO. FEEL FREE TO EMAIL ANY QUESTIONS TO: nchauffe@gmail.com Attached Images __________________ 1963 C-10: Deluxe-optioned cab, shortbed, fleetside Pontiac 462 ci, Kauffman D-Port alum. heads 4L80E, narrowed sheetmetal Ford 9-inch Tubular front and rear suspension Custom 6-piston front disc and 4-piston rear disc brakes

03-18-2009, 11:11 PM	#2
sailed2japan Jonny Join Date: Apr 2008 Location: Outside the Box, Austin,TX Posts: 741	Re: 1963-87 Chassis Tech Tubular Control Arms Man, I wish I had some cash, I'd love to have these!! __________________ 1966 C30, Cummins, stacks, and a flat bed in progress... "Honor.....simply put, A veteran - whether active duty, retired, national guard or reserve is someone who, at one time in his life, wrote a blank check made payable to 'The United States of America', for an amount of 'up to and including his life.' That is Honor, and there are way too many people in this country who no longer understand it." -AEC Hundley USNR

03-26-2009, 03:18 PM	#3
ed69 Registered User Join Date: Nov 2008 Location: Tucson, Az Posts: 37	Re: 1963-87 Chassis Tech Tubular Control Arms Are these still available?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.