WTB: front engine hoist bracket 350 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Ozark Tim · 03-17-2009, 08:47 AM

I am looking for the front bracket that mounts to the two forward holes on the driver side of the intake manifold off a 350 for a 71 or 72 truck and could actually use two of them if there are any out there. The bracket has a circle hole in the middle of it and was intended to be a hoisting bracket for pulling the motor.
I made a arrow on the picture but it is kind of hard to see and not the greatest but only picture I had that at least showed part of the bracket.
PM me if you have one youd sell!
Thanks,
Tim

**LEEVON** · 03-17-2009, 09:13 AM

I think I have one at home, I'll check tonight. Any chance you have some of this stuff to trade?: http://67-72chevytrucks.com/vboard/s...d.php?t=333227

Ozark Tim · 03-17-2009, 03:36 PM

Thanks for checking that for me!
I appreciate that very much.
You mean trade parts from the truck in the picture? That was an old truck I had some time back but no longer have otherwise I would be happy to. Is there anything in particular you are looking for? I may have it.
Thanks,
Tim

**LEEVON** · 03-17-2009, 07:01 PM

Is this what you're looking for? I was just offering to trade if you have the guts to a factory steering wheel or the little pin/spring/retainer on a seat slide. Otherwise I'll take $10 plus shipping.

themeskin · 03-17-2009, 09:17 PM

hi do u have a pic of the spring i have a set of seat tracks from a 72 if u like 2 trade if ozark tim doesnt want them thanks themesn

**LEEVON** · 03-17-2009, 10:11 PM

oops, there's only one bracket with a pic of both sides. Sent you a pm themeskin.

**67sss** · 03-18-2009, 12:46 AM

this type?

**LEEVON** · 03-18-2009, 09:37 AM

Hey OzarkTim, after looking at 67sss's photos, I don't think my bracket is a lifting eye. Sorry.

**CPNE** · 03-18-2009, 11:21 AM

Quote:

Originally Posted by LEEVON

Hey OzarkTim, after looking at 67sss's photos, I don't think my bracket is a lifting eye. Sorry.

Nope, your bracket bolts to the intake on the LH rear of the engine. The hole in it is for the vacuum from carb rear to brake booster to pass thru. The tab "extension" above that hole, is where the plastic loom for the plug wires sits.

**67sss** · 03-20-2009, 01:23 AM

pm sent

03-17-2009, 08:47 AM	#1
Ozark Tim Registered User Join Date: Aug 2004 Location: Oakville, MO Posts: 1,018	WTB: front engine hoist bracket 350 I am looking for the front bracket that mounts to the two forward holes on the driver side of the intake manifold off a 350 for a 71 or 72 truck and could actually use two of them if there are any out there. The bracket has a circle hole in the middle of it and was intended to be a hoisting bracket for pulling the motor. I made a arrow on the picture but it is kind of hard to see and not the greatest but only picture I had that at least showed part of the bracket. PM me if you have one youd sell! Thanks, Tim Attached Images

03-17-2009, 09:13 AM	#2
LEEVON Moderator Join Date: Jul 2006 Location: Ozark, MO Posts: 4,888	Re: WTB: front engine hoist bracket 350 I think I have one at home, I'll check tonight. Any chance you have some of this stuff to trade?: http://67-72chevytrucks.com/vboard/s...d.php?t=333227 __________________ '20 Silverado Trail Boss ~ '17 Tahoe ~ '79 K15 Sierra Grande ~ '76 Blazer 2wd ~ '71 Cheyenne swb ~ '55 Pontiac Safari ~'50 3100 bagged ~ '80 Wife ~ Late model kids Last edited by LEEVON; 03-17-2009 at 09:18 AM.

03-17-2009, 03:36 PM	#3
Ozark Tim Registered User Join Date: Aug 2004 Location: Oakville, MO Posts: 1,018	Re: WTB: front engine hoist bracket 350 Thanks for checking that for me! I appreciate that very much. You mean trade parts from the truck in the picture? That was an old truck I had some time back but no longer have otherwise I would be happy to. Is there anything in particular you are looking for? I may have it. Thanks, Tim

03-17-2009, 07:01 PM	#4
LEEVON Moderator Join Date: Jul 2006 Location: Ozark, MO Posts: 4,888	Re: WTB: front engine hoist bracket 350 Is this what you're looking for? I was just offering to trade if you have the guts to a factory steering wheel or the little pin/spring/retainer on a seat slide. Otherwise I'll take $10 plus shipping. __________________ '20 Silverado Trail Boss ~ '17 Tahoe ~ '79 K15 Sierra Grande ~ '76 Blazer 2wd ~ '71 Cheyenne swb ~ '55 Pontiac Safari ~'50 3100 bagged ~ '80 Wife ~ Late model kids Last edited by LEEVON; 03-17-2009 at 07:01 PM.

03-17-2009, 09:17 PM	#5
themeskin Registered User Join Date: Feb 2009 Location: el paso tx Posts: 125	Re: WTB: front engine hoist bracket 350 hi do u have a pic of the spring i have a set of seat tracks from a 72 if u like 2 trade if ozark tim doesnt want them thanks themesn

03-17-2009, 10:11 PM	#6
LEEVON Moderator Join Date: Jul 2006 Location: Ozark, MO Posts: 4,888	Re: WTB: front engine hoist bracket 350 oops, there's only one bracket with a pic of both sides. Sent you a pm themeskin. __________________ '20 Silverado Trail Boss ~ '17 Tahoe ~ '79 K15 Sierra Grande ~ '76 Blazer 2wd ~ '71 Cheyenne swb ~ '55 Pontiac Safari ~'50 3100 bagged ~ '80 Wife ~ Late model kids Last edited by LEEVON; 03-17-2009 at 10:12 PM.

03-18-2009, 12:46 AM	#7
67sss Registered User Join Date: Nov 2002 Location: Mt. Vernon, WA.. Posts: 2,325	Re: WTB: front engine hoist bracket 350 this type? Attached Images

03-18-2009, 09:37 AM	#8
LEEVON Moderator Join Date: Jul 2006 Location: Ozark, MO Posts: 4,888	Re: WTB: front engine hoist bracket 350 Hey OzarkTim, after looking at 67sss's photos, I don't think my bracket is a lifting eye. Sorry. __________________ '20 Silverado Trail Boss ~ '17 Tahoe ~ '79 K15 Sierra Grande ~ '76 Blazer 2wd ~ '71 Cheyenne swb ~ '55 Pontiac Safari ~'50 3100 bagged ~ '80 Wife ~ Late model kids

03-20-2009, 01:23 AM	#10
67sss Registered User Join Date: Nov 2002 Location: Mt. Vernon, WA.. Posts: 2,325	Re: WTB: front engine hoist bracket 350 pm sent



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.