1970 Chevy im building - The 1947 - Present Chevrolet & GMC Truck Message Board Network

quandel_garage · 03-28-2009, 08:30 PM

I picked this truck up from someone who had lost interest. Currently I got the motor in it and running and started replacing panels on it. This summer it will be getting 2 1/2 ft of lift more and 52"s. Let me know what you think ?

quandel_garage · 03-28-2009, 08:31 PM

[IMG]

[/IMG]

*project 67 sub* · 03-29-2009, 01:40 AM

looks good but i like were it sits at now

**oldiron** · 03-29-2009, 01:47 AM

Good looking project. Since you landed in the Suburban forum I'm going to move you over to the 4X4 forum.

**Yukon Jack** · 03-29-2009, 10:22 AM

Tuff looking truck. What are the present specs? Axles, engine, tranny, tire size?

quandel_garage · 03-29-2009, 12:29 PM

It only has half tons under it right now with 4.56 gears. 40in super swampers, 12in lift, 350 four bolt main, 400 turbo trans, 2500 stall, probably right around 400 hp

bigblazerboy · 03-30-2009, 08:13 PM

it would look nicer if it had the corret bed but i like the stance and the big wide tires. it looks mean

quandel_garage · 03-31-2009, 01:21 AM

I am planning on shortening the bed about a foot or right now I am making new fenders from two 67 step sides. I had to cut the center out of one to extend them so they will fit

Joey~AP · 04-01-2009, 02:54 PM

I like it!

03-28-2009, 08:30 PM	#1
quandel_garage Registered User Join Date: Nov 2007 Location: dallas texas Posts: 19	1970 Chevy im building I picked this truck up from someone who had lost interest. Currently I got the motor in it and running and started replacing panels on it. This summer it will be getting 2 1/2 ft of lift more and 52"s. Let me know what you think ? Attached Images __________________ Quandel Garage......Making MONSTERS one ride at a time!

03-28-2009, 08:31 PM	#2
quandel_garage Registered User Join Date: Nov 2007 Location: dallas texas Posts: 19	Re: 1970 Chevy im building [IMG][/IMG] __________________ Quandel Garage......Making MONSTERS one ride at a time!

03-29-2009, 01:40 AM	#3
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: 1970 Chevy im building looks good but i like were it sits at now

03-29-2009, 01:47 AM	#4
oldiron Designated Grumpy Old Man Join Date: Oct 2001 Location: arlington, washington usa Posts: 3,094	Re: 1970 Chevy im building Good looking project. Since you landed in the Suburban forum I'm going to move you over to the 4X4 forum. __________________ Never let the truth get in the way of a good story 71 Chev 1/2 ton 4X4 LWB Fleetside SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=361222 http://www.youtube.com/watch?v=1LgREwtDfaA 68 Chev 1 ton flat bed http://www.youtube.com/watch?v=0bO8szzlD4A 56 Chev Handyman Wagon http://www.youtube.com/watch?v=9y-6ddpBTkM http://www.youtube.com/watch?v=lbLzZ7zY8wA 56 Chev Belair http://67-72chevytrucks.com/vboard/s...d.php?t=410667 http://www.youtube.com/watch?v=xoW0Ei7ZNIg

03-29-2009, 10:22 AM	#5
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,686	Re: 1970 Chevy im building Tuff looking truck. What are the present specs? Axles, engine, tranny, tire size? __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

03-29-2009, 12:29 PM	#6
quandel_garage Registered User Join Date: Nov 2007 Location: dallas texas Posts: 19	Re: 1970 Chevy im building It only has half tons under it right now with 4.56 gears. 40in super swampers, 12in lift, 350 four bolt main, 400 turbo trans, 2500 stall, probably right around 400 hp __________________ Quandel Garage......Making MONSTERS one ride at a time!

03-30-2009, 08:13 PM	#7
bigblazerboy Registered User Join Date: Nov 2008 Location: richmond, va Posts: 304	Re: 1970 Chevy im building it would look nicer if it had the corret bed but i like the stance and the big wide tires. it looks mean

03-31-2009, 01:21 AM	#8
quandel_garage Registered User Join Date: Nov 2007 Location: dallas texas Posts: 19	Re: 1970 Chevy im building I am planning on shortening the bed about a foot or right now I am making new fenders from two 67 step sides. I had to cut the center out of one to extend them so they will fit __________________ Quandel Garage......Making MONSTERS one ride at a time!

04-01-2009, 02:54 PM	#9
Joey~AP TexasBowhunter Join Date: Mar 2008 Location: alvin, texas Posts: 450	Re: 1970 Chevy im building I like it! __________________ Build in progress for son's first truck.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.