WOuld you replace these parts?? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

lyrikz · 04-01-2009, 09:59 AM

Doin the restore on the 71 and im putting my brake system back together. The booster looks to be ORIGINAL, along with the master cylinder. The MC may have been replaced but its hard to tell. The Booster is definetly OG.

Should i replace these? The brakes worked great when i took them off the truck. Just wanted to get some opinions.

Slick67 · 04-01-2009, 10:02 AM

If they are possibly original....replace em'. Why build something nice that you can't stop??

IMO

cdowns · 04-01-2009, 10:11 AM

i'd go new as i like to do the job only once

**special-K** · 04-01-2009, 10:20 AM

It doesn`t take long for a booster or m/c to look old.They may not be that old.But,if this is a restoration I`d go ahead and change to have it all fresh.It`s not a whole heap of money to do.Also,with brakes,I go the thorough route unless in a pinch.With hydraulics it`s best to change cylinders at the same time to avoid a weakness.

MrC1 · 04-01-2009, 12:03 PM

I'm going to go the other direction on this one. With the poor luck I've had and seen with parts store replacement parts like master cylinders, I think if it worked fine before.....I'd keep it! I've seen so many "new" and "rebuilt" MCs be bad right out of the box over the years. Just a thought.

big_al_71 · 04-01-2009, 12:38 PM

I would replace everything with new parts and not go cheap for sure cheaper is not always better..Do it once perfect.

lyrikz · 04-01-2009, 12:47 PM

Quote:

Originally Posted by big_al_71

I would replace everything with new parts and not go cheap for sure cheaper is not always better..Do it once perfect.

Next question would be the place to buy.. I have all the options of Napa, Schucks, Olympic, and carquest. Where do i want to get em from?

**truckdude239** · 04-01-2009, 12:59 PM

REPLACE at least the master cylider if i had brake fuild in it before and it sat with none in it for a while the seals are going to be ruined why chace it when you can get a new mc at the parts store for 14 buxs i installed one about 2 years ago was anew mc from advance auto parts this was a new unit not rebuilt and it is till working fine

monte0185 · 04-01-2009, 01:12 PM

Id say replace the M/C and the wheel cylinders at the very least. If the Booster goes out it will still stop itll just take a bit more effort. Good luck.

04-01-2009, 09:59 AM	#1
lyrikz PITbut Join Date: Sep 2007 Location: monroe washington Posts: 3,052	WOuld you replace these parts?? Doin the restore on the 71 and im putting my brake system back together. The booster looks to be ORIGINAL, along with the master cylinder. The MC may have been replaced but its hard to tell. The Booster is definetly OG. Should i replace these? The brakes worked great when i took them off the truck. Just wanted to get some opinions.

04-01-2009, 10:02 AM	#2
Slick67 Sofa King Crazy!! Join Date: Oct 2008 Location: Houston, TX Posts: 3,090	Re: WOuld you replace these parts?? If they are possibly original....replace em'. Why build something nice that you can't stop?? IMO __________________ You found the Tater. *My Blazer Build (New)* - http://67-72chevytrucks.com/vboard/s...d.php?t=654650 *My 67 Build* - http://67-72chevytrucks.com/vboard/s...d.php?t=335650 67 Chevy LWB big window a/c AKA TOTALLED BY A JACKASS. 1972 2wd Blazer "Porterbuilt and Sloshed"

04-01-2009, 10:11 AM	#3
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	Re: WOuld you replace these parts?? i'd go new as i like to do the job only once __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

04-01-2009, 10:20 AM	#4
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,852	Re: WOuld you replace these parts?? It doesn`t take long for a booster or m/c to look old.They may not be that old.But,if this is a restoration I`d go ahead and change to have it all fresh.It`s not a whole heap of money to do.Also,with brakes,I go the thorough route unless in a pinch.With hydraulics it`s best to change cylinders at the same time to avoid a weakness. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

04-01-2009, 12:03 PM	#5
MrC1 Dork For Days Join Date: Aug 2005 Location: Dallas Posts: 407	Re: WOuld you replace these parts?? I'm going to go the other direction on this one. With the poor luck I've had and seen with parts store replacement parts like master cylinders, I think if it worked fine before.....I'd keep it! I've seen so many "new" and "rebuilt" MCs be bad right out of the box over the years. Just a thought. __________________ 1972 C20, 402/700R4 - My first classic truck, bought in September 2005. 85% transformed from "Farm" to "Cool" status! 1970 Dodge Challenger 440, 4sp (my other toy) 12.67 @ 117 MPH, with a pathetic 2.022 60' 2007 Dodge Charger SRT-8 2008 Cadillac CTS All-American garage, baby!

04-01-2009, 12:38 PM	#6
big_al_71 Registered User Join Date: Jun 2008 Location: South Florida Posts: 11,375	Re: WOuld you replace these parts?? I would replace everything with new parts and not go cheap for sure cheaper is not always better..Do it once perfect. __________________ Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild

04-01-2009, 12:59 PM	#8
truckdude239 Senior Member Join Date: Sep 2005 Location: Lewisville, Nc Posts: 10,237	Re: WOuld you replace these parts?? REPLACE at least the master cylider if i had brake fuild in it before and it sat with none in it for a while the seals are going to be ruined why chace it when you can get a new mc at the parts store for 14 buxs i installed one about 2 years ago was anew mc from advance auto parts this was a new unit not rebuilt and it is till working fine __________________ David fuller Ase Certified Mechanic Click here to help support our board!! 1971 Chevy c-10 under going a 4.8l LSx swap Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=421305 2007 Honda Accord my daily 145kmiles 2002 Honda Accord 4 door With 330k(sisters car) 2005 toyota Avalon 228k( brothers car) 2002 Sububran 5.3 245k 2000 Tahoe 5.3l 378 General manager for Marco's Carwash & lube

04-01-2009, 01:12 PM	#9
monte0185 Registered User Join Date: Oct 2008 Location: Brighton, TN Posts: 1,267	Re: WOuld you replace these parts?? Id say replace the M/C and the wheel cylinders at the very least. If the Booster goes out it will still stop itll just take a bit more effort. Good luck. __________________ A computer once beat me at chess, but it was no match for me at kick boxing. Duct tape is like the force. It has a light side, a dark side, and it holds the world together.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.