? for you Blazer guys - The 1947 - Present Chevrolet & GMC Truck Message Board Network

pickupman · 12-21-2002, 02:24 PM

I got in part of a blazer today. Usually there isn't much of a body left on these things, but this one has a pretty good windshield frame on it. It is worth saving. Where is the best place to cut these off at to make them good and useable for the next guy.
Also it appears that the rocker boxes are intact, not sure yet. I can't remember on those either, are they a completely bolted on, or are they welded somewhere too. Finding even a remains of a rocker box around here is rare. lol
Thanks guys, Bill

teeitup · 12-21-2002, 03:10 PM

Hi Bill, The windshield frames are worth between $250-$350 if no rust. I've seen them cut off right down below the windshield and also cut off all the way down to the rockers Good rocker boxes are worth quite a bit also, sorry not much help for you.

Mudder · 12-21-2002, 03:10 PM

Both are very worth while keeping. Just getting those rocker boxes off so that someone could get a good pattern off of them is worth something also. Just bought a windshield frame and it wasnt cheap.

**Classic Heartbeat** · 12-21-2002, 03:19 PM

Mudder67 I sent him a PM to see if he would sell the rocker boxes to me so I could try to get them reproduced. WES www.ClassicHeartbeat.com

Mudder · 12-21-2002, 03:22 PM

Very good idea Wes. I know someone had them here one time but were quiet pricey. And ya know that takes the fun out of it LOL.

**Classic Heartbeat** · 12-21-2002, 03:26 PM

I have heard that someone was hand fabricating them with a break machine I think.... I also heard that they were about $500.00 each!! Ouch.... I would hope we could get them reproduced and resell for less than $200.00... Well thats my hope anyway. WES www.ClassicHeartbeat.com

pickupman · 12-21-2002, 03:47 PM

Thanks guys, Wes I sent you a pm. Hopefully they are good enough when I get them off to use as a pattern.

*67/72junkie* · 12-21-2002, 08:31 PM

Wes if the ones pickupman has don't work out let me know.I might be able to help. I took the quaters off one awhile back and I think the boxes are still good . I'll check tomorrow.

junkyardjohn · 12-22-2002, 01:56 AM

BILL -- I REMOVED A SET OF ROCKER BOXES OFF A 72 BLAZER. IT WAS A PRETTY GOOD CHORE, & TOOK ABOUT 4 HOURS. THEY ARE ALMOST COMPLETELY WELDED. I USED A SET OF TORCHES,A SAWZALL & A AIR HAMMER WITH A SHARP CHISEL BIT. I FIGURED IT WAS SOMETHING I WOULD DO IN ABOUT AN HOUR OR HOUR & A HALF, BUT IT TURNED OUT TO BE ALOT MORE WORK THAN I THOUGHT.

JOHN

12-21-2002, 02:24 PM	#1
pickupman Registered User Join Date: Dec 2000 Location: Greeneville, TN Posts: 3,097	? for you Blazer guys I got in part of a blazer today. Usually there isn't much of a body left on these things, but this one has a pretty good windshield frame on it. It is worth saving. Where is the best place to cut these off at to make them good and useable for the next guy. Also it appears that the rocker boxes are intact, not sure yet. I can't remember on those either, are they a completely bolted on, or are they welded somewhere too. Finding even a remains of a rocker box around here is rare. lol Thanks guys, Bill __________________ atheystruck@comcast.net 67 1/2 ton 4wd custom cab 72 1/2 ton 4wd super cheyenne 71 1/2 BB super cheyenne shortbed

12-21-2002, 03:10 PM	#2
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Hi Bill, The windshield frames are worth between $250-$350 if no rust. I've seen them cut off right down below the windshield and also cut off all the way down to the rockers Good rocker boxes are worth quite a bit also, sorry not much help for you. __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

12-21-2002, 03:19 PM	#4
Classic Heartbeat Project Junkie! Fishing Poor!! Join Date: Dec 1999 Location: Olympia,Wa. 98512 Posts: 10,766	Mudder67 I sent him a PM to see if he would sell the rocker boxes to me so I could try to get them reproduced. WES www.ClassicHeartbeat.com __________________ On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys

12-21-2002, 03:26 PM	#6
Classic Heartbeat Project Junkie! Fishing Poor!! Join Date: Dec 1999 Location: Olympia,Wa. 98512 Posts: 10,766	I have heard that someone was hand fabricating them with a break machine I think.... I also heard that they were about $500.00 each!! Ouch.... I would hope we could get them reproduced and resell for less than $200.00... Well thats my hope anyway. WES www.ClassicHeartbeat.com __________________ On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys

12-21-2002, 03:47 PM	#7
pickupman Registered User Join Date: Dec 2000 Location: Greeneville, TN Posts: 3,097	Thanks guys, Wes I sent you a pm. Hopefully they are good enough when I get them off to use as a pattern. __________________ atheystruck@comcast.net 67 1/2 ton 4wd custom cab 72 1/2 ton 4wd super cheyenne 71 1/2 BB super cheyenne shortbed

12-21-2002, 03:10 PM	#3
Mudder Registered User Join Date: Feb 2001 Location: East Central, MO Posts: 11,336	Both are very worth while keeping. Just getting those rocker boxes off so that someone could get a good pattern off of them is worth something also. Just bought a windshield frame and it wasnt cheap.

12-21-2002, 03:22 PM	#5
Mudder Registered User Join Date: Feb 2001 Location: East Central, MO Posts: 11,336	Very good idea Wes. I know someone had them here one time but were quiet pricey. And ya know that takes the fun out of it LOL.

12-21-2002, 08:31 PM	#8
67/72junkie Account Suspended Join Date: Oct 2002 Location: NC Posts: 1,129	Rocker boxes Wes if the ones pickupman has don't work out let me know.I might be able to help. I took the quaters off one awhile back and I think the boxes are still good . I'll check tomorrow.

12-22-2002, 01:56 AM	#9
junkyardjohn Registered User Join Date: Aug 2001 Location: SOMERSET KY. Posts: 6,425	BILL -- I REMOVED A SET OF ROCKER BOXES OFF A 72 BLAZER. IT WAS A PRETTY GOOD CHORE, & TOOK ABOUT 4 HOURS. THEY ARE ALMOST COMPLETELY WELDED. I USED A SET OF TORCHES,A SAWZALL & A AIR HAMMER WITH A SHARP CHISEL BIT. I FIGURED IT WAS SOMETHING I WOULD DO IN ABOUT AN HOUR OR HOUR & A HALF, BUT IT TURNED OUT TO BE ALOT MORE WORK THAN I THOUGHT. JOHN __________________ junkyardjohn 69 1 TON TOW TRUCK // 84 4WD CUCV BLAZER// 85 1 TON 4WD STAKE TRUCK// 86 M1031 5/4 TON 4WD CUCV// ALOT OF OLD TRUCKS FOR ONE OLD MAN TO DRIVE. THERES ROOM FOR ALL OF GODS CREATURES RIGHT NEXT TO MY MASHED POTATOES// LIFE MEMBER OF P.E.T.A (PEOPLE EATING TASTY ANIMALS) DON'T RENT U-HAUL ALWAYS TELL THE TRUTH IT WILL AMAZE PART OF THE PEOPLE & ASTONISH THE REST



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.