Good price for a cab - The 1947 - Present Chevrolet & GMC Truck Message Board Network

SchreinerM · 04-09-2009, 05:27 PM

Found a solid, clean, no rust 67-72 cab covered in epoxy primer. It's a bare cab (no glass, column, etc).

What's a good price to offer?

**fine69** · 04-09-2009, 05:44 PM

Never offer. You may offer more than they will take for it.

I sold a 75 Elcamino a few months ago. Had it listed for $1500 on Craigslist. Would have taken $800 bucks for it. Tired of it sitting around my house.

Guy came, drove it. Asked me what i would take. I said, make me an offer. He said how about $1300??? hmmm OK.

Thank you dude.

Find out what they want, then go from there.

Always wait until they toss you a price. If they say make an offer, offer $1. When they laugh. Say, Well thats what i want to offer. Now what do you want???

Jim_PA · 04-09-2009, 07:20 PM

Yep. "Make me an offer" means -- "how much money are you willing to give me for it".

Go lowball first.

Skirkpat · 04-09-2009, 09:17 PM

I aleays ask what their "bottom dollar" is when they give it , I always ask are you sure?....Make them negotiate with you....you have what they want $$$$.

The first one who comes up with a number looses in a negotiation usually.

And Always lowball, but if you want it ,be willing, and ABLE to pay.

teeitup · 04-09-2009, 09:24 PM

Make him give you a price first, tell him you can't be the buyer and seller both.

tim21391 · 04-09-2009, 09:26 PM

i like the $1 i would say the same thing

**special-K** · 04-10-2009, 06:00 AM

A good solid cab is "worth" $1,500 in the rust belt,IMO.

my67chevytruck · 04-10-2009, 08:04 AM

Quote:

Originally Posted by special-K

A good solid cab is "worth" $1,500 in the rust belt,IMO.

I need to stockup , rebuild, and sell cabs......

**special-K** · 04-10-2009, 09:06 AM

I`d like to,also.Thegood ones are far away from the rust belt.So,shipping a huge chunk like that will run high plus the cost of cab.To fix one I`d want At least that much for my time plus panels.Then,you have a chopped and welded/patched cab.Hopefully a good job that will hold up.All this makes a clean bolt-on cab at you door worth the big price.It`s the core of your truck.Everything else is bolt-on.

cdowns · 04-10-2009, 09:55 AM

if he wants to sell he should set the price he wants//you can get into an auction on ebay

jb4short · 04-10-2009, 09:57 AM

1500.00-2000.00 if it's ready to bolt on

04-09-2009, 05:27 PM	#1
SchreinerM Registered User Join Date: Oct 2006 Location: Oshkosh, WI Posts: 101	Good price for a cab Found a solid, clean, no rust 67-72 cab covered in epoxy primer. It's a bare cab (no glass, column, etc). What's a good price to offer?

04-09-2009, 05:44 PM	#2
fine69 Senior Member Join Date: Dec 1999 Location: Urbana,Ohio,USA Posts: 4,618	Re: Good price for a cab Never offer. You may offer more than they will take for it. I sold a 75 Elcamino a few months ago. Had it listed for $1500 on Craigslist. Would have taken $800 bucks for it. Tired of it sitting around my house. Guy came, drove it. Asked me what i would take. I said, make me an offer. He said how about $1300??? hmmm OK. Thank you dude. Find out what they want, then go from there. Always wait until they toss you a price. If they say make an offer, offer $1. When they laugh. Say, Well thats what i want to offer. Now what do you want??? __________________ 2008 Chevy HHR 1/2 panel. 1949 Chevy Panel truck(just sittin, waiting) Board member #6

04-09-2009, 07:20 PM	#3
Jim_PA Registered User Join Date: May 2005 Location: PA Posts: 2,696	Re: Good price for a cab Yep. "Make me an offer" means -- "how much money are you willing to give me for it". Go lowball first.

04-09-2009, 09:17 PM	#4
Skirkpat Registered User Join Date: Dec 2008 Location: K.C. Missouri Posts: 1,024	Re: Good price for a cab I aleays ask what their "bottom dollar" is when they give it , I always ask are you sure?....Make them negotiate with you....you have what they want $$$$. The first one who comes up with a number looses in a negotiation usually. And Always lowball, but if you want it ,be willing, and ABLE to pay.

04-09-2009, 09:24 PM	#5
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Good price for a cab Make him give you a price first, tell him you can't be the buyer and seller both. __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-09-2009, 09:26 PM	#6
tim21391 Registered User Join Date: Jul 2007 Location: Salina, Kansas Posts: 1,998	Re: Good price for a cab i like the $1 i would say the same thing __________________ 1972 C-10...402/400..flowmaster 40 series 1967 Mustang 347 stroker/C-4 1966 Mustang 289/3-speed 2013 Mustang V6/6speed w/300 ponies I may be 23, but i sure do knows 67-72s are sexy! Its not MPG its smiles per gallon! build started 11/25/08 build thread: http://67-72chevytrucks.com/vboard/s....php?p=2993796

04-10-2009, 06:00 AM	#7
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,859	Re: Good price for a cab A good solid cab is "worth" $1,500 in the rust belt,IMO. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

04-10-2009, 09:06 AM	#9
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,859	Re: Good price for a cab I`d like to,also.Thegood ones are far away from the rust belt.So,shipping a huge chunk like that will run high plus the cost of cab.To fix one I`d want At least that much for my time plus panels.Then,you have a chopped and welded/patched cab.Hopefully a good job that will hold up.All this makes a clean bolt-on cab at you door worth the big price.It`s the core of your truck.Everything else is bolt-on. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

04-10-2009, 09:55 AM	#10
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	Re: Good price for a cab if he wants to sell he should set the price he wants//you can get into an auction on ebay __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

04-10-2009, 09:57 AM	#11
jb4short Damn Yankee Join Date: Feb 2007 Location: Lynchburg, VA Posts: 2,261	Re: Good price for a cab 1500.00-2000.00 if it's ready to bolt on



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.