carb.turbo 350 linkage.black belts

[FOREVER71]

couple things to sell......
edelbrock carb...real nice hardly used...600cfm...150.00+ the ride

chrome powdercoated linkage...real nice, no wear 100.00+ the ride

black belts ...no center belt just passenger and driver.nice buckles and webbing is nice.no cracks on retractor plastic,dated 71. 100.00 plus the ride... all items are to be paid by money order...any questions let me know.more pics available....

[FOREVER71]

ttt

[OLEBEATER]

$50 plus ride for belts to 22560.??????

[FOREVER71]

i can do 100.00 shipped to ya ...thats about it..thanks

[OLEBEATER]

Let me kno if ya change your mind on the carpet and seat belts.

[FOREVER71]

any offers??????

[baitshop1]

interested in the carb. do you know if the cfm is enough for a 396 big block? can i use it with my stock intake manifold? electric choke?
how much shipped to 91001?

thanks
niel

[FOREVER71]

electric choke. yes you could put it on a factory manifold. is it big enough???i dont know for sure.

[FOREVER71]

the carb is probly a 650 actually.ill do some checking tonight so we all know for sure. i was just thinking 600 when i posted.....

[FOREVER71]

no i was corect, model #1406 600cfm...

[STOCKISH]

Great price on the belts.

[el curioso]

if the carb is still available im intrested... is it square bore or spread bore??

[FOREVER71]

carb is sold pending pick up by brad...thanks

[hgs_notes]

To determine if the carb is big enough, just do a little math. You have a 396 that probably tops out around 6000 rpm. There are 1728 cubic inches per cubic foot. You find how many cubic feet the engine will draw by multiplying 396 x 3000 and divide by 1728. You use 3000 because the engine draws air into the cylinders every other rotation. That gives you 687.5 cfm. Edelbrock recommends about 120-150% oversizing the carb, so that would mean a carb cfm rating of 825-1031 cfm. Of course, if you never exceed say 5000 rpm, the numbers come down. Hope this helps.