The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 99-06 GMT800 Chevy and GMC Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 04-27-2009, 02:15 PM   #1
tvblazer78
Low & Fast!
 
tvblazer78's Avatar
 
Join Date: Jan 2007
Location: Knoxville, TN
Posts: 3,110
Anyone runing a HD hood on 1/2 tone?

I have seen some truck with a HD hood and they look cool as Hell. My question is do you have to change anything to run this hood?

Thanks,
Trav
tvblazer78 is offline   Reply With Quote
Old 04-27-2009, 05:13 PM   #2
JohnC
Registered User
 
JohnC's Avatar
 
Join Date: Feb 2009
Location: Oklahoma
Posts: 7,461
Re: Anyone runing a HD hood on 1/2 tone?

There is a guy here in town that is running it on his. Next time I see him I'll ask him what all he had to do. I know the grill on my cousin's 02 HD a little taller than the grill on a stock 02. Don't know if it's because of the bumper, or because of the bumper.
JohnC is offline   Reply With Quote
Old 04-27-2009, 05:16 PM   #3
67ChevyRedneck
Hittin E-Z Street on Mud Tires
 
67ChevyRedneck's Avatar
 
Join Date: Nov 2004
Location: Greenville, SC
Posts: 23,090
Re: Anyone runing a HD hood on 1/2 tone?

I have a 99-02 Silverado and would LOVE to know this info as well. The tall front deck of the HD hoods looks a lot like a 67 hood.
__________________
Jesse James
1967 C10 SWB Stepside: 350/700R4/3.73
1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc
1968 Pontiac Firebird: Project Fire Chicken!
2015 Silverado Double Cab 5.3L Z71
2001 Jeep Wrangler Sport 4.0L 5spd
2020 Chevrolet Equinox Premium 2.0L Turbo
2011 Mustang V6 ~ Wife's ride
American Born, Country by the Grace of God
1967 CST Shop Truck Rebuild!
My 1967 C-10 Build Thread
My Vintage Air A/C Install
Project "On a Dime"
Trying my hand at Home Renovation!
1965 Mustang Modifications!
67ChevyRedneck is offline   Reply With Quote
Old 04-27-2009, 05:18 PM   #4
JohnC
Registered User
 
JohnC's Avatar
 
Join Date: Feb 2009
Location: Oklahoma
Posts: 7,461
Re: Anyone runing a HD hood on 1/2 tone?

The guy here in town that has it looks really cool. It's one of those things that you look at, and have to think what is different.
JohnC is offline   Reply With Quote
Old 04-27-2009, 05:39 PM   #5
tvblazer78
Low & Fast!
 
tvblazer78's Avatar
 
Join Date: Jan 2007
Location: Knoxville, TN
Posts: 3,110
Re: Anyone runing a HD hood on 1/2 tone?

Thanks man for your help, just let us know what he did. And I took a pic of this one, very cool looking truck..


Last edited by tvblazer78; 04-27-2009 at 05:39 PM.
tvblazer78 is offline   Reply With Quote
Old 04-28-2009, 01:32 AM   #6
DirtyLarry
Windy Corner of a Dirty Street
 
DirtyLarry's Avatar
 
Join Date: Jun 2003
Location: Pueblo West, Colorado
Posts: 2,926
Re: Anyone runing a HD hood on 1/2 tone?

Nothing special needs to be done. The 2001 & 2002 HD hoods fit right on to a 1999 through 2002 non-HD without any modifications to the latches, grill or bumper.

The raised HD style hood (both HD and non-HD) from 2005 & 2006 also fit 2003-2004 non-HD without any modifications as well.

To make things confusing, 2003 & 2004 HD hoods were the same as non-HD’s (low hoods) while 2005 and 2006 HD and non-HD had the raised hood.
DirtyLarry is offline   Reply With Quote
Old 04-28-2009, 09:26 AM   #7
JohnC
Registered User
 
JohnC's Avatar
 
Join Date: Feb 2009
Location: Oklahoma
Posts: 7,461
Re: Anyone runing a HD hood on 1/2 tone?

Talked to the guy and that's what he said. Nothing done besides changing hoods. He said if you put the HD bumper on, then you had to change the grille, but not for the hood. Hope this helps ya out. It is a really cool looking mod.
JohnC is offline   Reply With Quote
Old 04-28-2009, 01:00 PM   #8
84 400
Sb 400 club
 
84 400's Avatar
 
Join Date: Nov 2005
Location: NH / MA
Posts: 2,746
Re: Anyone runing a HD hood on 1/2 tone?

Cool I wanted to do this on our 2000 tahoe.
__________________
1984 chevy c10, built 400sb,.(SOLD)
77 K10 Project / daily driver "The Grinch" http://67-72chevytrucks.com/vboard/s...d.php?t=318363
1956 Willys Wagon (327 chevy) Project (Now Buick 225)
1980 Corvette L-48 4 speed
1992 Mustang GT built 5.0 5 speed

1985 C10 LWB Sold
1982 K10 SWB plow truck Parted out
1986 D30 M1028 fire brush truck Parted out
84 400 is offline   Reply With Quote
Old 04-29-2009, 09:23 AM   #9
JohnC
Registered User
 
JohnC's Avatar
 
Join Date: Feb 2009
Location: Oklahoma
Posts: 7,461
Re: Anyone runing a HD hood on 1/2 tone?

No problem glad I could help.
JohnC is offline   Reply With Quote
Old 04-29-2009, 10:29 AM   #10
tvblazer78
Low & Fast!
 
tvblazer78's Avatar
 
Join Date: Jan 2007
Location: Knoxville, TN
Posts: 3,110
Re: Anyone runing a HD hood on 1/2 tone?

Found one more, this is my front end. Looks killer..
Attached Images
 
tvblazer78 is offline   Reply With Quote
Old 05-04-2009, 09:04 AM   #11
GCncsuHD
Charlie Daniels w/ a Tq Wrench
 
GCncsuHD's Avatar
 
Join Date: May 2009
Location: Statesville, NC
Posts: 1,570
Re: Anyone runing a HD hood on 1/2 tone?

Quote:
Originally Posted by DirtyLarry View Post
Nothing special needs to be done. The 2001 & 2002 HD hoods fit right on to a 1999 through 2002 non-HD without any modifications to the latches, grill or bumper.

The raised HD style hood (both HD and non-HD) from 2005 & 2006 also fit 2003-2004 non-HD without any modifications as well.

To make things confusing, 2003 & 2004 HD hoods were the same as non-HD’s (low hoods) while 2005 and 2006 HD and non-HD had the raised hood.
You are right about the 01-02 Chevy hood fitting on to 99-02 Chevy's with no modifications.

BUT you are wrong about the newer hoods. 2003 and 2004 there was absolutely no difference between HD and non HD hoods and grilles. The only difference was the taller bumper cap on the HDs to overcome the 2" body raise.

2005 The HD got the taller HD grille, and a different grille.. While the hood will fit onto 03-05 non HDs it will not fit the grille properly, although the HD grille can also be swapped to make it work.

In 06 and 07 the half tons also got the same grille and hood as the 05 HD.

Quote:
Originally Posted by tvblazer78 View Post
Found one more, this is my front end. Looks killer..
There was never a GMC HD hood made. All 01-07 GMC 2500HDs shared the exact same hood as the half tons. BUT, the Chevy hood will bolt right on, and match the grille BUT it will not match the headlights. You must cut out the shape of the headlights into the front of the hood, and leave a little extra material over to bend over and weld in the seam. If you are really interested in the swap, a member Bgray on gmfullsize.com did the swap and it came out amazing, I always wanted to do the swap if I ever got the $$ to do a full repaint on my 03 GMC.

But also on the topic of GMCs, a 03-07 GMC grille will fit right onto the older 99-02, and updates the look of the front end in my opinion.

Also in the case of a 99-02 truck, if you install a 2" body lift and don't use the front bumper raise brackets, the HD grille and bumper cap fit right on.


Last edited by GCncsuHD; 05-04-2009 at 09:08 AM.
GCncsuHD is offline   Reply With Quote
Old 05-04-2009, 11:01 AM   #12
DirtyLarry
Windy Corner of a Dirty Street
 
DirtyLarry's Avatar
 
Join Date: Jun 2003
Location: Pueblo West, Colorado
Posts: 2,926
Re: Anyone runing a HD hood on 1/2 tone?

Welcome to the forums GCncsuHD!

Quote:
BUT you are wrong about the newer hoods. 2003 and 2004 there was absolutely no difference between HD and non HD hoods and grilles
Go back and read my post again. You and I are saying the same thing.

Quote:
2005 The HD got the taller HD grille, and a different grille.. While the hood will fit onto 03-05 non HDs it will not fit the grille properly, although the HD grille can also be swapped to make it work.
Here is a 2003/2004 HD with a 2005/2006 hood. Looks like it fits pretty nice to me. Maybe a little gap where the vertical bar met the hood.
Attached Images
 
DirtyLarry is offline   Reply With Quote
Old 06-12-2009, 01:41 PM   #13
JohnC
Registered User
 
JohnC's Avatar
 
Join Date: Feb 2009
Location: Oklahoma
Posts: 7,461
Re: Anyone runing a HD hood on 1/2 tone?

Quote:
Originally Posted by GCncsuHD View Post
..... the newer hoods. 2003 and 2004 there was absolutely no difference between HD and non HD hoods and grilles. The only difference was the taller bumper cap on the HDs to overcome the 2" body raise.

2005 The HD got the taller HD grille, and a different grille.. While the hood will fit onto 03-05 non HDs it will not fit the grille properly, although the HD grille can also be swapped to make it work.

In 06 and 07 the half tons also got the same grille and hood as the 05 HD.
Yep this is why.

Last edited by JohnC; 06-12-2009 at 01:42 PM.
JohnC is offline   Reply With Quote
Old 05-12-2009, 04:06 AM   #14
nekkidhillbilly
Account Suspended
 
Join Date: Apr 2009
Location: hazard, ky
Posts: 1,674
Re: Anyone runing a HD hood on 1/2 tone?

Quote:
Originally Posted by tvblazer78 View Post
Found one more, this is my front end. Looks killer..
thats on a sierra they have to be cut aroudn the lights to work on them but other than that direct bolt on
nekkidhillbilly is offline   Reply With Quote
Old 05-13-2009, 03:19 PM   #15
tvblazer78
Low & Fast!
 
tvblazer78's Avatar
 
Join Date: Jan 2007
Location: Knoxville, TN
Posts: 3,110
Re: Anyone runing a HD hood on 1/2 tone?

Good info GCncsuHD! Thanks for the help man and welcome..
tvblazer78 is offline   Reply With Quote
Old 06-13-2009, 12:23 AM   #16
70k52wd
Blaze-Air
 
70k52wd's Avatar
 
Join Date: Nov 2008
Location: Virginia
Posts: 1,117
Re: Anyone runing a HD hood on 1/2 tone?

Quote:
Originally Posted by tvblazer78 View Post
Found one more, this is my front end. Looks killer..
That is a kick butt looking truck. GMC grill.
70k52wd is offline   Reply With Quote
Old 05-14-2009, 10:02 PM   #17
Rudy67chevy
rudy67chevy
 
Rudy67chevy's Avatar
 
Join Date: Jun 2007
Location: Cali
Posts: 154
Re: Anyone runing a HD hood on 1/2 tone?

Do you need the hood hinge off a 2500 for the hood to fit on a 02 chevy. or can i use the ones i have on my 1500 silverado
Rudy67chevy is offline   Reply With Quote
Old 05-30-2009, 04:58 PM   #18
cstm68
Registered User
 
cstm68's Avatar
 
Join Date: Jan 2007
Location: shoreline, wa
Posts: 1,565
Re: Anyone runing a HD hood on 1/2 tone?

where is the best place to get a stock hd hood besides the dealer??
__________________
68 swb fleet bagged on 20's 327 with 4 speed http://67-72chevytrucks.com/vboard/s...d.php?t=223308
2014 Chevy 2500hd duramax CCLB
cstm68 is offline   Reply With Quote
Old 05-31-2009, 12:47 AM   #19
Rudy67chevy
rudy67chevy
 
Rudy67chevy's Avatar
 
Join Date: Jun 2007
Location: Cali
Posts: 154
Re: Anyone runing a HD hood on 1/2 tone?

It's hard to find a used one. And i work at a auto salvage yard. Am thinking of going with the aftermarket hood
Rudy67chevy is offline   Reply With Quote
Old 06-08-2009, 09:21 PM   #20
GCncsuHD
Charlie Daniels w/ a Tq Wrench
 
GCncsuHD's Avatar
 
Join Date: May 2009
Location: Statesville, NC
Posts: 1,570
Re: Anyone runing a HD hood on 1/2 tone?

Quote:
Originally Posted by Rudy67chevy View Post
Do you need the hood hinge off a 2500 for the hood to fit on a 02 chevy. or can i use the ones i have on my 1500 silverado
Nopr, direct swap with your 1500 chevy hood, use all stock hardware/hinges/latch/underhood light.
Quote:
Originally Posted by cstm68 View Post
where is the best place to get a stock hd hood besides the dealer??
Quote:
Originally Posted by Rudy67chevy View Post
It's hard to find a used one. And i work at a auto salvage yard. Am thinking of going with the aftermarket hood
Certifit has an aftermarket one for very cheap, less than $200 last time I looked.
GCncsuHD is offline   Reply With Quote
Old 06-11-2009, 10:17 PM   #21
Yullose
Registered User
 
Join Date: Dec 2007
Location: Mooresville, NC
Posts: 76
Re: Anyone runing a HD hood on 1/2 tone?

Good info in this thread.

I have a 2003 K2500HD and wondered if the correct hood was on it... I have the low/flat hood.
My brother has a 2006 K1500 and his has the tall raised hood.

The posts above, confirm everything is correct.

Here is my 03 HD:

Last edited by Yullose; 06-11-2009 at 10:18 PM.
Yullose is offline   Reply With Quote
Old 06-13-2009, 12:11 AM   #22
GCncsuHD
Charlie Daniels w/ a Tq Wrench
 
GCncsuHD's Avatar
 
Join Date: May 2009
Location: Statesville, NC
Posts: 1,570
Re: Anyone runing a HD hood on 1/2 tone?

Quote:
Originally Posted by Yullose View Post
Good info in this thread.

I have a 2003 K2500HD and wondered if the correct hood was on it... I have the low/flat hood.
My brother has a 2006 K1500 and his has the tall raised hood.

The posts above, confirm everything is correct.

Here is my 03 HD:
[IMG]http://i214.photobucket.com/albums/cc83/yullose/DSC070332.jpg[IMG]
Yes you have the correct hood, 03 and 04 there was no difference between half ton and HD hoods. In 05 the HDs got the taller hood and double bar grille. In 06 the half tons got the same hood and grille as the HDs.

Last edited by GCncsuHD; 06-13-2009 at 12:12 AM.
GCncsuHD is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 12:42 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com