All these lowered trucks ??

[barthmonster]

I'm not saying I don't like it, sometimes they look cool. But...

Remember in '64 the Vette came out without the 'split-window' in the back like the '63 had ?? All the '63 owners ran out and had their local bodyshop cut out the 'split' in the back window so they could be like the '64...

That's kind of what it reminds me of... Then in the 80's, they became highly sought-after if the weren't cut-up (the '63's) and everyone had their bodyman put the split back in.

Are all of you guys making trucks that will have to be raised again in 15-years ??

[cdowns]

i've been lowering and raking trucks over 45years never put one back to stock in that whole time

[67ChevyRedneck]

Spindles and springs are a heck of a lot easier than replacing a fiberglass rear window split.

Like cdowns said, people have been lowering cars/trucks for a Loooooooooooooooong time!

My truck is so far from stock I could car less about putting it back to stock.

[jbristo67]

Originally Posted by 67ChevyRedneck

Spindles and springs are a heck of a lot easier than replacing a fiberglass rear window split.

Like cdowns said, people have been lowering cars/trucks for a Loooooooooooooooong time!

My truck is so far from stock I could car less about putting it back to stock.

Word lol I have been lowering trucks for 12 years myself this isnt really something new

[mrein3]

I am saying I don't like it.
IMO, I think lowered trucks look ridiculous. Again that is my opinion.
I will state that if you are going to lower a truck, a 67-72 Chevy, short wheel base, fleetside looks the best of all the lowered trucks out there.
I've seen the 73+ trucks 'in the weeds' and have to reach for the barf bag.
Then you see a 88+, extended cab and I can't reach fast enough so I have to hose the barf out from under my truck seat.
Then you see an S10 and I just laugh at the money spent to make such an ugly stance on an ugly vehicle.

But to each his own.

[67ChevyRedneck]

Originally Posted by mrein3

I am saying I don't like it.
IMO, I think lowered trucks look ridiculous. Again that is my opinion.
I will state that if you are going to lower a truck, a 67-72 Chevy, short wheel base, fleetside looks the best of all the lowered trucks out there.
I've seen the 73+ trucks 'in the weeds' and have to reach for the barf bag.
Then you see a 88+, extended cab and I can't reach fast enough so I have to hose the barf out from under my truck seat.
Then you see an S10 and I just laugh at the money spent to make such an ugly stance on an ugly vehicle.

But to each his own.

Wow, tell us how you really feel

[jbristo67]

Originally Posted by mrein3

I am saying I don't like it.
IMO, I think lowered trucks look ridiculous. Again that is my opinion.
I will state that if you are going to lower a truck, a 67-72 Chevy, short wheel base, fleetside looks the best of all the lowered trucks out there.
I've seen the 73+ trucks 'in the weeds' and have to reach for the barf bag.
Then you see a 88+, extended cab and I can't reach fast enough so I have to hose the barf out from under my truck seat.
Then you see an S10 and I just laugh at the money spent to make such an ugly stance on an ugly vehicle.

But to each his own.

I do agree on the s 10's though

[Hammer57]

Originally Posted by jbristo67

I do agree on the s 10's though

[69C-10SWB]

Originally Posted by mrein3

I am saying I don't like it.
IMO, I think lowered trucks look ridiculous. Again that is my opinion.
I will state that if you are going to lower a truck, a 67-72 Chevy, short wheel base, fleetside looks the best of all the lowered trucks out there.
I've seen the 73+ trucks 'in the weeds' and have to reach for the barf bag.
Then you see a 88+, extended cab and I can't reach fast enough so I have to hose the barf out from under my truck seat.
Then you see an S10 and I just laugh at the money spent to make such an ugly stance on an ugly vehicle.

But to each his own.

I personally like near stock height for a 2-wheel drive. Stock or lifted looks good on 4x4. With the crappy Michigan roads to low of a truck can be hard on the hemorrhoids as well as the truck itself.

[redneckgirl]

Originally Posted by mrein3

I am saying I don't like it.
IMO, I think lowered trucks look ridiculous. Again that is my opinion.
I will state that if you are going to lower a truck, a 67-72 Chevy, short wheel base, fleetside looks the best of all the lowered trucks out there.
I've seen the 73+ trucks 'in the weeds' and have to reach for the barf bag.
Then you see a 88+, extended cab and I can't reach fast enough so I have to hose the barf out from under my truck seat.
Then you see an S10 and I just laugh at the money spent to make such an ugly stance on an ugly vehicle.But to each his own.

First, let me say I'm NOT singling you out, merely your post was the easiest to quote and point out a few things.
1. While we all have opinions some are better worded than others.
2. There are some damn nice trucks on this site of all years & models. Whether it be N2TRUX show quality, highly visible squarebody (lowered BTW), or MUDDER's kick ass 4X4 that most folks would need a step ladder to climb in... or a certain little S10 I was lucky enough to see in NC for the spring meet.
While there are a few trucks on here that I simply do not like, I would NEVER insult them by calling them ridiculous, barf-inducing wastes of money. That is disrespectful.
If anyone else feels the need to go to this degree to make thier point in this thread, move on & don't post.

My truck is lowered. It is the first one (besides an S10 we used to own) that has ever been lowered. I can appreciate the lowered ones, the spark-throwing slammed ones, the 'beaters', the original restorations & the 4X4's that should have a red blinking light on top to warn approaching aircraft. The are all pieces of automotive history. What the individual owner does with it is thier prerogative.
If you were driving down the road and saw the most hideous, eyesore that someone calls home, would you dare approach the door and tell them it made you barf? I don't think so.
These threads NEVER end well...I'm asking you guys to keep it civil, or it will go bye-bye.

[crawdadfox]

Originally Posted by mrein3

I am saying I don't like it.
IMO, I think lowered trucks look ridiculous. Again that is my opinion.
I will state that if you are going to lower a truck, a 67-72 Chevy, short wheel base, fleetside looks the best of all the lowered trucks out there.
I've seen the 73+ trucks 'in the weeds' and have to reach for the barf bag.
Then you see a 88+, extended cab and I can't reach fast enough so I have to hose the barf out from under my truck seat.
Then you see an S10 and I just laugh at the money spent to make such an ugly stance on an ugly vehicle.

But to each his own.

I couldn't agree with you more....especially about the 73+ trucks!! You know everyone has an opinion on what looks good and what doesn't....sometimes its just better to keep that opinion to yourself!

[Gray Ghost]

Originally Posted by mrein3

I am saying I don't like it.
IMO, I think lowered trucks look ridiculous. Again that is my opinion.
I will state that if you are going to lower a truck, a 67-72 Chevy, short wheel base, fleetside looks the best of all the lowered trucks out there.
I've seen the 73+ trucks 'in the weeds' and have to reach for the barf bag.
Then you see a 88+, extended cab and I can't reach fast enough so I have to hose the barf out from under my truck seat.
Then you see an S10 and I just laugh at the money spent to make such an ugly stance on an ugly vehicle.

But to each his own.

Yeah, never was much of a fad follower myself.

Too low [past 2/4] doesn't look good....the proportion is lost and in the weeds....well that just ain't right for a truck. Seen the 1-ton duallys lowered yet? That'll surely drive you as nuts as it does me.

[Acloud]

The trick is to own a lowered blazer and a raised truck!!

[67ChevyRedneck]

^WHAT?

[jbristo67]

I dont know he evoked to many emotions for me lol. I guess this unemployment vacation is starting to get to me.

[So.Cal.Super]

Yup it's all about what you like. I look at it like this.
2wd put it on the ground
4wd put it in the air.


"You can please some of the people some of the time, all of the people some of the time, some of the people all of the time, but you can never please all of the people all of the time." - Abe Lincoln

[tcb-1]

to each thier own. got more info on the modified Vettes?? I'd LOVE to hear more about this one......

I could care less what people think now or in 50 years. if I like my truck slammed, which I do, I will deal with the consequences. I've even modified my frame. oh now that's really scary......

lowering vehicles has been around since our service men and women came back from WW2. that's not exactly a trend.

stock, lowered, or raised. who cares as long as you like it. you are the one footing the bill.

this one could get ugly quick......

[72BlckButy]

Originally Posted by tcb-1

to each thier own. got more info on the modified Vettes?? I'd LOVE to hear more about this one......

I could care less what people think now or in 50 years. if I like my truck slammed, which I do, I will deal with the consequences. I've even modified my frame. oh now that's really scary......

lowering vehicles has been around since our service men and women came back from WW2. that's not exactly a trend.

stock, lowered, or raised. who cares as long as you like it. you are the one footing the bill.

this one could get ugly quick......

I have to agree with Doug, I can appreciate anything that is done to modify a vehicle, regardless of how I truly feel about the modification. To each their own...

As long as this thread stays positive it will be able to stay open. Everyone has their own opinions, but like Doug mentioned I don't forsee lowering going away anytime soon. Heck this hobby exploded when the service men and women returned from WW2 (also mentioned by Doug). Personal preference is key.

Where would this hobby be today if they hadn't... we might be talking about customizing our sewing machines and trying to keep them running.

[Acloud]

everyone stay calm, we can work through this, dropped, stock or raised its all important to the world.

[magsnubby]

Originally Posted by barthmonster

Are all of you guys making trucks that will have to be raised again in 15-years ??

No. Never. Not in this life time. At any show'll usually walk right by a stock height truck and head straight for a lowered one. Just my preference. But i won't hate on it because the owner's vision differs from mine.

Threads like this always remind me of an old small town Model A restorer i used to know. We were checking out the '29 Model A pickup he and his son were restoring and i asked him "Have you saw the Model A coupe running around town?" "Yes but it isn't an authentic restoration. It has fiberglass fenders." Now were talking a ground up resto on a basket case A that was an absolutely beautiful car. But the snob restorer put it down because it had 'glass fenders. Then he goes on to tell me "We were extremely fortunate to purchase such a nice original truck. We purchased it from a young man who was, horror of horrors, going to HOT ROD IT." I pretty much ignored him after that.

[sjarrett71]

I will lower my truck a little bit when the time comes but I can't too much. All the parking lot entrances from the street have high angles on them and I would leave metal every time I pulled off the road if I was too low. I like a truck lowered a little bit though.

[my67chevytruck]

Nate, can you Sew a couple of my shirts for me..... Please use the foot operated Singer.....

[72BlckButy]

As funny as that is... we actually just picked one of those things up when I found my cooler in St Louis. I will get to work on it, just send me your shoulder width, arm leng.....

Okay back to trucks now!

[my67chevytruck]

all good Nate no one reads these anyway......

[72BlckButy]

I know I'll pick up the nickname of singer, needle, thread,... oh I can hear it now.