![]() |
|
![]() |
#1 |
Between Trucks...
Join Date: Mar 2002
Location: Los Angeles, CA.
Posts: 3,830
|
![]()
Anybody know what size the socket is for removing the nut when removing the hub/drum from an Eaton HO52?
__________________
Beat it to fit, Paint it to match... ![]() Last edited by Sinister; 05-17-2009 at 11:37 AM. |
![]() |
![]() |
![]() |
#2 |
Registered User
![]() Join Date: Nov 2007
Location: Turlock California 95380
Posts: 2,075
|
Re: Socket size for HO52
Not sure about the ho52. My dana60 nut is 2 3/8" IIRC. I guess to find out for sure pull the axle and measure the nut.
__________________
72 C20 Longbed 05 1500 Z71 |
![]() |
![]() |
![]() |
#3 |
Registered User
![]() Join Date: Nov 2007
Location: Turlock California 95380
Posts: 2,075
|
Re: Socket size for HO52
this is what I borrowed from a friend to do mine. Its this or he said use a brass punch & hammer to loosen it out. I dont like the idea of banging the nut loose and tightening it back up with a punch. Hope this helps.
Maybe someone here knows if they have the same size nut ? http://www.napaonline.com/NOLPPSE/(S...434_0006402220
__________________
72 C20 Longbed 05 1500 Z71 Last edited by sleepertruck72; 05-17-2009 at 02:19 PM. |
![]() |
![]() |
![]() |
#4 |
Between Trucks...
Join Date: Mar 2002
Location: Los Angeles, CA.
Posts: 3,830
|
Re: Socket size for HO52
Well, I was going out to the scrapyard and wanted to have the socket before hand, but all they had was Dana 60's on the C-20's.
__________________
Beat it to fit, Paint it to match... ![]() Last edited by Sinister; 05-17-2009 at 02:19 PM. |
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Nov 2008
Location: Carmel, IN
Posts: 187
|
Re: Socket size for HO52
They aren't very tight, for a junkyard salvage, hammer and punch is fine, I would get the socket to put them back on.
|
![]() |
![]() |
![]() |
Bookmarks |
|
|