OR 4x4 1/2 ton axles 1976 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

prg machine · 05-21-2009, 09:52 PM

3:73 gears front disc. front and rear both for 250.00 dollars great shape

prg machine · 06-01-2009, 08:34 PM

ttt

prg machine · 09-19-2009, 10:35 PM

How about 175??? Thats for 2 axles guys!!!!!

JMac11 · 09-20-2009, 08:17 AM

Killing me here in Tallahassee.... the freight would ruin the deal..... TTT for ya

prg machine · 09-20-2009, 10:17 AM

have some one pick them up maybe????

62 short step · 09-20-2009, 10:17 AM

Of course on the other side of the USA.TTT for you.

msgross · 09-20-2009, 10:33 AM

good deal for someone, probably has flattop knuckles too...

ttt for you

*nekkidhillbilly* · 09-21-2009, 10:42 AM

y is nothing good close

prg machine · 01-23-2010, 03:14 PM

100.00

66coffin · 01-24-2010, 01:35 PM

you're killing me, you wanna move to beautiful southern california....? just bring the rear axle with ya.

prg machine · 01-29-2010, 01:02 PM

so drive up and get em! I'm throwing in the ralley wheels as well.

prg machine · 01-29-2010, 01:03 PM

Thats FRONT and REAR!

prg machine · 01-30-2010, 10:42 PM

I just filled out the paper work to haul these to the scrap yard. That's the new law up here. Gotta fill out paper workm to haul off all of your treasures. Don't get caught on the road with anything metal without paper work. or it's 30 days Jail!!!!!
Ya gotta tell the whole story where they came from and all!!!

They keep records and they take pictures at the scrap yard.

So.......... if no one wants em............. off they go!!!!!!!!!!

worse yet i am gonna use em ina a JEEEEEEEEP CONVERSION!!!!!!!!!!!

Twisted78SS · 02-15-2010, 08:34 PM

Still have them?

prg machine · 02-17-2010, 01:14 PM

15 minutes out of Medford.

Twisted78SS · 02-17-2010, 01:24 PM

Rats,

I am over in Vancouver area, a bit of a haul..

I hope you get them sold.. Good luck!

prg machine · 02-18-2010, 05:44 PM

50 bucks and haul em off

05-21-2009, 09:52 PM	#1
prg machine Registered User Join Date: Jun 2007 Location: oregon Posts: 1,069	4x4 1/2 ton axles 1976 3:73 gears front disc. front and rear both for 250.00 dollars great shape __________________ 69 K-20 cloned to a 67 with front clip and some other stuff. 383 .040 over Crane roller cam lifters and rockers ,1.6 intake ratio, Open chamber heads, 9.5-1 compression ratio, 2.02 intake valves , Edelbrock performer Air Gap manifold Carter AFB performer 750cfm, MSD ignition, SM465 NP205 4.10 gears:

06-01-2009, 08:34 PM	#2
prg machine Registered User Join Date: Jun 2007 Location: oregon Posts: 1,069	Re: 4x4 1/2 ton axles 1976 ttt __________________ 69 K-20 cloned to a 67 with front clip and some other stuff. 383 .040 over Crane roller cam lifters and rockers ,1.6 intake ratio, Open chamber heads, 9.5-1 compression ratio, 2.02 intake valves , Edelbrock performer Air Gap manifold Carter AFB performer 750cfm, MSD ignition, SM465 NP205 4.10 gears:

09-19-2009, 10:35 PM	#3
prg machine Registered User Join Date: Jun 2007 Location: oregon Posts: 1,069	Re: 4x4 1/2 ton axles 1976 How about 175??? Thats for 2 axles guys!!!!! __________________ 69 K-20 cloned to a 67 with front clip and some other stuff. 383 .040 over Crane roller cam lifters and rockers ,1.6 intake ratio, Open chamber heads, 9.5-1 compression ratio, 2.02 intake valves , Edelbrock performer Air Gap manifold Carter AFB performer 750cfm, MSD ignition, SM465 NP205 4.10 gears:

09-20-2009, 08:17 AM	#4
JMac11 Registered User Join Date: May 2005 Location: Tallahassee Fl Posts: 773	Re: 4x4 1/2 ton axles 1976 Killing me here in Tallahassee.... the freight would ruin the deal..... TTT for ya

09-20-2009, 10:17 AM	#5
prg machine Registered User Join Date: Jun 2007 Location: oregon Posts: 1,069	Re: 4x4 1/2 ton axles 1976 have some one pick them up maybe???? __________________ 69 K-20 cloned to a 67 with front clip and some other stuff. 383 .040 over Crane roller cam lifters and rockers ,1.6 intake ratio, Open chamber heads, 9.5-1 compression ratio, 2.02 intake valves , Edelbrock performer Air Gap manifold Carter AFB performer 750cfm, MSD ignition, SM465 NP205 4.10 gears:

09-20-2009, 10:17 AM	#6
62 short step Senior Member Join Date: Aug 2005 Location: Greenwell Springs, Louisiana Posts: 2,882	Re: 4x4 1/2 ton axles 1976 Of course on the other side of the USA.TTT for you. __________________ www.louisianaclassictruckclub.com 1965 c-10 86 chevy c/k 20

09-20-2009, 10:33 AM	#7
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: 4x4 1/2 ton axles 1976 good deal for someone, probably has flattop knuckles too... ttt for you __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

09-21-2009, 10:42 AM	#8
nekkidhillbilly Account Suspended Join Date: Apr 2009 Location: hazard, ky Posts: 1,674	Re: 4x4 1/2 ton axles 1976 y is nothing good close

01-23-2010, 03:14 PM	#9
prg machine Registered User Join Date: Jun 2007 Location: oregon Posts: 1,069	Re: 4x4 1/2 ton axles 1976 100.00 __________________ 69 K-20 cloned to a 67 with front clip and some other stuff. 383 .040 over Crane roller cam lifters and rockers ,1.6 intake ratio, Open chamber heads, 9.5-1 compression ratio, 2.02 intake valves , Edelbrock performer Air Gap manifold Carter AFB performer 750cfm, MSD ignition, SM465 NP205 4.10 gears:

01-24-2010, 01:35 PM	#10
66coffin Registered User Join Date: Dec 2009 Location: diamond bar, calif. Posts: 206	Re: 4x4 1/2 ton axles 1976 you're killing me, you wanna move to beautiful southern california....? just bring the rear axle with ya. __________________ '66 c10ish straight 292 power!

01-29-2010, 01:02 PM	#11
prg machine Registered User Join Date: Jun 2007 Location: oregon Posts: 1,069	Re: 4x4 1/2 ton axles 1976 so drive up and get em! I'm throwing in the ralley wheels as well. __________________ 69 K-20 cloned to a 67 with front clip and some other stuff. 383 .040 over Crane roller cam lifters and rockers ,1.6 intake ratio, Open chamber heads, 9.5-1 compression ratio, 2.02 intake valves , Edelbrock performer Air Gap manifold Carter AFB performer 750cfm, MSD ignition, SM465 NP205 4.10 gears:

01-29-2010, 01:03 PM	#12
prg machine Registered User Join Date: Jun 2007 Location: oregon Posts: 1,069	Re: 4x4 1/2 ton axles 1976 Thats FRONT and REAR! __________________ 69 K-20 cloned to a 67 with front clip and some other stuff. 383 .040 over Crane roller cam lifters and rockers ,1.6 intake ratio, Open chamber heads, 9.5-1 compression ratio, 2.02 intake valves , Edelbrock performer Air Gap manifold Carter AFB performer 750cfm, MSD ignition, SM465 NP205 4.10 gears:

01-30-2010, 10:42 PM	#13
prg machine Registered User Join Date: Jun 2007 Location: oregon Posts: 1,069	Re: 4x4 1/2 ton axles 1976 I just filled out the paper work to haul these to the scrap yard. That's the new law up here. Gotta fill out paper workm to haul off all of your treasures. Don't get caught on the road with anything metal without paper work. or it's 30 days Jail!!!!! Ya gotta tell the whole story where they came from and all!!! They keep records and they take pictures at the scrap yard. So.......... if no one wants em............. off they go!!!!!!!!!! worse yet i am gonna use em ina a JEEEEEEEEP CONVERSION!!!!!!!!!!! __________________ 69 K-20 cloned to a 67 with front clip and some other stuff. 383 .040 over Crane roller cam lifters and rockers ,1.6 intake ratio, Open chamber heads, 9.5-1 compression ratio, 2.02 intake valves , Edelbrock performer Air Gap manifold Carter AFB performer 750cfm, MSD ignition, SM465 NP205 4.10 gears:

02-15-2010, 08:34 PM	#14
Twisted78SS Wide n'Low Join Date: Jan 2007 Location: La Center, WA Posts: 1,511	Re: 4x4 1/2 ton axles 1976 Still have them? __________________ Trippin Hazard.. 67 swb, Gold Member.. 68 Suburban Air Force Retired

02-17-2010, 01:14 PM	#15
prg machine Registered User Join Date: Jun 2007 Location: oregon Posts: 1,069	Re: 4x4 1/2 ton axles 1976 15 minutes out of Medford. __________________ 69 K-20 cloned to a 67 with front clip and some other stuff. 383 .040 over Crane roller cam lifters and rockers ,1.6 intake ratio, Open chamber heads, 9.5-1 compression ratio, 2.02 intake valves , Edelbrock performer Air Gap manifold Carter AFB performer 750cfm, MSD ignition, SM465 NP205 4.10 gears:



Register or Log In To remove these advertisements.

02-17-2010, 01:24 PM	#16
Twisted78SS Wide n'Low Join Date: Jan 2007 Location: La Center, WA Posts: 1,511	Re: 4x4 1/2 ton axles 1976 Rats, I am over in Vancouver area, a bit of a haul.. I hope you get them sold.. Good luck! __________________ Trippin Hazard.. 67 swb, Gold Member.. 68 Suburban Air Force Retired

02-18-2010, 05:44 PM	#17
prg machine Registered User Join Date: Jun 2007 Location: oregon Posts: 1,069	Re: 4x4 1/2 ton axles 1976 50 bucks and haul em off __________________ 69 K-20 cloned to a 67 with front clip and some other stuff. 383 .040 over Crane roller cam lifters and rockers ,1.6 intake ratio, Open chamber heads, 9.5-1 compression ratio, 2.02 intake valves , Edelbrock performer Air Gap manifold Carter AFB performer 750cfm, MSD ignition, SM465 NP205 4.10 gears:

Register or Log In To remove these advertisements.