Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
|
05-22-2009, 03:24 PM | #1 |
Registered User
Join Date: Jun 2008
Location: Kalispell Montana
Posts: 34
|
Best 350 crate motor / company?
Fellas,
My '72 will need a motor soon, the '80 engine in it is not original but has been rebuilt once already. I was looking for a suitable engine, won't be a street rod, but the truck is a nice 4x4 Cheyenne Super. I'd like it to be able to giddy up a little. I've been looking at all kinds of sites, Edelbrock, Jegs, GM Performance, anyone have any experience / feedback with any crate motor I'd appreciate it if you would share. Thanks! Scott |
05-22-2009, 04:30 PM | #2 |
Jason
Join Date: Sep 2008
Location: Wetumpka, AL
Posts: 152
|
Re: Best 350 crate motor / company?
I would go with GM Performance. I purchased a Goodwrench 350 part# 10067353 and installed a Comp Cams XE262h camshaft. It ran very strong in my 71 C-10 before I sold it to fund my new big block. You will not be disapounted with any GM crate motor in my opinion!!!
|
05-22-2009, 04:36 PM | #3 |
Between Trucks...
Join Date: Mar 2002
Location: Los Angeles, CA.
Posts: 3,830
|
Re: Best 350 crate motor / company?
YearOne has some nice crate motors.
http://www.yearone.com
__________________
Beat it to fit, Paint it to match... |
05-22-2009, 09:34 PM | #4 |
Registered User
Join Date: Jun 2008
Location: Kalispell Montana
Posts: 34
|
Re: Best 350 crate motor / company?
Bump. Thanks.
|
05-22-2009, 09:39 PM | #5 |
Registered User
Join Date: Jan 2008
Location: Tejas
Posts: 691
|
Re: Best 350 crate motor / company?
Try Blue print engines. Summit sells them.
__________________
'72 cheyenne super step, '05 long bed gmc |
05-22-2009, 09:59 PM | #6 |
Watch out for your cornhole !
Join Date: Jun 2003
Location: Azle, Texas
Posts: 14,162
|
Re: Best 350 crate motor / company?
GM crate 350- 3 year 100k mile warranty. Any GM dealer in the country will warranty it on the spot too.
__________________
I'm on the Instagram- @Gearhead_Kevin |
05-22-2009, 10:11 PM | #7 |
Registered User
Join Date: Feb 2009
Location: minonk illinois
Posts: 224
|
Re: Best 350 crate motor / company?
sorry to chip this opinion in, but I just wish you would consider a motor built in your town or county at least, keep your money close to home crate motors are no guarantee you wont have trouble and has anyone you know gotten one warranted, I have seen it and its usually time consuming and requires you to pay labor and for second engine leaving it up to them to decide if you will be refunded. I say stop by a machine shop ask around. Lots of guys know how to build sbc cheap and strong!!!!! without chinese parts or mexican labor!!! If this advise sucks so far just buy an edelbrock its made in usa!!!
|
05-22-2009, 10:25 PM | #8 | |
Watch out for your cornhole !
Join Date: Jun 2003
Location: Azle, Texas
Posts: 14,162
|
Re: Best 350 crate motor / company?
Quote:
__________________
I'm on the Instagram- @Gearhead_Kevin |
|
05-22-2009, 11:01 PM | #9 |
Senior Member
Join Date: Dec 2006
Location: Studio City, Calif.
Posts: 2,883
|
Re: Best 350 crate motor / company?
nevr mind,was off topic
__________________
'69 GMC C2500 Custom Camper, 8 1/2' bed, New GM 350, NP 435 Close Ratio 4spd. Trans., 3.73 Dana-60 open.Camper and Trailer wiring, PS, PB, AC, tach , three gas tanks, stereo speakers, 2nd owner, Work-Truck supreme. Last edited by WorkinLonghorn; 05-22-2009 at 11:04 PM. |
05-26-2009, 05:24 PM | #10 | |
Junior Member
Join Date: Mar 2007
Location: Hideaway, TX
Posts: 4,950
|
Re: Best 350 crate motor / company?
Quote:
Do you know who the dealer was that use to advertise crate motors in the NTX Truck Trader? I beleive they were in Fort Worth. They quoted my a price of $450 to install one about 3 years ago.
__________________
71 Suburban 350/700R4 Project Trixie 72 CHEVY,Highlander,SWB,396,T400 |
|
05-27-2009, 09:51 PM | #11 |
Registered User
Join Date: Aug 2008
Location: Sunny Arizona
Posts: 525
|
Re: Best 350 crate motor / company?
I'm installing a 290 horse GM Perf. crate with the Eldebrock power package. It supposedly puts out 330 at 5500 if I remember right. I will find out how it runs by Sunday.
__________________
Nick "Everyone has a plan, 'till they get punched in the mouth".........Mike Tyson 1968, GMC, SWB, Project 1972, GMC, LWB, Daily Driver, 383, headers, 2.5"/3" exhaust, 200r4, 3.5/5 ECE components. 1972, C/10, LWB, 350 vortec, th350 |
05-23-2009, 11:15 AM | #12 | |
Registered User
Join Date: Aug 2005
Location: Pasadena,Tx /Pto Pta DR
Posts: 5,415
|
Re: Best 350 crate motor / company?
Quote:
|
|
05-22-2009, 11:11 PM | #13 |
Hittin E-Z Street on Mud Tires
Join Date: Nov 2004
Location: Greenville, SC
Posts: 23,090
|
Re: Best 350 crate motor / company?
Well, the hecho in mexico thing is a little disappointing. Didn't know that. I was going to suggest the GM crate engine as well. About $1,600 (I've been checking around, apparently they've gone up about $150 in the past year) and you'll have good horsepower and the warranty Tx mentioned. I still plan on getting one for my truck.
__________________
Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications! |
05-22-2009, 11:21 PM | #14 |
Registered User
Join Date: Jun 2008
Location: Kalispell Montana
Posts: 34
|
Re: Best 350 crate motor / company?
I've got an excellent local mechanic who can do a lot of work, but even he suggested to order what I want to the level I want and he'll do the rest.
What's this Made in Mexico stuff concerning GM motors? Is that only the GM Goodwrench 350 motors or GM Performance or other makers who use the GM blocks? How can you tell? Thanks, Scott |
05-22-2009, 11:23 PM | #15 |
Hittin E-Z Street on Mud Tires
Join Date: Nov 2004
Location: Greenville, SC
Posts: 23,090
|
Re: Best 350 crate motor / company?
I really don't know, I had always thought the GM crate engines were built/assembled here... one of the few things still done in the US.
__________________
Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications! Last edited by 67ChevyRedneck; 05-22-2009 at 11:24 PM. |
05-23-2009, 12:22 AM | #16 |
69 Fleetside
Join Date: Mar 2009
Location: Lake Stevens, WA
Posts: 333
|
Re: Best 350 crate motor / company?
Where are you finding them for $1600?
|
05-23-2009, 12:54 AM | #17 | |
Hittin E-Z Street on Mud Tires
Join Date: Nov 2004
Location: Greenville, SC
Posts: 23,090
|
Re: Best 350 crate motor / company?
http://www.sdparts.com/product/10067...ateEngine.aspx
Or any local dealer should be able to sell you one for about the same price. Only a year and a half-ish ago I was quoted $1430 for one, and the website above listed them for $1,399, but apparently GM has jacked the price in the past year. I wish I had bought one back then This is the GM part #10067353 motor. It is not a high performance motor, but very a very respectable 240-ish horsepower (ratings vary depending on who's doing the advertising.) Quote:
__________________
Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications! Last edited by 67ChevyRedneck; 05-23-2009 at 12:57 AM. |
|
05-24-2009, 09:27 AM | #18 | |
Senior Member
Join Date: Apr 2000
Location: madison indiana
Posts: 3,836
|
Re: Best 350 crate motor / company?
Quote:
last time i checked my local dealers were asking around 2200.00 for one...
__________________
jamie72 72 BB cheyenne -- Restoration getting started.. member #807 http://www.myspace.com/whitetailobsession www.antlertalk.com |
|
05-30-2009, 03:18 AM | #19 | |
Freeeeee Mason...
Join Date: Sep 2006
Location: McAlester, Oklahoma
Posts: 320
|
Re: Best 350 crate motor / company?
Quote:
__________________
Daily Driver -2007 Chevy -Dark Blue Metallic -Regular Cab -4.8 V8 -4x4 Ongoing, Never Ending, PITA, Love of my Life -69 Chevy C/10, Camper Special -350/TH400 -Loudest System on the Board |
|
05-23-2009, 07:35 AM | #20 | |
Rottenwood Garage Member
Join Date: May 2005
Location: Marietta, Georgia
Posts: 4,321
|
Re: Best 350 crate motor / company?
Quote:
The last few I saw were clearly marked "Made in Mexico" or "assembled in Mexico". It has been that way for a good while. There is always a chance of trouble with any product. I have used a couple of GM crates with good results but I also had one that lost oil pressure after 2000 miles!
__________________
2004 Chevrolet Suburban C1500 2001 Chevrolet 2500HD Crew 6.0 1999 Harley Davidson Electra Glide 1972 Chevrolet C-20 Custom Camper "Dump Truck" 1972 Chevrolet C-20 Suburban "Big Green" 1969 Chevrolet C-50 Wedge Hauler "Leonidis" 1966 C-10 2x4 short fleet 327 4 speed "Race Truck" 1952 Plymouth Cranbrook "Rican" (my grandfathers) 1931 Ford Model A Coupe "Black Beauty" 1930 Ford Model A truck "Club Cab" 4x4 Rottenwood Garage and Speed Shop.....where everything must be racy! It's not just a hobby..It's a LIFESTYLE!!! Thanks for nothing Barrett-Jackson You cant fix stupid or teach accountability! Time wasters, looky Lous and tire kickers are everywhere! |
|
05-23-2009, 11:28 AM | #21 |
Registered User
Join Date: Jul 2007
Location: SE WY
Posts: 640
|
Re: Best 350 crate motor / company?
good tread. what carb and manifold you all running on them crate motors?
__________________
72 chevy 3/4 ton 4X4 |
05-24-2009, 12:22 PM | #22 |
Hittin E-Z Street on Mud Tires
Join Date: Nov 2004
Location: Greenville, SC
Posts: 23,090
|
Re: Best 350 crate motor / company?
There are two motors that are very similar, one is around 240 horse and the other is 290. Maybe they priced you the 290 horse one? Either way, that price seems real high!
__________________
Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications! |
05-24-2009, 03:50 PM | #23 |
Senior Member
Join Date: Apr 2000
Location: madison indiana
Posts: 3,836
|
Re: Best 350 crate motor / company?
it was the 240hp...
__________________
jamie72 72 BB cheyenne -- Restoration getting started.. member #807 http://www.myspace.com/whitetailobsession www.antlertalk.com |
05-24-2009, 01:33 PM | #24 |
Registered User
Join Date: Aug 2007
Location: branson mo
Posts: 933
|
Re: Best 350 crate motor / company?
I purchased the 240 hp model for my 69. Bought i from the local dealer for 1450 plus 150 core. I hooked it up to the 3 speed manual and kept the original points.I used an Edelbrock performer intake and a Edelbrock 650 cfm carb. It had plenty of power and ran strong right till the day it was totaled.(bout 5k miles later) There are some pictures of it in my build thread of my 69 in my sig.
|
05-25-2009, 01:02 PM | #25 | |
Registered User
Join Date: Jan 2009
Location: San Antonio, Texas
Posts: 1,374
|
Re: Best 350 crate motor / company?
Quote:
__________________
1972 C10 LWB, 350/350 Deconstruction began 5/2009, mostly completed restoration, 5/2017 |
|
Bookmarks |
|
|