Whats on your 'to do' list?

[Reno's71]

I have some, quite a few!! Just wandering who is worse off than me. I hate previous owners! Maybe by seeing other people problems, my pockets wont feel so empty.

-Find mystery Trans problem
-Trim bottom front corner of fenders
-Replace missing wingnut for aircleaner
-Battery holddown
-Adjust rear brakes
-Get custom true dual exhaust with Magnaflows
-Tune carb
-Finnish primer
-Install door pannels, figure out the rusted screws..
-Install carpet/whole rest of interior
-Shop around for good stereo place for install of everything
-Gear Vendors overdrive (4.56, 35's suck on highway)
-Actual paint job, undecided color

[pokethesmot]

these arnt really in order

bed line my truck

stacks

supperswampers

air lockers

carb

new bench seat
cb radio

comp cam

h-pipe

intake manifold

lift

light bar on roof

new steps for my bed

tow hitch

winch

vortech heads

[onlyifihadachevy]

fix front end

not in order

stereo
winch in a custom bummer with rock/spot lights
different lift in rear, to coilovers hopefully
beadlocks
bed liner
new seats
cb radios
and more powerful engine be upgrading the 350 it has or build bbc or 383 it has about 300hp now i guess
And lightbar on roof

And new t case.

[dammitmitchell]

finish project without angering wife or starving children...
that's my "list"

[DESTRO]

Originally Posted by dammitmitchell

finish project without angering wife or starving children...
that's my "list"

Hey thats my list too. Seems like only one gets done though,cant figure out how to accomplish the first one.

[Rollinsqrbdy]

Heres mine- First- a 10" lift. Second some 20x10 Dick cepek wheels with 38" open countrys. Third- Paint it a nice black with a coffee color on the bottom. And last give the Truck soon vroooooom vrooooom alot of vroooooom vrooooooom hahahahahahahaha the world is mine hahahaha oops got carried away.

[thirdstreettito]

Lift front end to even out suspension
Lockers
Change all fluids
33" BFG A/T

[Eturnit3]

prepare to feel better about your small list...

Item #1 find another lift kit to order...
Item#2 Install lift (sounds like suck a small task donnit)
Item#3 Install custom winch bumper
Item#4 Replace Body Mounts
Item#5 Replace Mirrors
Item#6 Replace Ball Joints
Item#7 Replace drag link
Item#8 Replace brake pads (all around)
Item#9 Replace rear axle bearings (fronts done)
Item#10 Replace drivers side rocker
Item#11 replace rear windsheild rubber and possibly install slider
Item#12 Re-upholster seat (or replace with 4point harness type)
Item#13 Install new dash bezel and tac
Item#14 Rewire trailer lights
Item#15 Install stereo ( been putting this off forever)
Item#16 Install mastershift 3 spd floorshifter(replace indy shifter)
Item#17 Install 35"x12.5" Baja radial claws (thats gonna hurt$$)
Item#18 Replace Headers (shackle bolts are touching the headmans)
Item#19 Replace drivers side window track
Item#20 Replace all ujoints in used front driveshaft+install
Item#21 Install new alt bracket (billet side mt)
Item#22 Replace stock lap seatbelts with either shoulder type or 4-5 point harness (still undecided)
Item#23 Replace radiator (pinhole leak in mine)
Item#25 Replace plug wires (want them routed cleanly)
Item#26 Tune up (I think timings a lil off)
Item#27 Fabricate rear tailgate spare tire cage thingy (Think pre-runner mount, but replaces tailgate)
Item#28 maybe start body work lol
Item#29 Build new doghouse to live in once wife sees the bill

[onlyifihadachevy]

eturnit3 why are you going to run the mt baja claws and not the procomp xtreme all terrain i think they're almost the same design and cheaper?

[Reno's71]

Thats quite the list man. I feel a little better now. Trans problem solved (vacume of all things) , and Chevelle steering wheel installed. So thats a few off my list. BTW, I second the thought about the Claws. It seems every time Ive seen them in person on a truck, they were bald. X-AT's are

[Eturnit3]

Yeah I just liked the tread pattern and the price tag was only a grand, but Im not sold on em.... will look at the procomps, thanks guys...

[onlyifihadachevy]

i have a new to do list same as above but, save 800 for a new truck and add that stuff to both.

[Tater]

In order

figure out why my rear driveshaft keeps falling off
change my tps sensor
pop the dent out of my drivers side door(that one happened after I kicked it the last time I lost my driveshaft)
Put a new new passenger side door
new passenger side front fender
new passenger side quarter panel
paint

[special-K]

My`72 K2500 has a list.I divide the needs into groups of priority.

Group#1:
*Tie rod ends...last wear parts to replace.Still has play
*Lift kit...springs are settled bad and shocks are shot.I want higher
*Tires...worn to where they affect the steering.I want taller

Group#2:
*Seat...either fix foam and new cover or swap-out to saddle interior that I have
*Carpet
*Speedo cable...so I know how far I drive
*Fix fuel gauge...so I know how much fuel I`ve used

Group#3:
*Windshield...foggin`up
*Fix surface rust above rear window
*Window seals...all
*Replace rockers,fix dent in left door and right fender

That would get it right.I`d like to paint it,replace all the trim,rebuild the motor,swap to 4.10 axles,have radio modified into a 180w am/fm/cd/mp3/xm...

[Reno's71]

So my truck is all one color now.. Theres another off the list. Pics to come soon.

[msgross]

My list is so long that I don't even know where it ends!

1. powdercoat all brackets, rad support $
2. rebuild PS pump and box
3. finish driver side cab corner/rocker
4. start pass side cab corner/rocker
5. start vent area rebuild
6. weld leaf perches to rear axle
7. clean/install/paint driveshafts
8. install my new SS brake lines
9. install new rear brakes
10.finish front brakes
11. upholster buddy buckets $$
12. clean inside of doors and paint
13. buy wiring harness install $$$
14. pay body man to finish everything and paint $$$$
15. install body panels

17. install exhaust $$
18. buy rear and side glass $$
19. install gas tank and new lines
20. pay taxes and die

[Eturnit3]

some pics of the #2 process would be a priceless asset...

[msgross]

ask and ye shall receive...

http://www.fourwheeler.com/techartic...ild/index.html

don't have one for the ps pump, the kit was only $10 so I figured "why not" ya know...

[Eturnit3]

hell ya, and the pump looked like the easy part... the box was what I was worried about. Thanks again Big Mike, you are a legend here in the 4x4 dept.

[Reno's71]

So one more will be off the list. Right now, my truck is getting true dual -exhaust, with magnaflows, h-pipe, and side exit before the wheels. Cant wait.
That stock Y pipe is a horrible design BTW!

[msgross]

Originally Posted by Eturnit3

hell ya, and the pump looked like the easy part... the box was what I was worried about. Thanks again Big Mike, you are a legend here in the 4x4 dept.

I didn't write it so I don't know the difficulty yet, i've heard that those metal balls are tricky though...

[Eturnit3]

Well i crossed off, rebuild new front driveline and install, but added: fight for money back in botched lift kit order from 4wheelerssupply.com... shameless rant

[babyJay]

Burgundy 79...Not in this order...

Bushwacker cutout fender flares
TSL Boggers
Install seat belts (removed by PO)
Insurance
Registration (already titled)
De-Bling
Minor rust repair
Paint (Orange)
Bedliner by Line-X
Stereo and 6x9's (Brackets bought from Jeff)
Send center caps from re-chrome process.

Already replaced both bumpers and grille/headlight trim.

[ghettoluxury]

replace the rear u joints and the front axle shaft I broke last night while pulling agianst an 05 f450 powerstroke

[Bishops Trucks]

Between my son's baseball games and my softball, the weekend is busy.