Front spring stop adjustment - The 1947 - Present Chevrolet & GMC Truck Message Board Network

JimKshortstep4x4 · 06-06-2009, 06:29 PM

There is a a spring stop on the driver's side of my 4x4's and I would like to know where to set it. I believe that these did not originally come out on trucks but were added as a recall.

Attached is a picture of what I am calling a spring stop as it may go by another name.

TIA,

Jim

Chevy1TonFun · 06-06-2009, 11:43 PM

I hate those things. I don't have one on my truck, but I never had one on my truck. I'd say loose it.

**jaros44sr** · 06-07-2009, 12:45 AM

I could give you a demension if you need it, mine has the front and back ones

JimKshortstep4x4 · 06-07-2009, 05:12 AM

Thanks for the replies!

A dimension would be appreciated!

Jim

Blazer1970 · 06-07-2009, 06:33 AM

Since stock front springs are almost flat, the shackle moves very little during suspension flex. When the wheel travels up, the spring actually shortens. If you have changed to any kind of lift spring, you will likely have to move/eliminate that stop. You need to make sure that the shackle can not make contact with the stop under normal suspension flex.

JimKshortstep4x4 · 06-07-2009, 11:15 AM

Tim,

Thanks for the reply. The spring contacts the stop just at times like when going over a dip.

I have room to move them out for more clearance and will do that. I initially set up four of our 4x4's with 1/8"-3/16" clearance but they all contact the stop under some conditions.

Jim

**jaros44sr** · 06-07-2009, 12:02 PM

Quote:

Originally Posted by JimKshortstep4x4

Tim,

Thanks for the reply. The spring contacts the stop just at times like when going over a dip.

I have room to move them out for more clearance and will do that. I initially set up four of our 4x4's with 1/8"-3/16" clearance but they all contact the stop under some conditions.

Jim

Just measured mine, has a Rancho 4" lift. Seems like there is a 3/4" space between the back of leaf spring eye and the stop

The stop bracket is 1 5/16" off of the body mount bracket

JimKshortstep4x4 · 06-07-2009, 05:49 PM

jaros44sr,

Thanks for the measurement.

I will move the stops backwards for more clearance.

Jim

**jaros44sr** · 06-08-2009, 12:35 AM

Anytime, glad I could help out

06-06-2009, 06:29 PM	#1
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	Front spring stop adjustment There is a a spring stop on the driver's side of my 4x4's and I would like to know where to set it. I believe that these did not originally come out on trucks but were added as a recall. Attached is a picture of what I am calling a spring stop as it may go by another name. TIA, Jim __________________ 1971 Shortbox step side 4x4, 350 sbc, 3:07 rear end 1965 Impala SS 400 sbc, Muncie rock crusher 1966 Impala SS 396 bbc, TH 400 1969 El Camino, 350 sbc, TH 350 1971 Snowplow built on a Blazer frame 1972 GMC Short bed, stepside, TH 400, 427 BBC Last edited by JimKshortstep4x4; 07-14-2009 at 12:52 PM.

06-06-2009, 11:43 PM	#2
Chevy1TonFun Grease Monkey Join Date: Oct 2007 Location: Fresno CA Posts: 750	Re: Front spring stop adjustment I hate those things. I don't have one on my truck, but I never had one on my truck. I'd say loose it. __________________ Tow Rig: 2012 Chevy 2500HD CCSB LTZ Z71 4x4 Duramax Ultimate Offroad Build: 1978 Chevy Silverado K30 Crewcab Build Link http://67-72chevytrucks.com/vboard/s...d.php?t=654053 Mud Truck: 1972 Chevy Cheyenne K30 4x4, 468/400/205, D60/D70HD, 18" Custom Lift, 17x39" IROKs FOR SALE http://67-72chevytrucks.com/vboard/c...ton-4x4&cat=12

06-07-2009, 12:45 AM	#3
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,761	Re: Front spring stop adjustment I could give you a demension if you need it, mine has the front and back ones __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

06-07-2009, 05:12 AM	#4
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	Re: Front spring stop adjustment Thanks for the replies! A dimension would be appreciated! Jim __________________ 1971 Shortbox step side 4x4, 350 sbc, 3:07 rear end 1965 Impala SS 400 sbc, Muncie rock crusher 1966 Impala SS 396 bbc, TH 400 1969 El Camino, 350 sbc, TH 350 1971 Snowplow built on a Blazer frame 1972 GMC Short bed, stepside, TH 400, 427 BBC

06-07-2009, 06:33 AM	#5
Blazer1970 Registered User Join Date: Dec 1999 Location: Old Mission, MI, USA Posts: 2,507	Re: Front spring stop adjustment Since stock front springs are almost flat, the shackle moves very little during suspension flex. When the wheel travels up, the spring actually shortens. If you have changed to any kind of lift spring, you will likely have to move/eliminate that stop. You need to make sure that the shackle can not make contact with the stop under normal suspension flex. __________________ Tim

06-07-2009, 11:15 AM	#6
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	Re: Front spring stop adjustment Tim, Thanks for the reply. The spring contacts the stop just at times like when going over a dip. I have room to move them out for more clearance and will do that. I initially set up four of our 4x4's with 1/8"-3/16" clearance but they all contact the stop under some conditions. Jim __________________ 1971 Shortbox step side 4x4, 350 sbc, 3:07 rear end 1965 Impala SS 400 sbc, Muncie rock crusher 1966 Impala SS 396 bbc, TH 400 1969 El Camino, 350 sbc, TH 350 1971 Snowplow built on a Blazer frame 1972 GMC Short bed, stepside, TH 400, 427 BBC

06-07-2009, 05:49 PM	#8
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	Re: Front spring stop adjustment jaros44sr, Thanks for the measurement. I will move the stops backwards for more clearance. Jim __________________ 1971 Shortbox step side 4x4, 350 sbc, 3:07 rear end 1965 Impala SS 400 sbc, Muncie rock crusher 1966 Impala SS 396 bbc, TH 400 1969 El Camino, 350 sbc, TH 350 1971 Snowplow built on a Blazer frame 1972 GMC Short bed, stepside, TH 400, 427 BBC

06-08-2009, 12:35 AM	#9
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,761	Re: Front spring stop adjustment Anytime, glad I could help out __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.