Parting out a 1968 short stepper - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**michael bustamante** · 06-09-2009, 02:36 PM

My second attemp here. apparantly I did something wrong on the first posting
I have decided to part out one of my trucks. parts are all plus shipping.
The bed is in great shape. NO RUST!! this has lived its life as a New Mexico truck. the steps are good and solid, fenders are pretty good, not perfect but definatly good, bed sides are straight, tailgate is pretty good as well. There's a couple of broken spot welds in the upper corners but that is an easy fix. Theres a farmers bumper attatched and free and you want it. $400.00. Of course no shipping on this one but I can help with delivery aound the NM area for gas money.
the Cab has bad cab corners, rockers are rusted out but the floor is solid!! fire wall is good as well. cab comes with title. $150.00
Doors are ok not perfect but the skins are definatly workable. passenger is worse than the driver. 80.00 driver side 40.00 passenger. Inner door panals are the metal ones and in good shape. 20.00 each.
The rolling chasis is spoken for locally and the front clip is already gone. (Sorry Guys) But I do have a pretty decent 71-72 front clip. 200.00
Any other parts you guys are interested in just let me know on here before referring to the PM`s. I will post pics as requested and drop you a price.
This also has a 4 on the floor trans that shifted pretty darn good 13 years ago,(been parked that long) comes with clutch assy. (not the granny gear trans) 200.00.
Ill post more pics tomorrow

coast2coast · 06-09-2009, 09:19 PM

Condition and price for the dash bezel, rearview mirror, and steering column? Maybe some pics also? Thanks

**michael bustamante** · 06-10-2009, 08:57 AM

Coast to coast
dash bezel has a hole cut in the lower right corner for a guage but the guage is missing other guages good. Rearview mirror has the usual minor fading in the glass nothing bad and steering column is good and tight, turn signal and hazaerd are good.70.00 for all three

mahanian · 06-09-2009, 10:39 PM

Is the harness complete and in good condition? If so, a price please...

**michael bustamante** · 06-10-2009, 09:04 AM

Quote:

Originally Posted by mahanian

Is the harness complete and in good condition? If so, a price please...

which harness? Ill check out the dash harness this afternoon, the engine harness has been modified for a v8. non HEI. but its all there and works. I can do any soldering and sealing of the harness as necessary

**michael bustamante** · 06-13-2009, 02:24 PM

Quote:

Originally Posted by mahanian

Is the harness complete and in good condition? If so, a price please...

The dash harness looks pretty good and the fusebox as well. 50.00 Shipped

coast2coast · 06-10-2009, 02:22 PM

I'm going to pass on the bezel and the column. Can you get a picture of the mirror? Thanks

**michael bustamante** · 06-10-2009, 02:25 PM

Quote:

Originally Posted by coast2coast

I'm going to pass on the bezel and the column. Can you get a picture of the mirror? Thanks

sure thing Ill take a pic and post it for you in the morning

**michael bustamante** · 06-12-2009, 09:35 AM

Quote:

Originally Posted by coast2coast

I'm going to pass on the bezel and the column. Can you get a picture of the mirror? Thanks

here you are. I actually have two of them one without the plastic cover and one with I have a pic of the one with. 10.00 plus ship or 7.00 +ship for the one with out the cover

yellowGT · 06-12-2009, 12:36 PM

put me in line for the dash harness if mahanian doesnt take it.

coast2coast · 06-12-2009, 03:30 PM

Quote:

Originally Posted by michael bustamante

here you are. I actually have two of them one without the plastic cover and one with I have a pic of the one with. 10.00 plus ship or 7.00 +ship for the one with out the cover

The plastic cover where the arm mounts to the cab? Mine is still good, so I won't need that. Is one mirror any more clear than the other? My zip is 65608. Let me know a total and how you want paid. Thanks

**michael bustamante** · 06-12-2009, 03:46 PM

Quote:

Originally Posted by coast2coast

The plastic cover where the arm mounts to the cab? Mine is still good, so I won't need that. Is one mirror any more clear than the other? My zip is 65608. Let me know a total and how you want paid. Thanks

the clearer one is the one with out the plastic cover (covers the mounting area to the cab) lets figure 13.00 total

newbraunie · 06-12-2009, 05:32 PM

Condition and price on tailight housings. Want a set with no rust, mounting studs and pigtails intact.

coast2coast · 06-12-2009, 08:16 PM

Quote:

Originally Posted by michael bustamante

the clearer one is the one with out the plastic cover (covers the mounting area to the cab) lets figure 13.00 total

That sounds like the one that I need. Paypal?

**michael bustamante** · 06-12-2009, 12:37 PM

you got it Ill take pics of it tonight if theres any damage to it

69lemans · 06-12-2009, 01:10 PM

Are the back up lights in good shape? How much for them and the mounting brackets?

**michael bustamante** · 06-12-2009, 02:29 PM

Quote:

Originally Posted by 69lemans

Are the back up lights in good shape? How much for them and the mounting brackets?

the lenses are broken but the units themselves are in good shape. Not rusted.

69lemans · 06-14-2009, 02:46 PM

Quote:

Originally Posted by michael bustamante

the lenses are broken but the units themselves are in good shape. Not rusted.

How much for those b/u light assy's with brackets shipped to 29681? I just happen to have a NOS set of lenses. Thanks

**michael bustamante** · 06-15-2009, 11:08 AM

Quote:

Originally Posted by 69lemans

How much for those b/u light assy's with brackets shipped to 29681? I just happen to have a NOS set of lenses. Thanks

Ill let you have at em for 20.00 shipped

**rockc** · 06-18-2009, 08:06 AM

Do you have the angle iron that runs on the inside of the rear fender for the wire to the marker lights? need both sides, how much and shipped to 82210

culp7 · 06-12-2009, 05:53 PM

How much for left door?

**michael bustamante** · 06-12-2009, 06:01 PM

Quote:

Originally Posted by culp7

How much for left door?

do you need it stripped or with glass and regulators? the vent window is busted out

coast2coast · 06-13-2009, 03:06 PM

pm replied and paypal sent. Thanks

**wancosc356** · 06-14-2009, 02:24 AM

Weekend bump! TTT for a lot of good parts.

**michael bustamante** · 06-15-2009, 03:57 PM

New list of parts available
*floor shift boot and ring. Good condition 23.00 shipped
*washer resevoir with cap and holder 20.00 shipped
*cowl vent panal. striaght with no antenna hole. and one with antenna hole 50.00 each shipped
*speedo cable 20.00 shipped.
*driver side bumper bracket with 2 small uppers. 22.00 shipped
*parking brake handle 40.00 shipped
*1 barrel holly carb for parts. no bowl 15.00 shipped
*gas pedal non cst. 8.00 shipped or cst style 9.00 shipped
* 71-72 style upper fender trim. Both fenders. 1 has slight indent in it but it can easily be repaired. daily driver good condition with hardware. 40.00 shipped
* inline 6 motor mounts. these are for a 292, theres a t shape mount hole in the passenger side on one of the top holes, but I also have regular 6 cyl mounts as well. 28.00 shipped a set.
Lots of other parts!!!!!
just ask me!
Mike

06-09-2009, 02:36 PM	#1
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,862	Parting out a 1968 short stepper My second attemp here. apparantly I did something wrong on the first posting I have decided to part out one of my trucks. parts are all plus shipping. The bed is in great shape. NO RUST!! this has lived its life as a New Mexico truck. the steps are good and solid, fenders are pretty good, not perfect but definatly good, bed sides are straight, tailgate is pretty good as well. There's a couple of broken spot welds in the upper corners but that is an easy fix. Theres a farmers bumper attatched and free and you want it. $400.00. Of course no shipping on this one but I can help with delivery aound the NM area for gas money. the Cab has bad cab corners, rockers are rusted out but the floor is solid!! fire wall is good as well. cab comes with title. $150.00 Doors are ok not perfect but the skins are definatly workable. passenger is worse than the driver. 80.00 driver side 40.00 passenger. Inner door panals are the metal ones and in good shape. 20.00 each. The rolling chasis is spoken for locally and the front clip is already gone. (Sorry Guys) But I do have a pretty decent 71-72 front clip. 200.00 Any other parts you guys are interested in just let me know on here before referring to the PM`s. I will post pics as requested and drop you a price. This also has a 4 on the floor trans that shifted pretty darn good 13 years ago,(been parked that long) comes with clutch assy. (not the granny gear trans) 200.00. Ill post more pics tomorrow Attached Images __________________ 1967custom

06-09-2009, 09:19 PM	#2
coast2coast Registered User Join Date: Oct 2006 Location: Strafford Missouri Posts: 217	Re: Parting out a 1968 short stepper Condition and price for the dash bezel, rearview mirror, and steering column? Maybe some pics also? Thanks

06-10-2009, 08:57 AM	#3
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,862	Re: Parting out a 1968 short stepper Coast to coast dash bezel has a hole cut in the lower right corner for a guage but the guage is missing other guages good. Rearview mirror has the usual minor fading in the glass nothing bad and steering column is good and tight, turn signal and hazaerd are good.70.00 for all three __________________ 1967custom Last edited by michael bustamante; 06-10-2009 at 08:58 AM.

06-09-2009, 10:39 PM	#4
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Re: Parting out a 1968 short stepper Is the harness complete and in good condition? If so, a price please...

06-10-2009, 02:22 PM	#7
coast2coast Registered User Join Date: Oct 2006 Location: Strafford Missouri Posts: 217	Re: Parting out a 1968 short stepper I'm going to pass on the bezel and the column. Can you get a picture of the mirror? Thanks

06-12-2009, 12:36 PM	#10
yellowGT Registered User Join Date: Jan 2006 Location: Garland, TX Posts: 970	Re: Parting out a 1968 short stepper put me in line for the dash harness if mahanian doesnt take it. __________________ '84 swb chevy '69 swb chevy '68 swb chevy '95 Impala ss-sold '89 chevy crew cab dually 3+3

06-12-2009, 05:32 PM	#13
newbraunie Registered User Join Date: Aug 2008 Location: Central TX Posts: 393	Re: Parting out a 1968 short stepper Condition and price on tailight housings. Want a set with no rust, mounting studs and pigtails intact.

06-12-2009, 12:37 PM	#15
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,862	Re: Parting out a 1968 short stepper you got it Ill take pics of it tonight if theres any damage to it __________________ 1967custom

06-12-2009, 01:10 PM	#16
69lemans Registered User Join Date: Aug 2008 Location: simpsonville,sc Posts: 417	Re: Parting out a 1968 short stepper Are the back up lights in good shape? How much for them and the mounting brackets?

06-18-2009, 08:06 AM	#20
rockc Registered User Join Date: Jul 2007 Location: SE WY Posts: 640	Re: Parting out a 1968 short stepper Do you have the angle iron that runs on the inside of the rear fender for the wire to the marker lights? need both sides, how much and shipped to 82210 __________________ 72 chevy 3/4 ton 4X4

06-12-2009, 05:53 PM	#21
culp7 HickTown Join Date: Apr 2009 Location: ANDOVER, Kansas Posts: 355	Re: Parting out a 1968 short stepper How much for left door? __________________ 1993 Ford Mustang Vert w/ 2.3 1969 Chevy C/10 w/350 1968 Chevy C-20 w/250 1976 Dodge Aspen W/ 225 2000 Toyota Tundra w/4.7 1987 Dodge Ram D-100 w/360 255/70-15 ___________ (oo)══╬══(oo) ‾‾‾‾‾‾‾‾‾‾‾

06-13-2009, 03:06 PM	#23
coast2coast Registered User Join Date: Oct 2006 Location: Strafford Missouri Posts: 217	Re: Parting out a 1968 short stepper pm replied and paypal sent. Thanks

06-14-2009, 02:24 AM	#24
wancosc356 I Like Mine With No Shine! Join Date: Apr 2009 Location: SC Posts: 2,705	Re: Parting out a 1968 short stepper Weekend bump! TTT for a lot of good parts. __________________ Michael 1967 Chevrolet C10 Short Fleet (Literal Ground Up....One Day) 2006 GMC Sierra Crew Cab 4x4 1969 Lincoln Continental Coupe Project FOR SALE http://67-72chevytrucks.com/vboard/c...ct=4578&cat=17 1981 Honda CM400 C Bobber SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=384152

06-15-2009, 03:57 PM	#25
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,862	Re: Parting out a 1968 short stepper New list of parts available floor shift boot and ring. Good condition 23.00 shipped washer resevoir with cap and holder 20.00 shipped cowl vent panal. striaght with no antenna hole. and one with antenna hole 50.00 each shipped speedo cable 20.00 shipped. driver side bumper bracket with 2 small uppers. 22.00 shipped parking brake handle 40.00 shipped 1 barrel holly carb for parts. no bowl 15.00 shipped gas pedal non cst. 8.00 shipped or cst style 9.00 shipped * 71-72 style upper fender trim. Both fenders. 1 has slight indent in it but it can easily be repaired. daily driver good condition with hardware. 40.00 shipped * inline 6 motor mounts. these are for a 292, theres a t shape mount hole in the passenger side on one of the top holes, but I also have regular 6 cyl mounts as well. 28.00 shipped a set. Lots of other parts!!!!! just ask me! Mike Attached Images __________________ 1967custom Last edited by michael bustamante; 06-15-2009 at 04:00 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.