Tilt Steering conversion - The 1947 - Present Chevrolet & GMC Truck Message Board Network

J-Spec C10 · 01-02-2003, 08:40 PM

Has anyone converted to tilt steering, is it a big job? I have a friend who added a tilt column from a Chevy Minivan but I haven't asked him if it was a bolt-in fit or not. Also, the wiper controls and gear selector would be different wouldn't they?

Jason Spears · 01-02-2003, 10:39 PM

I put a tilt column in my '87 4x4. It was a super easy job. Just unbolt it and pull it out. The hardest part was trying to locate the unit. The one I put in my truck had a delay wiper switch where the original didn't have delay. I haven't located a delay module yet to see if I can get them working.

I wouldn't recommend trying to make a column from another vehicle fit.

Hooter · 01-02-2003, 10:44 PM

I put a tilt in my 74 out of a 1977 GMC. Wasn't too big of an ordeal, the only big part was pulling the steering wheel in order to put the correct lock cylinder into place

79BIG10 · 01-03-2003, 01:58 PM

A van may not fit. I was looking at getting a van column but found out that they don't interchange from a mechanic. When I got my new one it was a easy job but take your time. Also get ready for some tight fits. If you need a write up I can do one for you just let me know.

onetoncrewcab · 01-03-2003, 07:35 PM

It's been a few years since I put mine in, but I think I got it out of a full size mid 70s Chevy Caprice. I think I had to change the wiring harness through the column because of the wiring block at the end of the column. Otherwise it was a direct bolt in. Let me know if I might be spewing something here. It has been awhile since I did this.
MJ

01-02-2003, 08:40 PM	#1
J-Spec C10 Whats this wire for?.... Join Date: Dec 2002 Location: Barrie, Ontario, CANADA Posts: 378	Tilt Steering conversion Has anyone converted to tilt steering, is it a big job? I have a friend who added a tilt column from a Chevy Minivan but I haven't asked him if it was a bolt-in fit or not. Also, the wiper controls and gear selector would be different wouldn't they? __________________ Kyle CANADIAN CONNECTION '82 C10 Resto-Custom--> * 2 1/4" manifold back dual exhaust with Hooker Aerochambers & High Flow Cats Taylor Ignition Wires Centerline 15" Telstars with 32"x10" mudders

01-02-2003, 10:44 PM	#3
Hooter My other Love Join Date: Aug 2001 Location: Castlegar B.C. Canada Posts: 4,085	I put a tilt in my 74 out of a 1977 GMC. Wasn't too big of an ordeal, the only big part was pulling the steering wheel in order to put the correct lock cylinder into place __________________ Castlegar B.C.The great white North (Canada Eh!) Hooter_5@hotmail.com First generation Monte Carlo club pictures of my life

01-03-2003, 01:58 PM	#4
79BIG10 I'm back with 2nd truck! Join Date: Feb 2002 Location: Texas Posts: 3,774	A van may not fit. I was looking at getting a van column but found out that they don't interchange from a mechanic. When I got my new one it was a easy job but take your time. Also get ready for some tight fits. If you need a write up I can do one for you just let me know. __________________ 1979 Chevrolet Bonanza Big10 "Tootsie Roll" 1985 Chevrolet Silverado (wife's) Member of the Southern Bowties Club "Don't underestimate how sexy a fat man who drinks to excess can be." Homer Simpson

01-03-2003, 07:35 PM	#5
onetoncrewcab One of my kids. Cute eh? Join Date: Oct 2001 Location: Mitchell, SD Posts: 1,286	It's been a few years since I put mine in, but I think I got it out of a full size mid 70s Chevy Caprice. I think I had to change the wiring harness through the column because of the wiring block at the end of the column. Otherwise it was a direct bolt in. Let me know if I might be spewing something here. It has been awhile since I did this. MJ __________________ If a kid asks where rain comes from, I think a cute thing to tell him is “God is crying.” And if he asks why God is crying, another cute thing to tell him is “Probably because of something you did. John 3:16 2006 Chevy HHR 2000 Dodge Durango 1985 Jeep CJ-7 1970 Chevy Pickup

01-02-2003, 10:39 PM	#2
Jason Spears Registered User Join Date: Dec 2002 Location: Stoney Creek, ON Posts: 89	I put a tilt column in my '87 4x4. It was a super easy job. Just unbolt it and pull it out. The hardest part was trying to locate the unit. The one I put in my truck had a delay wiper switch where the original didn't have delay. I haven't located a delay module yet to see if I can get them working. I wouldn't recommend trying to make a column from another vehicle fit.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.