windshield wiper blades - The 1947 - Present Chevrolet & GMC Truck Message Board Network

pokethesmot · 07-07-2009, 01:20 AM

ok ive never bought windshield wiper blades before...but i saw a huge box of them at the "gettin place" that were brand new but a buck each so i was thinking i should pick a pair up for my truck but while looking a t them i noticed they didnt say what make they were for just what size there where..so what size would my blades be?

79gmcc15 · 07-07-2009, 01:33 AM

well it should be 16 inch. but I always wondered if you can go bigger??

pokethesmot · 07-07-2009, 01:57 AM

i think that they had a thickness rating too but i could be wrong

**N2TRUX** · 07-07-2009, 09:21 PM

Pull one of your and go match them up. Just because they are the same length don't mean they are exactly the same.

JohnC · 07-08-2009, 08:49 AM

Most wiper blade have a narrow and a wide version to them. I think stock they were narrow, but they can be swapped either way if someone has changed the whole wiper not just the blade. Like Ken said just take yours off and compare. That is the easiest way. That way if yours has been changed to a different one somtime in the past you will get the correct one for what you need.

As far as going longer, usually you can go a size longer. The newer windshields aren't as easy to do with their curvature. The older ones are more flat, and let the longer ones work better. Easiest way would be to turn the wipers on and stop them when they are straight up. This is usually where it is a factor. You don't want to go too long, and start hitting the top of the windshield gasket. The longer ones don't really help all that much to the driver, but it is possible to do it.

babyJay · 07-08-2009, 11:28 PM

I agree with Ken, this is the way I have replaced blades on everything I ever owned. Also worked in the quick lube industry for years and we did it there too (for a pretty penny

).

piecesparts · 07-09-2009, 10:52 AM

I run 18" blades on my truck. It is just about the limit on length, though.

07-07-2009, 01:20 AM	#1
pokethesmot profeshinaly unimployed Join Date: Dec 2008 Location: hazlehurst, GA Posts: 1,232	windshield wiper blades ok ive never bought windshield wiper blades before...but i saw a huge box of them at the "gettin place" that were brand new but a buck each so i was thinking i should pick a pair up for my truck but while looking a t them i noticed they didnt say what make they were for just what size there where..so what size would my blades be? __________________ my ride click here my myspace "having mud flaps is like asking for a smaller trophy"

07-07-2009, 01:33 AM	#2
79gmcc15 Gettin It One Pice At A Time Join Date: Oct 2004 Location: everett, washington Posts: 2,688	Re: windshield wiper blades well it should be 16 inch. but I always wondered if you can go bigger?? __________________ RIP ELJAY Work In Progress 1979 GMC C1500 Trailering Special. Getting the truck done, one piece at a time. “You can tell a lot about a fellow’s character by his way of eating jellybeans.”Ronald Reagan “I don’t know the key to success but I know the key to failure is trying to please everybody.” Bill Cosby

07-07-2009, 01:57 AM	#3
pokethesmot profeshinaly unimployed Join Date: Dec 2008 Location: hazlehurst, GA Posts: 1,232	Re: windshield wiper blades i think that they had a thickness rating too but i could be wrong __________________ my ride click here my myspace "having mud flaps is like asking for a smaller trophy"

07-07-2009, 09:21 PM	#4
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,023	Re: windshield wiper blades Pull one of your and go match them up. Just because they are the same length don't mean they are exactly the same. __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

07-08-2009, 08:49 AM	#5
JohnC Registered User Join Date: Feb 2009 Location: Oklahoma Posts: 7,461	Re: windshield wiper blades Most wiper blade have a narrow and a wide version to them. I think stock they were narrow, but they can be swapped either way if someone has changed the whole wiper not just the blade. Like Ken said just take yours off and compare. That is the easiest way. That way if yours has been changed to a different one somtime in the past you will get the correct one for what you need. As far as going longer, usually you can go a size longer. The newer windshields aren't as easy to do with their curvature. The older ones are more flat, and let the longer ones work better. Easiest way would be to turn the wipers on and stop them when they are straight up. This is usually where it is a factor. You don't want to go too long, and start hitting the top of the windshield gasket. The longer ones don't really help all that much to the driver, but it is possible to do it.

07-08-2009, 11:28 PM	#6
babyJay Arrived on a Pale Horse Join Date: Mar 2007 Location: SnagTown Indiana Posts: 2,524	Re: windshield wiper blades I agree with Ken, this is the way I have replaced blades on everything I ever owned. Also worked in the quick lube industry for years and we did it there too (for a pretty penny). __________________ Jason 87 V30 350TBI/400 White w/Boss V-plow 89 R3500 CC SRW

07-09-2009, 10:52 AM	#7
piecesparts Parts and more parts Join Date: Nov 2003 Location: Lebo, Kansas (middle of nowhere Posts: 6,821	Re: windshield wiper blades I run 18" blades on my truck. It is just about the limit on length, though.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.