Been Messin`With A Stripper - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**special-K** · 07-19-2009, 12:11 PM

I started messing with a stripper today.At first I just thought I`d check it out.One thing led to another and before I knew it,it was just me and that stripper up on the top of my little truck.It all started with a little stroking.It didn`t take long before I was really pouring it on and stroking that stripper all over the top of that truck.I gotta admit,it`s been a while and I guess I forgot it can get a bit messy.But,it was nothing I couldn`t handle with my hose.
I didn`t get any pictures until I was through with that stripper...sorry.Here`s a picture of the truck before all this happened:

I`ll get some after shots if you want.

**special-K** · 07-19-2009, 12:24 PM

Here ya go:

I need to run out and get more stripper now.Then start sanding with 80,coat with rust inhibitor,and shoot some red oxide on.The original white paint had gotten thin and surface rust started to form.I wish I had the money for soda-blasting.So far it hasn`t cost me a dime since I had the stripper and supplies already.I`m going to be going into the M22 so I can get it and the 327 installed.I`m just storing a 350/TH350 in it`s place for now.I`m anxious to fire that thing up and get the front sheet metal over it.With any luck,I`ll get a driveshaft and exhaust made this summer.I still need to put a ring & pinion in,too.

Little by little.This isn`t called "Project Poorboy" for nothing.

Longhorn Man · 07-19-2009, 12:31 PM

lol.... i like the play on words... great minds think alike!

**special-K** · 07-19-2009, 12:35 PM

What?I have no idea what you`re talking about.lol

sameyrasmea72 · 07-19-2009, 12:44 PM

NICE!!!!!! Makes me want to go out and get me a stripper.

Field and Son · 07-19-2009, 01:19 PM

If you havent paid for stripper in a while you will be surprised at the cost. It has gone way up in price. But then again so have strippers.

sameyrasmea72 · 07-19-2009, 01:29 PM

Yeah, I was going to ask that. What is the rate for a high performance stripper these days?

68,69 K20 · 07-19-2009, 12:42 PM

Nice start...That cab looks real solid, I'm jealous

Longhorn Man · 07-19-2009, 07:45 PM

just don't get one that is too agressive, but, then again, you want one that takes it all off the first time.
The agressive ones may work too fast and you don't get enough time to react, and it could cause damage.
And you need to read the fine print. I prefer the strippers that stop when you hit them with a hose.
And always.... ALWAYS, wear the correct rubber protective equipment.

bad6772 · 07-19-2009, 07:46 PM

LHM you are so gay....LOL

Longhorn Man · 07-19-2009, 07:55 PM

not as gay as you

jsmithbm · 07-19-2009, 08:05 PM

Whats the best kind of stripper to get if its your first time?

**special-K** · 07-19-2009, 09:08 PM

Aw man,I forgot to wear protection and I got a burning sensation.Now I know what guys meant when they said,"Don`t get any on ya."

The stripper I got today really blew my mind.It took a whole lot of dollar bills to take this one home...26+.I had no choice but to grab a stripper locally.The choice stuff is in the big city.Ace set me up with a stripper named Jasco.We`re talkin`professional grade here.I don`t cheap out when it comes to strippers.Jasco was clad in gold.If you go to Ace and check out the strippers you`ll know Jasco by the gold.
I better say no more.This is a decent site,afte rall.

Longhorn Man · 07-19-2009, 10:51 PM

this is awesome!

Arad68 · 07-19-2009, 10:59 PM

Damn...I need a stripper!

vectorit · 07-19-2009, 11:24 PM

Yea I used a stripper once. I was short on funds, and all on my own. So I thought what the heck, and thought what would it hurt? I ended up getting burned a bit, mainly because I got excited and threw caution to the wind and didn't wear proper protection. Sure the things came un done, and there was a lot of hosing down afterwards. But I walked away a little burned, and the landlord wasn't happy about the mess.

My mistake was I didn't follow up with my stripper experience quick enough, and I had to deal with the strippers wrath of corrosive behaviors. Long story but things worked out.

Good luck with your stripper, since mine left something like glitter on me which caused issues at home.

unclewatts · 07-19-2009, 11:15 PM

Best stripper I ever saw was "Aircraft Remover". We used it in the body shop and it beat the pants offa Jasco. A bit more expensive though. As I recall it only came in gallon cans.

Longhorn Man · 07-19-2009, 11:35 PM

you want to use strippers outdoors, or in a detached garagee... sometimes they smell funny.

sameyrasmea72 · 07-20-2009, 12:36 AM

Quote:

Originally Posted by Longhorn Man

... sometimes they smell funny.

lmao. I need to find these strippers ya'll are talking about. The last stripper I used was a cheap one and I only got it half way off ( I think I better insert the words the paint here) and I did not use the hose quick enough and it dried to a real mess.

BarryB · 07-21-2009, 11:07 AM

Quote:

Originally Posted by Longhorn Man

you want to use strippers outdoors, or in a detached garagee... sometimes they smell funny.

Yeah you definately don't want to bring said stripper into the house, unless you live by yourself and can stand the smell of the stripper. LOL

This has got to be the funniest thread I've read in a while. Thanks, Tim for starting it.

Skirkpat · 07-21-2009, 11:17 AM

I have used aircraft stripper, the best on the market is the same one they use on Hooters Air's Airplanes

Skirkpat · 07-21-2009, 11:21 AM

Quote:

Originally Posted by Longhorn Man

you want to use strippers outdoors, or in a detached garagee... sometimes they smell funny.

This is great advice, if you do use a stripper in the house, your girl will know. They can sniff it out like a bloodhound. And when they confront you it is best to admit it and suffer the consequences (my girl won't let me near her after I use strippers)...Lie and all h#!! will break loose.

storm9c1 · 07-21-2009, 12:20 PM

I don't know about you guys. I mean, strippers are just too complicated. And some are too dangerous. Good ones are hard to find. And many are too expensive. I'd rather just let my hand do all the work.

sick69 · 07-20-2009, 12:32 AM

A thick residue is left sometimes,,,,takes alot of washing or the car wash pressure hose to remove it.

What ever you do make sure it doesn't get into the house the wife always gets mad about the residue and smell.

Frank

**special-K** · 07-20-2009, 05:35 AM

I went three times around with this stripper.About 15 minutes each time.Actually,I went a couple more times to get into every crack.It seems to take more effort to get it off vertically.Takes alot less when the stripper can just lay there.I know there are better strippers on the internet and out of town.Jasco was the best I could do in a pinch on Sunday.We`re definately talking professional grade.Let`s just say the job got done and it was not far from as good as it gets.My needs were very well taken care of and I`m satisfied now.Look at it this way,when`s the last time you spent $26 and walked away a happy man?

07-19-2009, 12:11 PM	#1
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,861	Been Messin`With A Stripper I started messing with a stripper today.At first I just thought I`d check it out.One thing led to another and before I knew it,it was just me and that stripper up on the top of my little truck.It all started with a little stroking.It didn`t take long before I was really pouring it on and stroking that stripper all over the top of that truck.I gotta admit,it`s been a while and I guess I forgot it can get a bit messy.But,it was nothing I couldn`t handle with my hose. I didn`t get any pictures until I was through with that stripper...sorry.Here`s a picture of the truck before all this happened: I`ll get some after shots if you want. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ Last edited by special-K; 02-21-2016 at 06:11 PM.

07-19-2009, 12:24 PM	#2
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,861	Re: Been Messin`With A Stripper Here ya go: I need to run out and get more stripper now.Then start sanding with 80,coat with rust inhibitor,and shoot some red oxide on.The original white paint had gotten thin and surface rust started to form.I wish I had the money for soda-blasting.So far it hasn`t cost me a dime since I had the stripper and supplies already.I`m going to be going into the M22 so I can get it and the 327 installed.I`m just storing a 350/TH350 in it`s place for now.I`m anxious to fire that thing up and get the front sheet metal over it.With any luck,I`ll get a driveshaft and exhaust made this summer.I still need to put a ring & pinion in,too. Little by little.This isn`t called "Project Poorboy" for nothing. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

07-19-2009, 12:31 PM	#3
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: Been Messin`With A Stripper lol.... i like the play on words... great minds think alike!

07-19-2009, 12:35 PM	#4
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,861	Re: Been Messin`With A Stripper What?I have no idea what you`re talking about.lol __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

07-19-2009, 12:44 PM	#5
sameyrasmea72 Senior Member Join Date: Aug 2003 Location: Lubbock, Texas Posts: 2,443	Re: Been Messin`With A Stripper NICE!!!!!! Makes me want to go out and get me a stripper. __________________ 72 Cheyenne Super 80 Silverado Blazer 2wd

07-19-2009, 01:19 PM	#6
Field and Son Registered User Join Date: Nov 2008 Location: Fond du Lac, Wisconsin Posts: 425	Re: Been Messin`With A Stripper If you havent paid for stripper in a while you will be surprised at the cost. It has gone way up in price. But then again so have strippers.

07-19-2009, 01:29 PM	#7
sameyrasmea72 Senior Member Join Date: Aug 2003 Location: Lubbock, Texas Posts: 2,443	Re: Been Messin`With A Stripper Yeah, I was going to ask that. What is the rate for a high performance stripper these days? __________________ 72 Cheyenne Super 80 Silverado Blazer 2wd

07-19-2009, 12:42 PM	#8
68,69 K20 They call me the Breeze... Join Date: Jul 2007 Location: New York Posts: 2,251	Re: Been Messin`With A Stripper Nice start...That cab looks real solid, I'm jealous __________________ Mike 69 K20 "Beer is proof God loves us and wants us to be happy"....Ben Franklin

07-19-2009, 07:45 PM	#9
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: Been Messin`With A Stripper just don't get one that is too agressive, but, then again, you want one that takes it all off the first time. The agressive ones may work too fast and you don't get enough time to react, and it could cause damage. And you need to read the fine print. I prefer the strippers that stop when you hit them with a hose. And always.... ALWAYS, wear the correct rubber protective equipment.

07-19-2009, 07:46 PM	#10
bad6772 Official Site Guitar Shredder Join Date: May 2006 Location: Oz Posts: 3,955	Re: Been Messin`With A Stripper LHM you are so gay....LOL

07-19-2009, 07:55 PM	#11
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: Been Messin`With A Stripper not as gay as you

07-19-2009, 08:05 PM	#12
jsmithbm Registered User Join Date: Jun 2009 Location: Newnan, GA Posts: 485	Re: Been Messin`With A Stripper Whats the best kind of stripper to get if its your first time? __________________ Learning as I go! -------------------------------------

07-19-2009, 09:08 PM	#13
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,861	Re: Been Messin`With A Stripper Aw man,I forgot to wear protection and I got a burning sensation.Now I know what guys meant when they said,"Don`t get any on ya." The stripper I got today really blew my mind.It took a whole lot of dollar bills to take this one home...26+.I had no choice but to grab a stripper locally.The choice stuff is in the big city.Ace set me up with a stripper named Jasco.We`re talkin`professional grade here.I don`t cheap out when it comes to strippers.Jasco was clad in gold.If you go to Ace and check out the strippers you`ll know Jasco by the gold. I better say no more.This is a decent site,afte rall. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ Last edited by special-K; 02-21-2016 at 06:15 PM. Reason: I didn't used to spell so good

07-19-2009, 10:51 PM	#14
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: Been Messin`With A Stripper this is awesome!

07-19-2009, 10:59 PM	#15
Arad68 Trucks N Tranzams Join Date: Dec 2002 Location: North Las Vegas, Nevada Posts: 816	Re: Been Messin`With A Stripper Damn...I need a stripper! __________________ Don '68 Chevy LB 383 TH400/GV/373 posi '56 Chevy 4WD SWB '64 Chevy short stepside '79 Trans Am 455/TH2004R/12blt/4whldisc 95 Kia (Wifes car) 2002 S-10 extended cab pickup "God punishes small sins immediately"



Register or Log In To remove these advertisements.

07-19-2009, 11:24 PM	#16
vectorit What? Join Date: Jun 2007 Location: Southern California Posts: 7,617	Re: Been Messin`With A Stripper Yea I used a stripper once. I was short on funds, and all on my own. So I thought what the heck, and thought what would it hurt? I ended up getting burned a bit, mainly because I got excited and threw caution to the wind and didn't wear proper protection. Sure the things came un done, and there was a lot of hosing down afterwards. But I walked away a little burned, and the landlord wasn't happy about the mess. My mistake was I didn't follow up with my stripper experience quick enough, and I had to deal with the strippers wrath of corrosive behaviors. Long story but things worked out. Good luck with your stripper, since mine left something like glitter on me which caused issues at home. __________________ Chris 1968 K20 Suburban 1972 K10 LWB PU

07-19-2009, 11:15 PM	#17
unclewatts 70 Chevrolet=Obsession Join Date: Jun 2009 Location: nice ca Posts: 1,067	Re: Been Messin`With A Stripper Best stripper I ever saw was "Aircraft Remover". We used it in the body shop and it beat the pants offa Jasco. A bit more expensive though. As I recall it only came in gallon cans. __________________ I'm Just like my truck. Old, Ugly and Grouchy. Except my truck starts easily in the morning and doesn't smoke! IT'S NOT EASY BEING GREEN! -Kermit the frog 1970 Chevrolet C-10 Longbed Stepside : 350, Muncie M20, 3.08 GM corp. positraction Forest green exterior/light green interior(Where all my money goes) 1996 Toyota Corolla (Parts runner)

07-19-2009, 11:35 PM	#18
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: Been Messin`With A Stripper you want to use strippers outdoors, or in a detached garagee... sometimes they smell funny. Last edited by Longhorn Man; 07-20-2009 at 03:56 PM.

07-21-2009, 11:17 AM	#21
Skirkpat Registered User Join Date: Dec 2008 Location: K.C. Missouri Posts: 1,024	Re: Been Messin`With A Stripper I have used aircraft stripper, the best on the market is the same one they use on Hooters Air's Airplanes __________________ 1969 Short Stepside 1969 4 WD Suburban 1970 1 Ton Dually....Misfit oh, and a 2001 HD 2500, 8.1 Allison Shortbed 4 Door

07-21-2009, 12:20 PM	#23
storm9c1 * That's interesting * Join Date: Oct 2008 Location: Pittsburgh, PA Posts: 2,772	Re: Been Messin`With A Stripper I don't know about you guys. I mean, strippers are just too complicated. And some are too dangerous. Good ones are hard to find. And many are too expensive. I'd rather just let my hand do all the work. __________________ Tom Chevy by day... 1969 Chevy C30 Rollback Tow Truck -- 383 stroker, 4L80E 2011 Chevy Caprice PPV 9C3 6.0L 1995 Chevy Caprice 9C1 1994 Chevy Caprice 9C1 #3 1995 Chevy Caprice Wagon #2 1995 Chevy Impala SS Mopar by night... 1969 Dodge Charger 1972 Chrysler Newport 2dr Hardtop (27K miles) Plus others... Last edited by storm9c1; 07-21-2009 at 12:22 PM.

07-20-2009, 12:32 AM	#24
sick69 Registered User Join Date: Sep 2006 Location: colorado springs colorado Posts: 737	Re: Been Messin`With A Stripper A thick residue is left sometimes,,,,takes alot of washing or the car wash pressure hose to remove it. What ever you do make sure it doesn't get into the house the wife always gets mad about the residue and smell. Frank __________________ 70 chevy lwb c10 454/th400 and a 9" rearend suicide doors, marker light fuel fill, 4" cowl , mini tub

07-20-2009, 05:35 AM	#25
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,861	Re: Been Messin`With A Stripper I went three times around with this stripper.About 15 minutes each time.Actually,I went a couple more times to get into every crack.It seems to take more effort to get it off vertically.Takes alot less when the stripper can just lay there.I know there are better strippers on the internet and out of town.Jasco was the best I could do in a pinch on Sunday.We`re definately talking professional grade.Let`s just say the job got done and it was not far from as good as it gets.My needs were very well taken care of and I`m satisfied now.Look at it this way,when`s the last time you spent $26 and walked away a happy man? __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ Last edited by special-K; 07-20-2009 at 06:55 AM.

Register or Log In To remove these advertisements.