Parting out the organ donor - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Bam Bam 56 · 07-20-2009, 10:15 AM

I tried this a couple months ago, but found it very hard to do before i actially started to take the truck apart. Here is my list of updated prices. Make me and offer and it will probably leave my garage!

I have parts for a 72 C10 Chevy pickup that i am selling. Most of these will fit a 67-72 Chevy truck.

Cab is sold all ready with every thing in it except the column and the gauge panel

Radiator - $40
Box front panel - $20
Cowl panel - $20
Upper control arms - $30 each
Lower control Arms - $40 each
Rear differential - $150
Brake booster / Master cylinder - $30
Spindles - $30 each
Brake calipers - $30 each
Front springs - $20 / pair
Bell housing for 4 speed transmission - $75
Under dash harness w/ fuse block - $100
Alternator and headlight harness - $75
Edelbrock 600 cfm carb with electric choke - $200 obo

If there is any thing else you might be looking for let me know. Items I know I am keeping are:
Box sides
tailgate
hood
fenders
front and rear bumpers
drivers door
front and rear wheel wells/ tubs

TomsCheyenne · 07-21-2009, 09:31 AM

I need the front inner fenders for my '71, are those for sale, and what is the shape/price? Thank you.

Bam Bam 56 · 07-21-2009, 09:46 AM

Sorry, i forgot to include those on my list that i am keeping. I have updated my list

kacz81 · 07-21-2009, 01:48 PM

I need both headlight bezels and drivers headlight bucket for my 72 do you have those for sale

Bam Bam 56 · 07-21-2009, 02:34 PM

the headlight buckets and bezels were junk so i tossed them, sorry. looked like some one tried to do a custom job on them

spatz · 07-28-2009, 09:35 PM

Hey Bam Bam 56, is the rear axle a 5 x 5 wheel pattern for the coil spring rear? also on the bed floor, does it still have the crossmembers on it. On the frame how is the shape of the main engine/suspension crossmember let me know and we can work up some type of deal thanks

Cyclone44 · 07-28-2009, 11:26 PM

Gauge Panel - $120, I would like a picture of this please.....

CSGAS · 07-29-2009, 12:24 AM

That's a standard V8 radiator? 28 7/8" between the tanks? I'll take it if it is, and has no leaks...let me know what the shipping will be to 28027 for ya...thanx!

Bam Bam 56 · 07-29-2009, 02:11 PM

Spatz, the rear is for a leaf spring rear and has the 5x4.75 pattern measured from the outside of 1 lug, to the inside if the lug across from it. for the bed floor i have the cross sills but need them for my truck. As far as the engine cross member, it is in really good shape just needs to be cleaned up, however, i would hate to split that from the rest of the frame since that would make what remains almost worthless. I would be willing to split it but im not sure what the price would be. It would have to be worth junking the frame basicly. Unless others need other crossmembers or mounts from it.

Bam Bam 56 · 07-29-2009, 02:12 PM

Cyclone, i will get pictures of the gauge panel for you

Bam Bam 56 · 07-29-2009, 02:13 PM

CSGAS, it is the standard radiator. I will confirm the measurements for you and weigh it for shipping

justin26 · 07-29-2009, 02:34 PM

how are the hood hinges shipping to 71901

Bam Bam 56 · 07-29-2009, 02:59 PM

Justin, estimating the shipping weight at 20 lbs since i dont have them in front of me it looks like it would be $57

Bam Bam 56 · 07-29-2009, 03:00 PM

Justin, forgot to answer your question. the hinges are in good condition just need to be cleaned up

**michael bustamante** · 07-29-2009, 03:23 PM

how far are you from Milwaukee? are you willing to part the axle assy? Im interested in the shafts

Bam Bam 56 · 07-29-2009, 03:31 PM

Im about 2 hours from Milwaukee, If spatz decides he doesnt want the rear end I will sell the axles separate if you'd like, i would have to get a price

oldschooler · 07-29-2009, 03:42 PM

I would like the disc brake shields, If you dont mind taking them off the spindles. Shipped to 17362. Thanks, Rich

spatz · 07-29-2009, 05:11 PM

Hey chris, Ill pass on the axle and the bed floor but im interested in the frame, was it an auto or manual and could use the frame from about three to four foot back, Ill have to figure a way of hauling it, and I wouldn't be able to get your way until Oct or Nov.

Bam Bam 56 · 07-29-2009, 05:25 PM

Here is a picture of the dash, best we could do with the wheel still in the way

http://i930.photobucket.com/albums/a...g?t=1248904757

Bam Bam 56 · 07-29-2009, 05:39 PM

Oldschooler, $50 shipped, i would be able to remove them on Friday

oldschooler · 07-29-2009, 07:08 PM

Quote:

Originally Posted by Bam Bam 56

Oldschooler, $50 shipped, i would be able to remove them on Friday

I have a line on another set, for 40 shipped. I will let you know by tomorrow if I am interested or not. Thanks, Rich

**michael bustamante** · 07-29-2009, 06:00 PM

ok let me see if my plans to go to milwaukee stay in effect for next monthand if you still have them. Ill cantact you again

crimespree · 07-29-2009, 06:48 PM

care to ship that power steering pump to alabama?

Bam Bam 56 · 07-29-2009, 07:06 PM

whats the zip?

crimespree · 07-29-2009, 08:54 PM

Quote:

Originally Posted by bam bam 56

whats the zip?

36301

07-20-2009, 10:15 AM	#1
Bam Bam 56 Registered User Join Date: Jun 2007 Location: Little Chute, WI Posts: 122	Parting out the organ donor I tried this a couple months ago, but found it very hard to do before i actially started to take the truck apart. Here is my list of updated prices. Make me and offer and it will probably leave my garage! I have parts for a 72 C10 Chevy pickup that i am selling. Most of these will fit a 67-72 Chevy truck. Cab is sold all ready with every thing in it except the column and the gauge panel Radiator - $40 Box front panel - $20 Cowl panel - $20 Upper control arms - $30 each Lower control Arms - $40 each Rear differential - $150 Brake booster / Master cylinder - $30 Spindles - $30 each Brake calipers - $30 each Front springs - $20 / pair Bell housing for 4 speed transmission - $75 Under dash harness w/ fuse block - $100 Alternator and headlight harness - $75 Edelbrock 600 cfm carb with electric choke - $200 obo If there is any thing else you might be looking for let me know. Items I know I am keeping are: Box sides tailgate hood fenders front and rear bumpers drivers door front and rear wheel wells/ tubs __________________ Chris "Bam Bam" Shields Little Chute, WI 1970 Chevy Longhorn C20 in progress 2007 Chevy Vortech MAX - every day beast Project Longhorn Last edited by Bam Bam 56; 07-26-2010 at 11:45 AM. Reason: price updates

07-21-2009, 09:31 AM	#2
TomsCheyenne Registered User Join Date: Jun 2009 Location: Mechanic Falls, Maine 04256 Posts: 62	Re: Parting out the organ donor I need the front inner fenders for my '71, are those for sale, and what is the shape/price? Thank you.

07-21-2009, 09:46 AM	#3
Bam Bam 56 Registered User Join Date: Jun 2007 Location: Little Chute, WI Posts: 122	Re: Parting out the organ donor Sorry, i forgot to include those on my list that i am keeping. I have updated my list __________________ Chris "Bam Bam" Shields Little Chute, WI 1970 Chevy Longhorn C20 in progress 2007 Chevy Vortech MAX - every day beast Project Longhorn

07-21-2009, 01:48 PM	#4
kacz81 Registered User Join Date: Jul 2009 Location: Shorewood,IL. Posts: 75	Re: Parting out the organ donor I need both headlight bezels and drivers headlight bucket for my 72 do you have those for sale

07-21-2009, 02:34 PM	#5
Bam Bam 56 Registered User Join Date: Jun 2007 Location: Little Chute, WI Posts: 122	Re: Parting out the organ donor the headlight buckets and bezels were junk so i tossed them, sorry. looked like some one tried to do a custom job on them __________________ Chris "Bam Bam" Shields Little Chute, WI 1970 Chevy Longhorn C20 in progress 2007 Chevy Vortech MAX - every day beast Project Longhorn Last edited by Bam Bam 56; 07-21-2009 at 02:34 PM.

07-28-2009, 09:35 PM	#6
spatz Registered User Join Date: Mar 2009 Location: Flint, Mi Posts: 200	Re: Parting out the organ donor Hey Bam Bam 56, is the rear axle a 5 x 5 wheel pattern for the coil spring rear? also on the bed floor, does it still have the crossmembers on it. On the frame how is the shape of the main engine/suspension crossmember let me know and we can work up some type of deal thanks

07-28-2009, 11:26 PM	#7
Cyclone44 Step Brother Join Date: Sep 2007 Location: K-town Posts: 4,029	Re: Parting out the organ donor Gauge Panel - $120, I would like a picture of this please.....

07-29-2009, 12:24 AM	#8
CSGAS optomistic ah-so Join Date: Mar 2009 Location: Charlotte, NC Posts: 544	Re: Parting out the organ donor That's a standard V8 radiator? 28 7/8" between the tanks? I'll take it if it is, and has no leaks...let me know what the shipping will be to 28027 for ya...thanx! __________________ Rubbing is Racin' Ribbing is Bench Racin' 1970 C-10 lwb Fleetside. Originally 350 2-bbl 3-on-the-tree, m/b, m/w, m/s no a/c. Currently running on a '76 Camaro 305.

07-29-2009, 02:11 PM	#9
Bam Bam 56 Registered User Join Date: Jun 2007 Location: Little Chute, WI Posts: 122	Re: Parting out the organ donor Spatz, the rear is for a leaf spring rear and has the 5x4.75 pattern measured from the outside of 1 lug, to the inside if the lug across from it. for the bed floor i have the cross sills but need them for my truck. As far as the engine cross member, it is in really good shape just needs to be cleaned up, however, i would hate to split that from the rest of the frame since that would make what remains almost worthless. I would be willing to split it but im not sure what the price would be. It would have to be worth junking the frame basicly. Unless others need other crossmembers or mounts from it. __________________ Chris "Bam Bam" Shields Little Chute, WI 1970 Chevy Longhorn C20 in progress 2007 Chevy Vortech MAX - every day beast Project Longhorn

07-29-2009, 02:12 PM	#10
Bam Bam 56 Registered User Join Date: Jun 2007 Location: Little Chute, WI Posts: 122	Re: Parting out the organ donor Cyclone, i will get pictures of the gauge panel for you __________________ Chris "Bam Bam" Shields Little Chute, WI 1970 Chevy Longhorn C20 in progress 2007 Chevy Vortech MAX - every day beast Project Longhorn

07-29-2009, 02:13 PM	#11
Bam Bam 56 Registered User Join Date: Jun 2007 Location: Little Chute, WI Posts: 122	Re: Parting out the organ donor CSGAS, it is the standard radiator. I will confirm the measurements for you and weigh it for shipping __________________ Chris "Bam Bam" Shields Little Chute, WI 1970 Chevy Longhorn C20 in progress 2007 Chevy Vortech MAX - every day beast Project Longhorn

07-29-2009, 02:34 PM	#12
justin26 Registered User Join Date: Feb 2009 Location: hot springs arkansas Posts: 101	Re: Parting out the organ donor how are the hood hinges shipping to 71901

07-29-2009, 02:59 PM	#13
Bam Bam 56 Registered User Join Date: Jun 2007 Location: Little Chute, WI Posts: 122	Re: Parting out the organ donor Justin, estimating the shipping weight at 20 lbs since i dont have them in front of me it looks like it would be $57 __________________ Chris "Bam Bam" Shields Little Chute, WI 1970 Chevy Longhorn C20 in progress 2007 Chevy Vortech MAX - every day beast Project Longhorn

07-29-2009, 03:00 PM	#14
Bam Bam 56 Registered User Join Date: Jun 2007 Location: Little Chute, WI Posts: 122	Re: Parting out the organ donor Justin, forgot to answer your question. the hinges are in good condition just need to be cleaned up __________________ Chris "Bam Bam" Shields Little Chute, WI 1970 Chevy Longhorn C20 in progress 2007 Chevy Vortech MAX - every day beast Project Longhorn Last edited by Bam Bam 56; 07-29-2009 at 03:02 PM.

07-29-2009, 03:23 PM	#15
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,862	Re: Parting out the organ donor how far are you from Milwaukee? are you willing to part the axle assy? Im interested in the shafts __________________ 1967custom



Register or Log In To remove these advertisements.

07-29-2009, 03:31 PM	#16
Bam Bam 56 Registered User Join Date: Jun 2007 Location: Little Chute, WI Posts: 122	Re: Parting out the organ donor Im about 2 hours from Milwaukee, If spatz decides he doesnt want the rear end I will sell the axles separate if you'd like, i would have to get a price __________________ Chris "Bam Bam" Shields Little Chute, WI 1970 Chevy Longhorn C20 in progress 2007 Chevy Vortech MAX - every day beast Project Longhorn

07-29-2009, 03:42 PM	#17
oldschooler Registered User Join Date: Mar 2007 Location: spring grove, Pa. Posts: 538	Re: Parting out the organ donor I would like the disc brake shields, If you dont mind taking them off the spindles. Shipped to 17362. Thanks, Rich

07-29-2009, 05:11 PM	#18
spatz Registered User Join Date: Mar 2009 Location: Flint, Mi Posts: 200	Re: Parting out the organ donor Hey chris, Ill pass on the axle and the bed floor but im interested in the frame, was it an auto or manual and could use the frame from about three to four foot back, Ill have to figure a way of hauling it, and I wouldn't be able to get your way until Oct or Nov.

07-29-2009, 05:25 PM	#19
Bam Bam 56 Registered User Join Date: Jun 2007 Location: Little Chute, WI Posts: 122	Re: Parting out the organ donor Here is a picture of the dash, best we could do with the wheel still in the way http://i930.photobucket.com/albums/a...g?t=1248904757 __________________ Chris "Bam Bam" Shields Little Chute, WI 1970 Chevy Longhorn C20 in progress 2007 Chevy Vortech MAX - every day beast Project Longhorn

07-29-2009, 05:39 PM	#20
Bam Bam 56 Registered User Join Date: Jun 2007 Location: Little Chute, WI Posts: 122	Re: Parting out the organ donor Oldschooler, $50 shipped, i would be able to remove them on Friday __________________ Chris "Bam Bam" Shields Little Chute, WI 1970 Chevy Longhorn C20 in progress 2007 Chevy Vortech MAX - every day beast Project Longhorn

07-29-2009, 06:00 PM	#22
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,862	Re: Parting out the organ donor ok let me see if my plans to go to milwaukee stay in effect for next monthand if you still have them. Ill cantact you again __________________ 1967custom

07-29-2009, 06:48 PM	#23
crimespree Registered User Join Date: May 2009 Location: Dothan, AL Posts: 94	Re: Parting out the organ donor care to ship that power steering pump to alabama? __________________ 1970 CST - http://67-72chevytrucks.com/vboard/s...d.php?t=350091 1979 Yamaha xs650 bobber - sold 2008 Harley Nightster

07-29-2009, 07:06 PM	#24
Bam Bam 56 Registered User Join Date: Jun 2007 Location: Little Chute, WI Posts: 122	Re: Parting out the organ donor whats the zip? __________________ Chris "Bam Bam" Shields Little Chute, WI 1970 Chevy Longhorn C20 in progress 2007 Chevy Vortech MAX - every day beast Project Longhorn

Register or Log In To remove these advertisements.