![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Member since 2000
Join Date: Dec 2000
Location: Mountain View Ca / Mexico
Posts: 7,879
|
bolts for engine stand?
i got one of those engine stand that bolt to where the tranny bolts to the motor. any one got any idea what the bolt size are for it? and what grade? thanks
|
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Dec 2002
Location: kelowna b.c. canada
Posts: 75
|
Alexis: what size engine have you got? always use grade 8 bolts on a stand.
__________________
'68 Chev C-10 '91 Western Star (workin wheels) Just an ole time truckin idiot! Jim G. |
![]() |
![]() |
![]() |
#3 |
Fabricate till you "puke"
Join Date: Jun 2002
Location: Ill
Posts: 9,403
|
The bell bolts are 3/8 -16 NC thread on the chevys
__________________
69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears.... |
![]() |
![]() |
![]() |
#4 |
Member since 2000
Join Date: Dec 2000
Location: Mountain View Ca / Mexico
Posts: 7,879
|
i got me a 350, i decided not to be lazy and actually do some searching, 3/2 were it. thanks for helping
|
![]() |
![]() |
![]() |
#5 |
So Many Ideas, So Little Money
Join Date: Sep 2001
Location: Marshalltown, IA
Posts: 1,610
|
I don't use grade 8, not even on a big block, just goto thebolt bin, grab them and grab the 9/16 end wrench
__________________
72 Blazer 3/4 ton running gear 4.10s NP205/TH350 350 4in lift half doors 71 C10 with 454 99 S-10 5.1L SBC 700R4 09 Malibu ![]() Marshalltown, Iowa |
![]() |
![]() |
![]() |
#6 | |
Registered User
Join Date: Mar 2002
Location: Agua Dulce, Ca. usa
Posts: 179
|
Quote:
__________________
Ed ke6bnl Agua Dulce 70 S.E. Los Angeles 70 Chevy short bed 1948 F3 ford pu 1949 F1 stock V8 flathead 3 on floor 1950 F1 pu street rod 1948 F6 Ford Dually/350sbc no bed stock trans&rear 1972 El Camino 4" chop 1953 Chevy 3100 2b daily driver 1970 SB 4X4 400ci 6in lift |
|
![]() |
![]() |
![]() |
#7 |
Senior Member
![]() Join Date: Dec 1999
Location: Darrington, Washington
Posts: 3,963
|
I dont use grade 8 now,i got 2 big blocks on stands right now that have been on there for atleast 6 months,they lean,but as long as you use a correct length bolt and not to use 20 washers,then the bolt wont be too stressed and snap,grade 8 is actually more brittle in some instances and snap,alot of the tractor guys and farm workers around here actually use grade 5 theyd rather have the bolt shear of than break the part.
|
![]() |
![]() |
![]() |
#8 |
Recovering Truck Driver
Join Date: Mar 2002
Location: Orleans, NE USA
Posts: 1,883
|
I use bell housing bolts and spacers
__________________
67 K-20 350, SM465, Eaton rear, 4.56 no spin option 00 Dodge 2500 4x4, 24V cummins, 5 speed Chad South Central Nebraska |
![]() |
![]() |
![]() |
#9 |
Just Another Crazy Canuck
Join Date: Dec 2000
Location: Richmond,British Columbia Canada
Posts: 1,228
|
exhaust manifold bolts for me ;D
__________________
1985 ![]() ![]() ![]() soon to be installed: 14bDETROIT,Edelbrock Performer cam,intake and valve springs,Comp roller tips,MSD HEI |
![]() |
![]() |
![]() |
#10 |
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,693
|
What ever I can find in my magic nut and bolt box at teh time of putting the engine on the stand.
|
![]() |
![]() |
![]() |
Bookmarks |
|
|