Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
|
01-08-2003, 10:00 PM | #1 |
Registered User
Join Date: Feb 2000
Location: Gassville, AR
Posts: 246
|
removing stepside fenders...
I was taking my bed apart on my stepside and I was wondering the best way to get the fenders off because when I tried to remove one of the screws it started to strip so I stop. I thought I would ask how you guys get your off before I tried anything else.
Thanks Taylor
__________________
'72 S/S Chevy- in progress |
01-08-2003, 10:15 PM | #2 |
State of Confusion!
Join Date: Jul 2002
Location: Gulfport, MS USA
Posts: 47,216
|
My bed sides were shot, so I took my grinder with a cutting wheel and ground off the heads, then yeanked them off. I tried on a few to use a rachet set with the screw head, but the 30+ year old screws kept striping out.
On my replacement bed, I cut the bolts from inside the step fender (grinder again). Got to be carefull so you don't damage the fenders. Don't know any other way myself.
__________________
Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God! |
01-08-2003, 10:19 PM | #3 |
Seasonal Poster
Join Date: Apr 2002
Location: Kelowna BC Canada
Posts: 896
|
ya i had to grind my bolt heads off as well for the same reason as palf70step...those old bolts are tuff cookies
__________________
67 GMC Short Step 350/4-Speed/3.08 Posi Front/Rear Sway Bars Kelowna BC, Canada Member of DTPW |
01-08-2003, 10:24 PM | #4 |
Currently Blazerless
Join Date: Apr 2000
Location: St. Joseph Mo.
Posts: 4,828
|
If you have access to a welder you can place a large nut over the screw head and weld it in the center, the heat from welding will help break the bond and then just use a ratchet or wrench to remove.
|
01-08-2003, 10:26 PM | #5 |
Registered User
Join Date: Feb 2001
Location: East Central, MO
Posts: 11,336
|
I used a vise grips on the head and twisted them off.
|
Bookmarks |
|
|