underneath pics of blazer please - The 1947 - Present Chevrolet & GMC Truck Message Board Network

timzrides · 08-03-2009, 08:56 PM

I'm thinking my next project will be a 70 blazer. however, there seems to be a rust issue, go figure. does anyone have any bottom side pictures. the area around the rockers would be great because that seems to be the troubled spot. i don't know to much about the blazer parts other than there don't seem to be many repo parts for the floor to the rockers. thanks and any good info would be great.

tim

**lks dcvn** · 08-04-2009, 07:51 AM

I don't have any pix for you - but I will say that almost every patch panel is now out there to rebuild a Blazer/Jimmy in the floor/rocker area.

Most of the truck stuff works and the Blazer specific parts are now made and/or stocked by the board vendors.

1949gmc · 08-04-2009, 10:16 AM

There are a ton of pictures already on this site that are a huge help in the floor area of the blazers. Do a search for 'rockers' or 'torsion boxes' and you should come up with some good results.

These two threads, and countless others, have been an ENORMOUS help to me in getting my rustbucket figured out:

Project Bolt One On: http://67-72chevytrucks.com/vboard/s...d.php?t=249323

PO has me PO'd: http://67-72chevytrucks.com/vboard/s...d.php?t=210641

Also, go to the 1969-1972 Blazer/Jimmy Index guide and look at the threads that are posted there. You can't get much better than that.

08-03-2009, 08:56 PM	#1
timzrides Registered User Join Date: Jan 2007 Location: Illinois Posts: 351	underneath pics of blazer please I'm thinking my next project will be a 70 blazer. however, there seems to be a rust issue, go figure. does anyone have any bottom side pictures. the area around the rockers would be great because that seems to be the troubled spot. i don't know to much about the blazer parts other than there don't seem to be many repo parts for the floor to the rockers. thanks and any good info would be great. tim

08-04-2009, 07:51 AM	#2
lks dcvn Registered User Join Date: Jan 2007 Location: Columbus, Ohio Posts: 4,348	Re: underneath pics of blazer please I don't have any pix for you - but I will say that almost every patch panel is now out there to rebuild a Blazer/Jimmy in the floor/rocker area. Most of the truck stuff works and the Blazer specific parts are now made and/or stocked by the board vendors.

08-04-2009, 10:16 AM	#3
1949gmc Registered User Join Date: Nov 2004 Location: Lindenhurst, IL Posts: 659	Re: underneath pics of blazer please There are a ton of pictures already on this site that are a huge help in the floor area of the blazers. Do a search for 'rockers' or 'torsion boxes' and you should come up with some good results. These two threads, and countless others, have been an ENORMOUS help to me in getting my rustbucket figured out: Project Bolt One On: http://67-72chevytrucks.com/vboard/s...d.php?t=249323 PO has me PO'd: http://67-72chevytrucks.com/vboard/s...d.php?t=210641 Also, go to the 1969-1972 Blazer/Jimmy Index guide and look at the threads that are posted there. You can't get much better than that.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.