![]() |
|
![]() |
#1 |
Blaze-Air
Join Date: Nov 2008
Location: Virginia
Posts: 1,117
|
leaking brake lines
I put new disk brake hoses from Carquest on my truck. They keep leaking where they bolt to caliper. I replaced cooper gaskets, and still leak. Anybody else have this problem? They're 73 style. Square blocks.
|
![]() |
![]() |
![]() |
#2 |
67-72 parts collector,…
![]() Join Date: Nov 2002
Location: Mid-MO
Posts: 22,699
|
Re: leaking brake lines
I assume you have 2 copper gaskets per hose/block?
They have to be really tight when they are new gaskets being crushed for the first time.
__________________
Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823 |
![]() |
![]() |
![]() |
#3 |
Blaze-Air
Join Date: Nov 2008
Location: Virginia
Posts: 1,117
|
Re: leaking brake lines
Yea, 2 gaskets ea time. These hoses never fit flat on the caliper to begin with. I had to gently persuade them to a flatter fit. It's just the passenger side.
I have some thicker gaskets, but I don't see that as a resolution. I cranked them hard. I'm always worried about stripping threads. |
![]() |
![]() |
![]() |
#4 |
67-72 parts collector,…
![]() Join Date: Nov 2002
Location: Mid-MO
Posts: 22,699
|
Re: leaking brake lines
I have the steel line of the rubber hose pointing up. Is that the way you have them?
Any pics?
__________________
Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823 |
![]() |
![]() |
![]() |
#5 |
Blaze-Air
Join Date: Nov 2008
Location: Virginia
Posts: 1,117
|
Re: leaking brake lines
I don't have a close up enough pic. It runs forwards. If I remember, that was the only way it could route. I'll be crawling under it tomorrow. The Dr side is fine.
|
![]() |
![]() |
![]() |
#6 |
Happy to be here
![]() Join Date: Mar 2000
Location: Cypress, TX
Posts: 39,023
|
Re: leaking brake lines
Are you running dropped spindles? You might have to tweak the line to help in clear the spindle casting.
__________________
Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra" |
![]() |
![]() |
![]() |
#7 |
Blaze-Air
Join Date: Nov 2008
Location: Virginia
Posts: 1,117
|
Re: leaking brake lines
|
![]() |
![]() |
![]() |
#8 |
Blaze-Air
Join Date: Nov 2008
Location: Virginia
Posts: 1,117
|
Re: leaking brake lines
Here is a pic of the driver side hose. Not the best angle, but you can see the routing.
![]() |
![]() |
![]() |
![]() |
#9 |
67-72 parts collector,…
![]() Join Date: Nov 2002
Location: Mid-MO
Posts: 22,699
|
Re: leaking brake lines
Looks fine at the caliper. Does it rub on the spindle/upper ball joint?
__________________
Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823 |
![]() |
![]() |
![]() |
#10 |
sharp as a marble
![]() Join Date: Jan 2007
Location: atlantic beach,florida
Posts: 1,082
|
Re: leaking brake lines
I am with N2TRUX. I might snug the line up, and see where it hits, if it hits the upr bj nut or spindle. Then try and bend the line away from that and see you can then remove the line, and bolt it back up without having to make it fit. In other words have it bolt up in a relaxed way????
|
![]() |
![]() |
![]() |
#11 |
Blaze-Air
Join Date: Nov 2008
Location: Virginia
Posts: 1,117
|
Re: leaking brake lines
I got up there today. Just for kicks I put a wrench on it. It tightened down a bit more. I'll bleed, see what happens. Nothing hits or rubs, but I agree with cparman that it should bolt in a more relaxed way.
|
![]() |
![]() |
![]() |
Bookmarks |
|
|