|
|
|
08-13-2007, 02:04 PM
|
#1 |
|
Texas Big Wig
Join Date: Jan 2007
Location: Mineola, Texas
Posts: 5,620
|
Dropped Cup LCA's
ok guys, here it is
I'm back from see'n my brother & bag'n the front of my truck I took a lot of pics, so I'm not gonna post em all... Here is a link Ima skip the disassembly & start with the good stuff Cut'n the bump stop off   Bolt the upper plate to the bag & mock it up   Made the lower cup     
Last edited by augie; 04-06-2011 at 01:46 AM. |
|
|
08-13-2007, 02:09 PM
|
#2 |
|
Texas Big Wig
Join Date: Jan 2007
Location: Mineola, Texas
Posts: 5,620
|
Re: Lower A-arm ???
Mocked up the lower cup & A-arm, so we could trace where to cut
   Cut'n out   We leveled the cup to the bottom edge of the A-arm   
Last edited by augie; 04-06-2011 at 01:47 AM. |
|
|
|
08-13-2007, 02:15 PM
|
#4 |
|
Texas Big Wig
Join Date: Jan 2007
Location: Mineola, Texas
Posts: 5,620
|
Re: Lower A-arm ???
Drilled a hole it the cross member & put a grommet in for the hose to run through
  Bag installed for good     My temp for airing them up  
Last edited by augie; 04-06-2011 at 01:51 AM. |
|
|
|
08-13-2007, 02:17 PM
|
#5 |
|
Texas Big Wig
Join Date: Jan 2007
Location: Mineola, Texas
Posts: 5,620
|
Re: Lower A-arm ???
Bolting up the lower A-arm
 Putting it all back together      
Last edited by augie; 04-06-2011 at 01:53 AM. |
|
|
 |
| Bookmarks |
|
|
Hybrid Mode
