How to remove "Custom C10" logos? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

7T2 · 08-06-2009, 07:21 PM

I mean, I know how they are attached, but how do I get to the nuts on the back without tearing the whole truck apart?

I want to paint my center section of my truck white, and this is the last thing I need to get out of the way. Seems like every way I approach these logos I run into a roadblock. Too far up to reach from the bottom, too much stuff in the way under the hood to get at from the inside, and the metal that surrounds the vents is in the way if I try to get at them through the door jamb.

Any other suggestions? I thought about loosening up the inner fender next, but it doesn't look like it would move out of the way enough to do any good.

It's a 72, by the way.

Sinister · 08-06-2009, 07:27 PM

Pretty sure the only way is to pull the fenders to get those off. If somebody knows some other way I'm sure they'll post it.

Tx Firefighter · 08-06-2009, 07:35 PM

Drop the inner fenderwell on the back end and use a wrench.

landsurvey1 · 08-06-2009, 08:30 PM

Quote:

Originally Posted by Tx Firefighter

Drop the inner fenderwell on the back end and use a wrench.

That's what I did.

08-06-2009, 07:21 PM	#1
7T2 Active Member Join Date: Dec 2004 Location: Marysville, OH Posts: 667	How to remove "Custom C10" logos? I mean, I know how they are attached, but how do I get to the nuts on the back without tearing the whole truck apart? I want to paint my center section of my truck white, and this is the last thing I need to get out of the way. Seems like every way I approach these logos I run into a roadblock. Too far up to reach from the bottom, too much stuff in the way under the hood to get at from the inside, and the metal that surrounds the vents is in the way if I try to get at them through the door jamb. Any other suggestions? I thought about loosening up the inner fender next, but it doesn't look like it would move out of the way enough to do any good. It's a 72, by the way. __________________ 1957 GMC Ambulance 1962 Belair Wagon 1963 C80 Truck Cab FOR SALE 1969 Chevy C10 Short Bed 1972 Chevy C10 Long Bed SOLD 1996 C3500 Dually SOLD

08-06-2009, 07:27 PM	#2
Sinister Between Trucks... Join Date: Mar 2002 Location: Los Angeles, CA. Posts: 3,830	Re: How to remove "Custom C10" logos? Pretty sure the only way is to pull the fenders to get those off. If somebody knows some other way I'm sure they'll post it. __________________ Beat it to fit, Paint it to match...

08-06-2009, 07:35 PM	#3
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Re: How to remove "Custom C10" logos? Drop the inner fenderwell on the back end and use a wrench. __________________ I'm on the Instagram- @Gearhead_Kevin



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.