![]() |
|
![]() |
#1 |
72 chevys 4 life
Join Date: Aug 2008
Location: Crescent,Ok
Posts: 406
|
350 motor build
okay intelligent gear heads i need some help.
Im building a 350 4 bolt main. Its bored 30 over with dome pistons with which if i had 76 cc chambered heads my compression would be 9.3 to 1. I have a mutha thumpr cam. stock crank. I originally planned on using my heads which were 76 cc chambers which would be alright putting my compression at 9.3 to 1. come to find out they are cracked. i have a friend that has a set of camel humps which are 62cc chambers what would it put my compression ratio at? I kinda want to be able to run pump gas still is all im worried about...
__________________
I dont call it being young and dumb....I call it young and havin fun ![]() Last edited by drewdude92; 08-12-2009 at 11:10 PM. |
![]() |
![]() |
![]() |
#2 |
72 chevys 4 life
Join Date: Aug 2008
Location: Crescent,Ok
Posts: 406
|
Re: 350 motor build
here are the specs on the heads 3782461....64-66...327......Camel hump,no accessory holes,160/62cc port volumes,62cc chamber
__________________
I dont call it being young and dumb....I call it young and havin fun ![]() |
![]() |
![]() |
![]() |
Bookmarks |
|
|