71-72 K10 front axle - The 1947 - Present Chevrolet & GMC Truck Message Board Network

chipflyer · 08-27-2009, 09:02 PM

I have a six lug front axle assembly from a 72 1/2 ton Chevy with 3.08 gears that I have decided not to use. $100 picked up here in Topeka. If you are headed to teeitups place to pick anything up I am just 5 miles southwest of him.

Jeff

duallyjams · 08-28-2009, 07:19 AM

You could part it out. The flat top knuckles go for around 65.

chipflyer · 08-31-2009, 01:49 PM

Not interested in parting it out, would just like to see it all go to someone who could use it.

TTT

decodan · 08-31-2009, 10:13 PM

Hey Jeff,

If it were paid for how long would you baby sit it. I don't know how it would be before I could make the trip. Could be a month or little more.
If you can do that I would take it.
Let me know, Dan

chipflyer · 08-31-2009, 10:33 PM

Hi Dan,
If paid for it could stay for a couple of months, max. I am just a few miles north of I-70, easy to find and Teeitup is just up the road 5 minutes if you are looking for other parts.
Let me know.

Jeff

decodan · 08-31-2009, 10:36 PM

Hey Jeff,

I'll take it, just one silly question. I am pretty sure this will also fit the front of a Suburban, right?
If so, how do you want payment, Paypal OK?
Dan

chipflyer · 08-31-2009, 10:39 PM

PM sent Dan. Far as I know it should bolt right up, but I am not 100% on that.

Jeff

decodan · 08-31-2009, 10:47 PM

Jeff,

Haven't gotten the PM yet. I also sent you one.
I'll gamble that it will work. I have a drum brake 3.08 in my Burb so worst case is i have it for parts.
So, that means it is a for sure, "I'll Take It."
Dan

decodan · 08-31-2009, 10:53 PM

Hey Jeff,
Paypal sent. PM me your address and phone and I'll let you know asap when I can come get it. Now, I'll go and ask if it fits for sure.
Thanks,
Dan

chipflyer · 08-31-2009, 10:58 PM

Will do Dan. Axle is sold.
Thanks

**BAD4X4** · 08-31-2009, 11:52 PM

Dan it will built right in no problem. Just have to change brake lines.

decodan · 09-01-2009, 08:16 AM

Thank you,
Dan

08-27-2009, 09:02 PM	#1
chipflyer Registered User Join Date: May 2004 Location: Topeka, Ks Posts: 2,293	71-72 K10 front axle I have a six lug front axle assembly from a 72 1/2 ton Chevy with 3.08 gears that I have decided not to use. $100 picked up here in Topeka. If you are headed to teeitups place to pick anything up I am just 5 miles southwest of him. Jeff Attached Images __________________ I'm not a pessimist, I'm just optimistic that bad things are going to happen. 1971 Cheyenne Super K10 - tilt, cruise, air, am/fm, tow hooks, factory buckets! 1986 Jeep J10 pickup, - 5.3L Vortec with 4L60e and NP241. Last edited by chipflyer; 08-27-2009 at 09:05 PM.

08-28-2009, 07:19 AM	#2
duallyjams Registered User Join Date: May 2007 Location: Deale Md Posts: 4,663	Re: 71-72 K10 front axle You could part it out. The flat top knuckles go for around 65. __________________ James 63 GMC V6 4speed carryall 65 chevy swb bbw V8 auto 68 K20 327/4 speed, buddy buckets 2002 GMC CC Dually Duramax 64 GMC lwb 3/4 V6 4speed SOLD 66 GMC swb bbw buddy buckets SOLD IG duallyjams The only thing that stays the same is constant change!

08-31-2009, 01:49 PM	#3
chipflyer Registered User Join Date: May 2004 Location: Topeka, Ks Posts: 2,293	Re: 71-72 K10 front axle Not interested in parting it out, would just like to see it all go to someone who could use it. TTT __________________ I'm not a pessimist, I'm just optimistic that bad things are going to happen. 1971 Cheyenne Super K10 - tilt, cruise, air, am/fm, tow hooks, factory buckets! 1986 Jeep J10 pickup, - 5.3L Vortec with 4L60e and NP241.

08-31-2009, 10:13 PM	#4
decodan C-20 Long Stroker Join Date: Oct 2005 Location: Frohna, MO Posts: 137	Re: 71-72 K10 front axle Hey Jeff, If it were paid for how long would you baby sit it. I don't know how it would be before I could make the trip. Could be a month or little more. If you can do that I would take it. Let me know, Dan __________________ "A Hand Shake Is Your Word." Decodan ************************ 1951 Chevrolet Suburban 1952 GMC Suburban 1963 Mercury Comet 2-dr (Sorry, I know) 1963 Mercury Comet 2-dr Parts Car, (better than what I originally started with) 2010 F-150 4WD 2015 Subaru Outback (what the hey, got to have one that is not a gas hog)

08-31-2009, 10:33 PM	#5
chipflyer Registered User Join Date: May 2004 Location: Topeka, Ks Posts: 2,293	Re: 71-72 K10 front axle Hi Dan, If paid for it could stay for a couple of months, max. I am just a few miles north of I-70, easy to find and Teeitup is just up the road 5 minutes if you are looking for other parts. Let me know. Jeff __________________ I'm not a pessimist, I'm just optimistic that bad things are going to happen. 1971 Cheyenne Super K10 - tilt, cruise, air, am/fm, tow hooks, factory buckets! 1986 Jeep J10 pickup, - 5.3L Vortec with 4L60e and NP241.

08-31-2009, 10:36 PM	#6
decodan C-20 Long Stroker Join Date: Oct 2005 Location: Frohna, MO Posts: 137	Re: 71-72 K10 front axle Hey Jeff, I'll take it, just one silly question. I am pretty sure this will also fit the front of a Suburban, right? If so, how do you want payment, Paypal OK? Dan __________________ "A Hand Shake Is Your Word." Decodan ************************ 1951 Chevrolet Suburban 1952 GMC Suburban 1963 Mercury Comet 2-dr (Sorry, I know) 1963 Mercury Comet 2-dr Parts Car, (better than what I originally started with) 2010 F-150 4WD 2015 Subaru Outback (what the hey, got to have one that is not a gas hog)

08-31-2009, 10:39 PM	#7
chipflyer Registered User Join Date: May 2004 Location: Topeka, Ks Posts: 2,293	Re: 71-72 K10 front axle PM sent Dan. Far as I know it should bolt right up, but I am not 100% on that. Jeff __________________ I'm not a pessimist, I'm just optimistic that bad things are going to happen. 1971 Cheyenne Super K10 - tilt, cruise, air, am/fm, tow hooks, factory buckets! 1986 Jeep J10 pickup, - 5.3L Vortec with 4L60e and NP241. Last edited by chipflyer; 08-31-2009 at 10:43 PM.

08-31-2009, 10:47 PM	#8
decodan C-20 Long Stroker Join Date: Oct 2005 Location: Frohna, MO Posts: 137	Re: 71-72 K10 front axle Jeff, Haven't gotten the PM yet. I also sent you one. I'll gamble that it will work. I have a drum brake 3.08 in my Burb so worst case is i have it for parts. So, that means it is a for sure, "I'll Take It." Dan __________________ "A Hand Shake Is Your Word." Decodan ************************ 1951 Chevrolet Suburban 1952 GMC Suburban 1963 Mercury Comet 2-dr (Sorry, I know) 1963 Mercury Comet 2-dr Parts Car, (better than what I originally started with) 2010 F-150 4WD 2015 Subaru Outback (what the hey, got to have one that is not a gas hog)

08-31-2009, 10:53 PM	#9
decodan C-20 Long Stroker Join Date: Oct 2005 Location: Frohna, MO Posts: 137	Re: 71-72 K10 front axle Hey Jeff, Paypal sent. PM me your address and phone and I'll let you know asap when I can come get it. Now, I'll go and ask if it fits for sure. Thanks, Dan __________________ "A Hand Shake Is Your Word." Decodan ************************ 1951 Chevrolet Suburban 1952 GMC Suburban 1963 Mercury Comet 2-dr (Sorry, I know) 1963 Mercury Comet 2-dr Parts Car, (better than what I originally started with) 2010 F-150 4WD 2015 Subaru Outback (what the hey, got to have one that is not a gas hog)

08-31-2009, 10:58 PM	#10
chipflyer Registered User Join Date: May 2004 Location: Topeka, Ks Posts: 2,293	Re: 71-72 K10 front axle Will do Dan. Axle is sold. Thanks __________________ I'm not a pessimist, I'm just optimistic that bad things are going to happen. 1971 Cheyenne Super K10 - tilt, cruise, air, am/fm, tow hooks, factory buckets! 1986 Jeep J10 pickup, - 5.3L Vortec with 4L60e and NP241.

08-31-2009, 11:52 PM	#11
BAD4X4 Senior Member Join Date: Jan 2003 Location: La pine Oregon Posts: 1,668	Re: 71-72 K10 front axle Dan it will built right in no problem. Just have to change brake lines. __________________ 1972 Cheyenne K-30 6"lift {502 PROJECT} 1972 Cheyenne K-30 8"lift 454 450hp {Ol'Blue} 1972 Cheyenne K-20 Custom Stretch 6" lift 454 1972 Custom Deluxe K-20 4" lift 2007 GMC Crew Cab Diesel 6"lift {The Tow Rig 2017 Ford F-350 Crew Cab 6.7 6"lift (Wife's) 1977 El Camino SS Grandpa baught new 1986 K-30 Crew Cab 502 1955 Chevy 2-Door gasser 454 550hp{project} 1956 Chevy Bel-Air 2-Door hardtop 572 700hp 1979 Ford F-350 All Original 4x4 (Wife's)

09-01-2009, 08:16 AM	#12
decodan C-20 Long Stroker Join Date: Oct 2005 Location: Frohna, MO Posts: 137	Re: 71-72 K10 front axle Thank you, Dan __________________ "A Hand Shake Is Your Word." Decodan ************************ 1951 Chevrolet Suburban 1952 GMC Suburban 1963 Mercury Comet 2-dr (Sorry, I know) 1963 Mercury Comet 2-dr Parts Car, (better than what I originally started with) 2010 F-150 4WD 2015 Subaru Outback (what the hey, got to have one that is not a gas hog)



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.