th350/np203 to sm465/205 swap questions

[84 400]

Okay as some of you know from my other threade i got a screaming deal on a rebuilt Sm465/twin sticked np205 combo. I want to swap this sonn but relistically I will prob do it this winter when back from school.

Truck spec:
1977 K10 10 bolt front 12 bolt rear atleast 4:10 gearing. Short bed curently a 350 th350 np203. running 4 inch lift with 31's on the street and 34x 10.5 swamper tsl offroad.

Parts I have:
Sm465 5k on rebuild 10 spline output
Np205 10 spline with ORD twin sticks (fixed yoke)
sm465 to Np205 mounting bracket
sm465 to np205 spline sleave
Hydro clutch bellhousing
clutch fork
flywheel
Clutch pedal
Trans mount bushings
Blaze rear drive shaft

Parts needed:
Clutch kit
Front drive shaft??
Rear drive shaft??
Crossmeber??
Slave / master/ lines for clutch (I can get this from NAPA)

Questions......
Will any of my current drive shafts work??

I know i will need to move the cross member drilling new holes in the frame but will np203 crossmeber work??

What year used the hydro clutch bell housing so I can order the right master and slave?



Any other input on the swap would be very helpful. I read the write up on CK5 and that will take care of my pedal mounting isssues.

Thanks