250 L6 Pwr steering pump/brkts. and Air Cond. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Skirkpat · 09-03-2009, 07:40 PM

250 L6 power steering pump with brackets, A/C brackets, full set of pulleys bolts and pwr. steering hoses. I am pretty sure the pump works, but am selling as-is, Came off of a 1975 Nova

125.00 plus shipping.

jagvic · 10-01-2009, 05:06 PM

Hi - I see the pulleys but they are 2 groove. How do the belts run? I have the ps and alternator on a 75 Omega now and they each use their own belt - how does the AC run???

Skirkpat · 10-01-2009, 05:37 PM

There are three grooves, the Harmonic balancer pulley has two grooves, and the thin one groove pulley sits on on top of that.

jagvic · 10-01-2009, 06:08 PM

Ah - so that gives the balancer a 3rd groove for the AC belt. Does the water pump pulley have 3 grooves also? Or does the AC belt only go around the balancer and the compressor? Thanks for your help!

Skirkpat · 10-01-2009, 06:28 PM

I was thinking about a small block with my previous post, this should explain it a little better pic = 1,000 words

jagvic · 10-01-2009, 06:50 PM

Hmmm... interesting - on my non-ac setup the groove you show for the AC belt is used for the PS... I wonder how they moved the PS forward to use the added on pulleys? But otherwise i see that the AC belt must go around the second groove in the water pump, second in the balancer and then the compressor? And that the water pump pulley is actually two pulleys.. ?

jagvic · 10-06-2009, 01:25 PM

Is there a number visible on the add-on water pump pulley? Thanks!

Skirkpat · 10-07-2009, 10:17 AM

I will try to check on that, I will have to find them in storage....PM me in a day or so if I do not get back to you.

jagvic · 10-11-2009, 02:22 AM

Hi - did you get a chance to look for the number on that pulley??? Thanks!

**NC67Chev** · 11-02-2009, 02:11 PM

Hi,

Can you tell me if the 250 I6 motor that the power steering came off of had an integrated or non-integrated head? If it came off of a non-integrated head, I would be interested in the power steering set-up and the power steering pulley.

Thanks, Mike

jagvic · 03-06-2010, 07:36 PM

Do you still have this setup? I am having a tough time finding the right parts to get my p/s pump to line up with teh add-on pulley... Thanks!!

09-03-2009, 07:40 PM	#1
Skirkpat Registered User Join Date: Dec 2008 Location: K.C. Missouri Posts: 1,024	250 L6 Pwr steering pump/brkts. and Air Cond. 250 L6 power steering pump with brackets, A/C brackets, full set of pulleys bolts and pwr. steering hoses. I am pretty sure the pump works, but am selling as-is, Came off of a 1975 Nova 125.00 plus shipping. Attached Images __________________ 1969 Short Stepside 1969 4 WD Suburban 1970 1 Ton Dually....Misfit oh, and a 2001 HD 2500, 8.1 Allison Shortbed 4 Door

10-01-2009, 05:06 PM	#2
jagvic Registered User Join Date: Sep 2009 Location: N. Attleborough, MA Posts: 8	Re: 250 L6 Pwr steering pump/brkts. and Air Cond. Hi - I see the pulleys but they are 2 groove. How do the belts run? I have the ps and alternator on a 75 Omega now and they each use their own belt - how does the AC run???

10-01-2009, 05:37 PM	#3
Skirkpat Registered User Join Date: Dec 2008 Location: K.C. Missouri Posts: 1,024	Re: 250 L6 Pwr steering pump/brkts. and Air Cond. There are three grooves, the Harmonic balancer pulley has two grooves, and the thin one groove pulley sits on on top of that. __________________ 1969 Short Stepside 1969 4 WD Suburban 1970 1 Ton Dually....Misfit oh, and a 2001 HD 2500, 8.1 Allison Shortbed 4 Door

10-01-2009, 06:08 PM	#4
jagvic Registered User Join Date: Sep 2009 Location: N. Attleborough, MA Posts: 8	Re: 250 L6 Pwr steering pump/brkts. and Air Cond. Ah - so that gives the balancer a 3rd groove for the AC belt. Does the water pump pulley have 3 grooves also? Or does the AC belt only go around the balancer and the compressor? Thanks for your help!

10-01-2009, 06:28 PM	#5
Skirkpat Registered User Join Date: Dec 2008 Location: K.C. Missouri Posts: 1,024	Re: 250 L6 Pwr steering pump/brkts. and Air Cond. I was thinking about a small block with my previous post, this should explain it a little better pic = 1,000 words Attached Images __________________ 1969 Short Stepside 1969 4 WD Suburban 1970 1 Ton Dually....Misfit oh, and a 2001 HD 2500, 8.1 Allison Shortbed 4 Door

10-01-2009, 06:50 PM	#6
jagvic Registered User Join Date: Sep 2009 Location: N. Attleborough, MA Posts: 8	Re: 250 L6 Pwr steering pump/brkts. and Air Cond. Hmmm... interesting - on my non-ac setup the groove you show for the AC belt is used for the PS... I wonder how they moved the PS forward to use the added on pulleys? But otherwise i see that the AC belt must go around the second groove in the water pump, second in the balancer and then the compressor? And that the water pump pulley is actually two pulleys.. ?

10-06-2009, 01:25 PM	#7
jagvic Registered User Join Date: Sep 2009 Location: N. Attleborough, MA Posts: 8	Re: 250 L6 Pwr steering pump/brkts. and Air Cond. Is there a number visible on the add-on water pump pulley? Thanks!

10-07-2009, 10:17 AM	#8
Skirkpat Registered User Join Date: Dec 2008 Location: K.C. Missouri Posts: 1,024	Re: 250 L6 Pwr steering pump/brkts. and Air Cond. I will try to check on that, I will have to find them in storage....PM me in a day or so if I do not get back to you. __________________ 1969 Short Stepside 1969 4 WD Suburban 1970 1 Ton Dually....Misfit oh, and a 2001 HD 2500, 8.1 Allison Shortbed 4 Door

10-11-2009, 02:22 AM	#9
jagvic Registered User Join Date: Sep 2009 Location: N. Attleborough, MA Posts: 8	Re: 250 L6 Pwr steering pump/brkts. and Air Cond. Hi - did you get a chance to look for the number on that pulley??? Thanks!

11-02-2009, 02:11 PM	#10
NC67Chev Senior Member Join Date: Oct 2009 Location: Greensboro, NC Posts: 698	Re: 250 L6 Pwr steering pump/brkts. and Air Cond. Hi, Can you tell me if the 250 I6 motor that the power steering came off of had an integrated or non-integrated head? If it came off of a non-integrated head, I would be interested in the power steering set-up and the power steering pulley. Thanks, Mike

03-06-2010, 07:36 PM	#11
jagvic Registered User Join Date: Sep 2009 Location: N. Attleborough, MA Posts: 8	Re: 250 L6 Pwr steering pump/brkts. and Air Cond. Do you still have this setup? I am having a tough time finding the right parts to get my p/s pump to line up with teh add-on pulley... Thanks!!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.