found a project on C.L. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

AirMale · 09-06-2009, 06:52 PM

Saw a pro-street project on c.l. and took a 3.5hr ride with my trailer. Poor guy started a frame up pro-street build and got sick and decided to sell everything. He had the frame sanblasted and painted but it was left outside and got a little scuzzy but no rust. He had someone cut and narrow the rear frame rails so he could stay with leaf springs. I checked all the welds and it was total overkill on bracing and boxing.... that's how I would have done it. I measured it every which way I know how and it was a perfect job. The guy included 5 huge boxes of every nut and bolt and where it goes. Spindles, springs, brakes, rotors, ps pump, everything I needed except a cab. The best part is it came with brand new GM fenders l/r and brand new 89-91 core support, an entire stepside bed that was taken appart but the only bad part was the surface rust on those huge stepside fenders. My favorite part of all this was the BRAND NEW WELD DRAGLITES with MT 31X18.50 and front skinnies too. One more thing.... a narrowed 9" housing with axles and non posi center section with 3.50 gears.....

GUESS HOW MUCH???????

AirMale · 09-06-2009, 06:54 PM

Wheels and rear

KQQL IT · 09-06-2009, 06:57 PM

Well? Dont be a tease.

PRUNEDA · 09-06-2009, 08:12 PM

Awesome find, I'd guess about 400 bucks????

Number21 · 09-06-2009, 08:58 PM

Damn, the ones I haul home on a trailer are usually rusted out and falling apart.

AirMale · 09-06-2009, 10:06 PM

I paid $900 his asking price. Reason= Weld 15X14 $255ea. 15X6 $200ea.
MT 31X18.5/15 $250ea. front tires $100 ea. All NEW never used with lugs and centercaps adds up to..... $1600!!! That alone was my deciding factor

**N2TRUX** · 09-06-2009, 10:16 PM

Sweet deal!

You going to use it or sell it? I would sell the 15's and run a set of the M/T 20's. Those would rock your ride....

AirMale · 09-06-2009, 10:23 PM

I think I'm gonna build a leaf spring stepside pro-street. I'm curious about those caltracs. My 86 is waiting for a moser-60 and that will see 20X15's in the rear. Only so much $$$ to go around. I can probably build the stepside for less than $5-7k just for fun.

flamingbig10 · 09-07-2009, 01:04 AM

nice find on the parts here you some inspiration on a pro street step side

YouTube - Pro Street 82 Chevy Truck Street Racing!

KQQL IT · 09-07-2009, 01:43 AM

cal tracs work! my pile went from 2.20s to 1.67 60 fts with the bars and tech help from them.

68 TT · 09-07-2009, 09:58 AM

Quote:

Originally Posted by KQQL IT

cal tracs work! my pile went from 2.20s to 1.67 60 fts with the bars and tech help from them.

x2.

I have seen as low as 1.45 60's with my Cal-Trac's on a 275/60 drag radial and even faster on slicks.

09-06-2009, 06:52 PM	#1
AirMale Senior Member Join Date: Jan 2003 Location: Atlantic City, NJ Posts: 1,073	found a project on C.L. Saw a pro-street project on c.l. and took a 3.5hr ride with my trailer. Poor guy started a frame up pro-street build and got sick and decided to sell everything. He had the frame sanblasted and painted but it was left outside and got a little scuzzy but no rust. He had someone cut and narrow the rear frame rails so he could stay with leaf springs. I checked all the welds and it was total overkill on bracing and boxing.... that's how I would have done it. I measured it every which way I know how and it was a perfect job. The guy included 5 huge boxes of every nut and bolt and where it goes. Spindles, springs, brakes, rotors, ps pump, everything I needed except a cab. The best part is it came with brand new GM fenders l/r and brand new 89-91 core support, an entire stepside bed that was taken appart but the only bad part was the surface rust on those huge stepside fenders. My favorite part of all this was the BRAND NEW WELD DRAGLITES with MT 31X18.50 and front skinnies too. One more thing.... a narrowed 9" housing with axles and non posi center section with 3.50 gears..... GUESS HOW MUCH??????? Attached Images __________________ 86 SWB 9.0 LITER T-400-OD 4.11 eaton-4/5 drop Best 1/4 12.51 @112mph no traction

09-06-2009, 06:54 PM	#2
AirMale Senior Member Join Date: Jan 2003 Location: Atlantic City, NJ Posts: 1,073	Re: found a project on C.L. Wheels and rear Attached Images __________________ 86 SWB 9.0 LITER T-400-OD 4.11 eaton-4/5 drop Best 1/4 12.51 @112mph no traction

09-06-2009, 06:57 PM	#3
KQQL IT At the body shop. Join Date: Aug 2009 Location: Land of fruits and nuts. Posts: 5,254	Re: found a project on C.L. Well? Dont be a tease.

09-06-2009, 08:12 PM	#4
PRUNEDA '87 Join Date: Jun 2004 Location: Katy, TX Posts: 632	Re: found a project on C.L. Awesome find, I'd guess about 400 bucks????

09-06-2009, 08:58 PM	#5
Number21 Registered User Join Date: Aug 2009 Location: Oregon Posts: 611	Re: found a project on C.L. Damn, the ones I haul home on a trailer are usually rusted out and falling apart.

09-06-2009, 10:06 PM	#6
AirMale Senior Member Join Date: Jan 2003 Location: Atlantic City, NJ Posts: 1,073	Re: found a project on C.L. I paid $900 his asking price. Reason= Weld 15X14 $255ea. 15X6 $200ea. MT 31X18.5/15 $250ea. front tires $100 ea. All NEW never used with lugs and centercaps adds up to..... $1600!!! That alone was my deciding factor __________________ 86 SWB 9.0 LITER T-400-OD 4.11 eaton-4/5 drop Best 1/4 12.51 @112mph no traction

09-06-2009, 10:16 PM	#7
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,021	Re: found a project on C.L. Sweet deal! You going to use it or sell it? I would sell the 15's and run a set of the M/T 20's. Those would rock your ride.... __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

09-06-2009, 10:23 PM	#8
AirMale Senior Member Join Date: Jan 2003 Location: Atlantic City, NJ Posts: 1,073	Re: found a project on C.L. I think I'm gonna build a leaf spring stepside pro-street. I'm curious about those caltracs. My 86 is waiting for a moser-60 and that will see 20X15's in the rear. Only so much $$$ to go around. I can probably build the stepside for less than $5-7k just for fun. __________________ 86 SWB 9.0 LITER T-400-OD 4.11 eaton-4/5 drop Best 1/4 12.51 @112mph no traction

09-07-2009, 01:43 AM	#10
KQQL IT At the body shop. Join Date: Aug 2009 Location: Land of fruits and nuts. Posts: 5,254	Re: found a project on C.L. cal tracs work! my pile went from 2.20s to 1.67 60 fts with the bars and tech help from them.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.