![]() |
|
![]() |
#1 |
Registered User
Join Date: Jul 2009
Location: Forest Grove, OR
Posts: 21
|
Door lock advise
I am needing some advise to make sure I am spending the money on the right part.
My problem is that the driver door locks but then unlocks when I try the handle, I put this down to excessive tumbler wear which causes the tumbler to move over the locking pin when I try the handle. So I am planning to replace the door latch assembly in a bid to fix this. Has anybody else had a similar problem? How did you resolve it? Thanks in advance ![]() |
![]() |
![]() |
![]() |
#2 |
The Older Generation
![]() ![]() ![]() Join Date: Aug 2006
Location: Montezuma, Iowa
Posts: 25,477
|
Re: Door lock advise
Are you locking the doors with the key?
Have you read this thread? http://67-72chevytrucks.com/vboard/s...d.php?t=361440 I don't quite understand your statement "which causes the tumbler to move over the locking pin when I try the handle". I don't think the latch is your problem, unless the notch that the locking pawl (the arm on the back of the lock cylinder) fits into is bent. I will try and get some pictures up later that shows all of the parts. LockDoc
__________________
Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 - Last edited by LockDoc; 09-08-2009 at 11:31 AM. |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Jul 2009
Location: Forest Grove, OR
Posts: 21
|
Re: Door lock advise
Yeah, I'm starting to think it may not be the latch assembly, although it is a little loose. Due to the fact that the the door locks when I turn the key (well the button goes down on the top of the door) and it is unlocked when I push the button on the handle.
I will take the door panel off in the next few days as I have a new set of GM locks from the PO, I may as well replace that lock and see what happens frome there. It may turn out that it is simply not locking due to a worn lock. Thanks for your help. ![]() |
![]() |
![]() |
![]() |
#4 |
Registered User
![]() Join Date: Jul 2007
Location: New River Arizona
Posts: 1,180
|
Re: Door lock advise
The door latch is probubly worn. You can remove it and either replace it. They are fairly plentiful on this site or I have repaired them by welding worn parts . also lube it well when you have it out.
|
![]() |
![]() |
![]() |
Bookmarks |
|
|