|
|
|
09-21-2009, 08:49 PM
|
#1 |
|
someday
 
Join Date: Dec 2001
Location: canastota,new york
Posts: 629
|
blazer project
I have had this blazer since 2002. its a 72 cst with factory tilt and a/c. It has been apart for 2 or 3 years and i'm finally gettting motivated and getting stuff done. I am currently filling and sanding the body to prep for paint. these two pics are what it looked like when i first got it.
__________________
Click Here to search ebay for all 67-72 parts My 72 CST blazer build 72 CST Blazer 4x4 67 2wd swb ( project onion crate ) 86 4x4 lwb plow truck 40 x 60 foot barn to work on all this stuff |
|
|
|
09-21-2009, 08:55 PM
|
#2 |
|
someday
Join Date: Dec 2001
Location: canastota,new york
Posts: 629
|
Re: blazer project
here is the frame before
__________________
Click Here to search ebay for all 67-72 parts My 72 CST blazer build 72 CST Blazer 4x4 67 2wd swb ( project onion crate ) 86 4x4 lwb plow truck 40 x 60 foot barn to work on all this stuff |
|
|
|
|
09-21-2009, 08:59 PM
|
#3 |
|
someday
Join Date: Dec 2001
Location: canastota,new york
Posts: 629
|
Re: blazer project
for some reason i dont have any pics of the process in between. I sandblasted, primed, and painted the frame cleaned the engine, trans, and transfer case and painted them. Added a poly tank, stainless brakelines, and some stainless hardware.
__________________
Click Here to search ebay for all 67-72 parts My 72 CST blazer build 72 CST Blazer 4x4 67 2wd swb ( project onion crate ) 86 4x4 lwb plow truck 40 x 60 foot barn to work on all this stuff |
|
|
|
|
09-21-2009, 09:02 PM
|
#4 |
|
someday
Join Date: Dec 2001
Location: canastota,new york
Posts: 629
|
Re: blazer project
now i am working on the tub. It was covered in this thick clay like dirt and undercoating on the bottom so i scraped it off with a scraper.
__________________
Click Here to search ebay for all 67-72 parts My 72 CST blazer build 72 CST Blazer 4x4 67 2wd swb ( project onion crate ) 86 4x4 lwb plow truck 40 x 60 foot barn to work on all this stuff |
|
|
|
|
09-21-2009, 09:04 PM
|
#5 |
|
someday
Join Date: Dec 2001
Location: canastota,new york
Posts: 629
|
Re: blazer project
next i sandblasted the whole thing.
__________________
Click Here to search ebay for all 67-72 parts My 72 CST blazer build 72 CST Blazer 4x4 67 2wd swb ( project onion crate ) 86 4x4 lwb plow truck 40 x 60 foot barn to work on all this stuff |
|
|
|
|
09-21-2009, 09:09 PM
|
#6 |
|
someday
Join Date: Dec 2001
Location: canastota,new york
Posts: 629
|
Re: blazer project
I replaced the inner rockers, front floor supports, lower a pillars, rockers, and front quarter panels. I also had to fabricate lower b pillars and repair that rocker box tie in brace thingy.
__________________
Click Here to search ebay for all 67-72 parts My 72 CST blazer build 72 CST Blazer 4x4 67 2wd swb ( project onion crate ) 86 4x4 lwb plow truck 40 x 60 foot barn to work on all this stuff |
|
|
|
|
09-21-2009, 10:07 PM
|
#7 |
|
Account Suspended
Join Date: Oct 2008
Location: Gulfport, Ms
Posts: 833
|
Re: blazer project
keep em coming
|
|
|
|
|
09-21-2009, 10:26 PM
|
#8 | |
|
Senior Member
Join Date: Jun 2007
Location: Pine Ridge Florida
Posts: 4,134
|
Re: blazer project
Quote:
|
|
|
|
|
|
09-22-2009, 06:11 PM
|
#9 |
|
someday
Join Date: Dec 2001
Location: canastota,new york
Posts: 629
|
Re: blazer project
I know everyone loves pics but i havent taken alot of them. I forgot this one of the bottom of the tub after paint. I will try to get more of the body work progress.
__________________
Click Here to search ebay for all 67-72 parts My 72 CST blazer build 72 CST Blazer 4x4 67 2wd swb ( project onion crate ) 86 4x4 lwb plow truck 40 x 60 foot barn to work on all this stuff |
|
|
|
|
03-19-2011, 11:50 AM
|
#10 | |
|
Registered User
Join Date: Feb 2003
Location: Damascus, OR
Posts: 260
|
Re: blazer project
Quote:
Your build is very impressive! I like it. What is going on in picture above though? I don't see your L supports? I love your tip setup there - and totally want to use it, but needs some more explanation please... Could you explain in short words (I'm slow today) what you mean about "blocks under the cross braces" - do you mean the cross braces at the door? So blocks between floor and door bracing?
__________________
-Ben 1972 CST K5 - Undergoing frame off, 8.1/4L80E/NP205, 3/4 ton, 8" lift, currently a pile of parts that when assembled resemble a Blazer 1972 K10 - Rust Bucket, TBD 1976 C10 SWB, 350 / T350 My blazer build thread: https://ck5.com/forums/builds/72-k5-...17-update.410/ Last edited by IGOR; 03-19-2011 at 11:53 AM. |
|
|
|
|
|
09-22-2009, 09:21 PM
|
#11 |
|
Junior Member
Join Date: Nov 2006
Location: Indiana
Posts: 181
|
Re: blazer project
Nice work. Keep the pics coming!
__________________
1967 Camaro (in pieces) 1972 Chevrolet K/5 Blazer 1969 Chevrolet K/5 Blazer 2000 Chevrolet K2500 Crew Cab 454 1999 Chevrolet Blazer 2008 Polaris Ranger XP Orange Crush 
|
|
|
|
|
08-29-2010, 06:55 PM
|
#12 |
|
someday
Join Date: Dec 2001
Location: canastota,new york
Posts: 629
|
Re: blazer project
still working on the blazer. I havent been good at keeping this up to date so i'll post up the few pictures i have taken.
I discover that inside the cowl area was more rotted that i originally thougt so i cut all the spot welds and did some repair. Also this water diversion channel was toast so i fabed up some new pieces and painted the whole thing while it was apart. I dont have any shots of it painted though(i tend to get working and forget pics)
__________________
Click Here to search ebay for all 67-72 parts My 72 CST blazer build 72 CST Blazer 4x4 67 2wd swb ( project onion crate ) 86 4x4 lwb plow truck 40 x 60 foot barn to work on all this stuff |
|
|
|
|
08-29-2010, 06:59 PM
|
#13 |
|
someday
Join Date: Dec 2001
Location: canastota,new york
Posts: 629
|
Re: blazer project
after the cowl was finished id assembled everthing. I had to do some mods to the new femder on the drivers side it didnt match the curve of the door. also i had to enlarge the holes in the radiator support and the grill because the holes did not line up with the repop fenders.
__________________
Click Here to search ebay for all 67-72 parts My 72 CST blazer build 72 CST Blazer 4x4 67 2wd swb ( project onion crate ) 86 4x4 lwb plow truck 40 x 60 foot barn to work on all this stuff |
|
|
|
|
08-29-2010, 07:01 PM
|
#14 |
|
someday
Join Date: Dec 2001
Location: canastota,new york
Posts: 629
|
Re: blazer project
I also sprayed al's liner on the inside of the tub. It went on easy and looks good.
__________________
Click Here to search ebay for all 67-72 parts My 72 CST blazer build 72 CST Blazer 4x4 67 2wd swb ( project onion crate ) 86 4x4 lwb plow truck 40 x 60 foot barn to work on all this stuff |
|
|
|
|
08-29-2010, 07:05 PM
|
#15 |
|
someday
Join Date: Dec 2001
Location: canastota,new york
Posts: 629
|
Re: blazer project
next i have to replace the inner door bottoms. on the first spot weld slip goes the cutter and now its gonna go real slow. I have a pic of the wound uncovered but its pretty ugly. I have to see and orthopedic this week hopefully everthing is good.
__________________
Click Here to search ebay for all 67-72 parts My 72 CST blazer build 72 CST Blazer 4x4 67 2wd swb ( project onion crate ) 86 4x4 lwb plow truck 40 x 60 foot barn to work on all this stuff Last edited by blue_69; 08-29-2010 at 07:06 PM. |
|
|
|
|
09-23-2010, 09:35 PM
|
#16 |
|
Grandpa in the rustmobile...
Join Date: Nov 2008
Location: Spokane WA/Viola TN
Posts: 11,422
|
Re: blazer project
wow man looks good that may look like a little work to some but thats WORK!
keep at it hang in there your really comming along!
__________________
John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4 |
|
|
|
|
09-24-2010, 07:19 AM
|
#17 |
|
Registered User
Join Date: Apr 2008
Location: Angleton, TX
Posts: 2,219
|
Re: blazer project
It's starting to shape up! Can't wait to see more.
__________________
I don't always drive trucks; but when I do I prefer Chevy's. Stay driving my friends. '72 blazer 2wd build 67-72 Factory Big Block Registry |
|
|
|
|
09-24-2010, 10:02 AM
|
#18 |
|
Registered User
Join Date: Nov 2008
Location: Glenville, Pa
Posts: 445
|
Re: blazer project
Going to be a sweet blazer! Keep it up!
__________________
http://67-72chevytrucks.com/vboard/s...d.php?t=355153 |
|
|
|
|
09-24-2010, 10:42 AM
|
#19 |
|
Registered User
Join Date: Sep 2010
Location: Conway, AR
Posts: 10
|
Re: blazer project
What are you doing to prevent damage to the body panels when you tip the body on it's side to work on the undercarriage? Seems like a good way to get access if it doesn't do the body panels harm.
Good looking truck and good progress! |
|
|
|
|
09-24-2010, 06:54 PM
|
#20 |
|
someday
Join Date: Dec 2001
Location: canastota,new york
Posts: 629
|
Re: blazer project
Wanderlusty: I got the idea from a pic i saw one here. Its so simple and works great its just 2 peices of box tubing welded in a "L" shape with some exhaust tubing welded to the top to even out the spacing between the dolly's and the tub. I used a cherry picker to tip it up and put a strap on top to make sure it didnt tip to fast once it got over the center of gravity. I'll try to remember to get better pics for ya but they are on the tub in this pic also you can see the nylon strap on the top.
__________________
Click Here to search ebay for all 67-72 parts My 72 CST blazer build 72 CST Blazer 4x4 67 2wd swb ( project onion crate ) 86 4x4 lwb plow truck 40 x 60 foot barn to work on all this stuff |
|
|
|
|
10-23-2010, 10:37 AM
|
#21 |
|
2WD Jimmy
Join Date: Mar 2005
Location: Davis County, Utah
Posts: 2,565
|
Re: blazer project
Awesome.
|
|
|
|
|
03-10-2011, 01:55 AM
|
#22 |
|
Registered User
Join Date: Jul 2009
Location: Covington, Ga
Posts: 55
|
Re: blazer project
any updates awesome start
|
|
|
|
|
03-10-2011, 06:00 PM
|
#23 |
|
someday
Join Date: Dec 2001
Location: canastota,new york
Posts: 629
|
Re: blazer project
Not really any updates its been to cold and my spending cash is being eaten up heating my house. I did manage to get the exhaust built but did'nt take pics yet.
__________________
Click Here to search ebay for all 67-72 parts My 72 CST blazer build 72 CST Blazer 4x4 67 2wd swb ( project onion crate ) 86 4x4 lwb plow truck 40 x 60 foot barn to work on all this stuff |
|
|
|
|
05-05-2011, 09:15 PM
|
#24 |
|
someday
Join Date: Dec 2001
Location: canastota,new york
Posts: 629
|
Re: blazer project
put the windshield in and also started the soundproofing on the firewall. I'm waiting for my firewall pad set to come in so i can install the wiring, heater/AC parts, parking brake pedal, dashpad, glove box, and gauges. I gotta remember to take pics of the exhaust that is done except for some turndowns.
__________________
Click Here to search ebay for all 67-72 parts My 72 CST blazer build 72 CST Blazer 4x4 67 2wd swb ( project onion crate ) 86 4x4 lwb plow truck 40 x 60 foot barn to work on all this stuff |
|
|
|
|
05-31-2011, 11:18 AM
|
#25 |
|
someday
Join Date: Dec 2001
Location: canastota,new york
Posts: 629
|
Re: blazer project
I have been working on the blazer a lot lately. I took a bunch of pics the other day and i'm going to catch up the build thread over the next couple days.
here are some pics of the exhaust, what you can see of it at least. I used the newer style hanger because i like the clean look.
__________________
Click Here to search ebay for all 67-72 parts My 72 CST blazer build 72 CST Blazer 4x4 67 2wd swb ( project onion crate ) 86 4x4 lwb plow truck 40 x 60 foot barn to work on all this stuff |
|
|
|
 |
| Bookmarks |
|
|
Hybrid Mode
