possible 1962 Extended cab project? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

61TWUK · 09-29-2009, 05:43 PM

Ok like I have previously stated in another thread.. I'm looking to purchase a 1962 Extended cab project. My question is how much do yal think its going to take? Again its a working project still needs some work....

61TWUK · 09-29-2009, 05:45 PM

inside pics

61TWUK · 09-29-2009, 05:46 PM

it has a late 90's ext cab frame that goes with it...

61TWUK · 09-29-2009, 07:31 PM

Driver's and pass extended door

Dinos63 · 09-29-2009, 07:42 PM

Gooood start, what he want for it?,

joe231 · 09-29-2009, 07:41 PM

Are you asking how much it will take to complete?
That is going to be very subjective

if you are asking what it is worth in its current state.... You need to be a supporting member to post a WIW

61TWUK · 09-29-2009, 07:45 PM

Quote:

Originally Posted by joe231

if you are asking what it is worth in its current state.... You need to be a supporting member to post a WIW

Yea I've been meaning to do that for awhile now... hold on...

61TWUK · 09-29-2009, 07:52 PM

K there now WIW... haha

61TWUK · 09-29-2009, 08:06 PM

Dino... PM sent.

joe231 · 09-29-2009, 08:09 PM

Quote:

Originally Posted by 61TWUK

Dino... PM sent.

please share

personally I would tell them to keep the 90 frame and use an older frame.
That being said, I wouldn't give more than $1000 for it all and less depending on the shape of all the sheet metal. You have to figure out if that will get you ahead. Were the cabs joined properly or are you going to have to rework it?

61TWUK · 09-29-2009, 10:39 PM

Quote:

Originally Posted by joe231

please share

personally I would tell them to keep the 90 frame and use an older frame.
That being said, I wouldn't give more than $1000 for it all and less depending on the shape of all the sheet metal. You have to figure out if that will get you ahead. Were the cabs joined properly or are you going to have to rework it?

Joe I sent you a PM also...

Joemomma1 · 09-29-2009, 11:05 PM

Cant say Id pay much for that piece. Joe is very generous to offer a G for it.

joe231 · 09-29-2009, 11:27 PM

you are probably right

joe231 · 09-29-2009, 11:28 PM

the more I look at it the more I see that is wrong. the floor looks awful (probably needs to be ripped out and done right or it will be a rust bucket in a few years, there isn't any rear rockers, the roof is gonna be a pain......I'm not saying it can't be done.....just that it still needs lots of work

**Bugeyev8** · 09-30-2009, 03:11 AM

looks like a crude job and a long given up on project, I would not mess with it for any cost, if iit was done wrong..there may not be much left when you try to repair it, I think you would be better off getting 2 fresh cabs and start from scratch

61TWUK · 10-07-2009, 03:11 PM

well i went and saw this truck in person... its a starter project.... for someone I might pass on it...

On a side note these guys have a TON of stuff: trucks, hoods, fenders.... they have subs, crew cabs, bbw's, sbw's, fleetsides, and steps man like i said before you think you might need it they probably have it...

**Clyde65** · 10-07-2009, 03:15 PM

Arent they in East Texas? I heard they wont part with the CC's

61TWUK · 10-07-2009, 03:29 PM

Quote:

Originally Posted by Clyde65

Arent they in East Texas? I heard they wont part with the CC's

They are in a little town named Leonard TX, and yes they won't part with the Crew cabs .... but I thought I would share...

kdrodworks316 · 08-15-2010, 12:30 AM

WOW! After seeing these pics, I'm really glad I didnt buy that thing, then drive 1700 miles to find a giant mess, then drive home without it. I've bought that thing 4 times and had the deal go south in one way or another everytime, blessing in disquise.

09-29-2009, 05:43 PM	#1
61TWUK Registered User Join Date: May 2009 Location: Charleston SC Posts: 290	possible 1962 Extended cab project? Ok like I have previously stated in another thread.. I'm looking to purchase a 1962 Extended cab project. My question is how much do yal think its going to take? Again its a working project still needs some work.... Attached Images __________________ 1961 Apache SWB/SBW for now... Built 327 You need two tools in life: duct tape and WD-40. If it moves and it shouldn't, you use duct tape. If it doesn't move and it should, you use WD-40.

09-29-2009, 05:45 PM	#2
61TWUK Registered User Join Date: May 2009 Location: Charleston SC Posts: 290	Re: possible 1962 Extended cab project? inside pics Attached Images __________________ 1961 Apache SWB/SBW for now... Built 327 You need two tools in life: duct tape and WD-40. If it moves and it shouldn't, you use duct tape. If it doesn't move and it should, you use WD-40.

09-29-2009, 05:46 PM	#3
61TWUK Registered User Join Date: May 2009 Location: Charleston SC Posts: 290	Re: possible 1962 Extended cab project? it has a late 90's ext cab frame that goes with it... __________________ 1961 Apache SWB/SBW for now... Built 327 You need two tools in life: duct tape and WD-40. If it moves and it shouldn't, you use duct tape. If it doesn't move and it should, you use WD-40. Last edited by 61TWUK; 09-29-2009 at 05:51 PM.

09-29-2009, 07:31 PM	#4
61TWUK Registered User Join Date: May 2009 Location: Charleston SC Posts: 290	Re: possible 1962 Extended cab project? Driver's and pass extended door Attached Images __________________ 1961 Apache SWB/SBW for now... Built 327 You need two tools in life: duct tape and WD-40. If it moves and it shouldn't, you use duct tape. If it doesn't move and it should, you use WD-40.

09-29-2009, 07:42 PM	#5
Dinos63 chevy only Join Date: Sep 2006 Location: Phoenix, AZ Posts: 6,619	Re: possible 1962 Extended cab project? Gooood start, what he want for it?, __________________ CHEVY ONLY... Nothin Else !

09-29-2009, 07:41 PM	#6
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: possible 1962 Extended cab project? Are you asking how much it will take to complete? That is going to be very subjective if you are asking what it is worth in its current state.... You need to be a supporting member to post a WIW __________________ *CHEVY ONLY*

09-29-2009, 07:52 PM	#8
61TWUK Registered User Join Date: May 2009 Location: Charleston SC Posts: 290	Re: possible 1962 Extended cab project? K there now WIW... haha __________________ 1961 Apache SWB/SBW for now... Built 327 You need two tools in life: duct tape and WD-40. If it moves and it shouldn't, you use duct tape. If it doesn't move and it should, you use WD-40.

09-29-2009, 08:06 PM	#9
61TWUK Registered User Join Date: May 2009 Location: Charleston SC Posts: 290	Re: possible 1962 Extended cab project? Dino... PM sent. __________________ 1961 Apache SWB/SBW for now... Built 327 You need two tools in life: duct tape and WD-40. If it moves and it shouldn't, you use duct tape. If it doesn't move and it should, you use WD-40.

09-29-2009, 11:05 PM	#12
Joemomma1 Registered User Join Date: Mar 2009 Location: CA Posts: 814	Re: possible 1962 Extended cab project? Cant say Id pay much for that piece. Joe is very generous to offer a G for it.

09-29-2009, 11:27 PM	#13
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: possible 1962 Extended cab project? you are probably right __________________ *CHEVY ONLY*

09-29-2009, 11:28 PM	#14
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: possible 1962 Extended cab project? the more I look at it the more I see that is wrong. the floor looks awful (probably needs to be ripped out and done right or it will be a rust bucket in a few years, there isn't any rear rockers, the roof is gonna be a pain......I'm not saying it can't be done.....just that it still needs *lots* of work __________________ *CHEVY ONLY* Last edited by joe231; 09-29-2009 at 11:35 PM.

09-30-2009, 03:11 AM	#15
Bugeyev8 Senior Member Join Date: Aug 2009 Location: San Leandro, Ca 94577 Posts: 854	Re: possible 1962 Extended cab project? looks like a crude job and a long given up on project, I would not mess with it for any cost, if iit was done wrong..there may not be much left when you try to repair it, I think you would be better off getting 2 fresh cabs and start from scratch

10-07-2009, 03:11 PM	#16
61TWUK Registered User Join Date: May 2009 Location: Charleston SC Posts: 290	Re: possible 1962 Extended cab project? well i went and saw this truck in person... its a starter project.... for someone I might pass on it... On a side note these guys have a TON of stuff: trucks, hoods, fenders.... they have subs, crew cabs, bbw's, sbw's, fleetsides, and steps man like i said before you think you might need it they probably have it... __________________ 1961 Apache SWB/SBW for now... Built 327 You need two tools in life: duct tape and WD-40. If it moves and it shouldn't, you use duct tape. If it doesn't move and it should, you use WD-40.

10-07-2009, 03:15 PM	#17
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,546	Re: possible 1962 Extended cab project? Arent they in East Texas? I heard they wont part with the CC's

08-15-2010, 12:30 AM	#19
kdrodworks316 KOFFIN DRAGGER Join Date: Jan 2008 Location: st.anthony Idaho Posts: 864	Re: possible 1962 Extended cab project? WOW! After seeing these pics, I'm really glad I didnt buy that thing, then drive 1700 miles to find a giant mess, then drive home without it. I've bought that thing 4 times and had the deal go south in one way or another everytime, blessing in disquise. __________________ If the life I live dont kill me, then I guess I'll never die! New updated stuff at www.kdrodworks.com My site still needs help, web guys and gals pm me. the best guys in the whole world: sweet70beast, jonzcustomshop, runninlow, captainfab, and the one I havent met yet, joe231



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.