making a diecast model of my blazer - The 1947 - Present Chevrolet & GMC Truck Message Board Network

chevy2racr · 09-29-2009, 06:05 PM

hope it turns out took a jada toys truck, got a long ways to go but....

Thealien · 09-29-2009, 06:47 PM

That first pic is cool, you can see the windshield for size comparison.

**FRENCHBLUE72** · 09-30-2009, 02:42 PM

Keep us posted..

bouncytruck · 09-30-2009, 03:41 PM

Cool. Did you start with a diecast truck? I've modified 3 "Wix" blazers to look like two of my 4wds and one is in the process to look like a slammed 2wd. I didn't do any body mods to the 4wds, just paint. One I did put suspension and tires from an old Dodge PU model I built as a kid. On the 2wd, I've slammed it and stalled out while shaving the body moldings and door handles.

chevy2racr · 09-30-2009, 07:08 PM

started with one of the Jada die cast 72 cheyenne

chevy2racr · 09-30-2009, 07:10 PM

this is the right size now more or less to mount on my so real blazer chassis that i got on ebay with truxus swampers on it

09-29-2009, 06:05 PM	#1
chevy2racr So Many Ideas, So Little Money Join Date: Sep 2001 Location: Marshalltown, IA Posts: 1,610	making a diecast model of my blazer hope it turns out took a jada toys truck, got a long ways to go but.... Attached Images __________________ 72 Blazer 3/4 ton running gear 4.10s NP205/TH350 350 4in lift half doors 71 C10 with 454 99 S-10 5.1L SBC 700R4 09 Malibu Marshalltown, Iowa

09-29-2009, 06:47 PM	#2
Thealien Senior Member Join Date: Jun 2007 Location: Pine Ridge Florida Posts: 4,125	Re: making a diecast model of my blazer That first pic is cool, you can see the windshield for size comparison.

09-30-2009, 02:42 PM	#3
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	Re: making a diecast model of my blazer Keep us posted.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

09-30-2009, 03:41 PM	#4
bouncytruck SKINNY TIRES RULE! Join Date: Sep 2001 Location: Bothell, WA Posts: 11,049	Re: making a diecast model of my blazer Cool. Did you start with a diecast truck? I've modified 3 "Wix" blazers to look like two of my 4wds and one is in the process to look like a slammed 2wd. I didn't do any body mods to the 4wds, just paint. One I did put suspension and tires from an old Dodge PU model I built as a kid. On the 2wd, I've slammed it and stalled out while shaving the body moldings and door handles. __________________ bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L

09-30-2009, 07:08 PM	#5
chevy2racr So Many Ideas, So Little Money Join Date: Sep 2001 Location: Marshalltown, IA Posts: 1,610	Re: making a diecast model of my blazer started with one of the Jada die cast 72 cheyenne __________________ 72 Blazer 3/4 ton running gear 4.10s NP205/TH350 350 4in lift half doors 71 C10 with 454 99 S-10 5.1L SBC 700R4 09 Malibu Marshalltown, Iowa

09-30-2009, 07:10 PM	#6
chevy2racr So Many Ideas, So Little Money Join Date: Sep 2001 Location: Marshalltown, IA Posts: 1,610	Re: making a diecast model of my blazer this is the right size now more or less to mount on my so real blazer chassis that i got on ebay with truxus swampers on it __________________ 72 Blazer 3/4 ton running gear 4.10s NP205/TH350 350 4in lift half doors 71 C10 with 454 99 S-10 5.1L SBC 700R4 09 Malibu Marshalltown, Iowa



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.