TN 60-62 Auto Trans Mount & Drive Shaft Wanted - The 1947 - Present Chevrolet & GMC Truck Message Board Network

imareiver · 09-30-2009, 11:47 AM

I need a crossmember from a 60-62 Chevy pickup which came with a powerglide. It bolts in to the X frame with 3 bolts on each end. A drive shaft from same vehicle would be great! Thanks

**DPowers** · 09-30-2009, 09:38 PM

RU keeping the powerglide or switching to something different?

imareiver · 10-01-2009, 05:34 AM

Quote:

Originally Posted by DPowers

RU keeping the powerglide or switching to something different?

My truck came with a standard transmission, thus no auto crossmember. If I get the drive shaft from someone else's truck that had a powerglide, I'll probably put in a 350 Turbo of the same length just for convenience. If not, I'll probably go with a 700r4 and have a drive shaft made up. Either way, I'm doing away with the standard trans and going with a late model automatic. So, I mainly need the crossmember! Any suggestions are appreciated.

**DPowers** · 10-01-2009, 02:45 PM

Try here for some good info.
http://persh.org/Pickup/IdeaPage.htm

imareiver · 10-01-2009, 06:42 PM

Thanks D! I checked it out and it is great info! TT

**DPowers** · 10-01-2009, 09:53 PM

Which College Grove are you in?

**DPowers** · 10-01-2009, 09:57 PM

You should also check us out over here...
http://tennesseeclassictruckclub.com\

imareiver · 10-02-2009, 03:14 PM

South of Nashville between Franklin and Murfreesboro. Where are you located? TT

**DPowers** · 10-09-2009, 09:21 PM

I am over to the east- about 35 mile east of Knoxville. 1/2 an hour from Gatlinburg. WE got several guys from the TNCTC board in your neighborhood.

ol Curt · 10-15-2009, 09:22 PM

I have a crossmember (chrome) that I was going to use in my 66 that I would let go cheap. Not sure if it fits your year or not, but it is for TH350.

**DPowers** · 10-16-2009, 07:42 PM

what is cheap?

ol Curt · 10-16-2009, 09:46 PM

$50 plus the freight. I'm going to Memphis the first weekend in December if that would help on the freight part.

**DPowers** · 10-16-2009, 11:45 PM

PM returned

09-30-2009, 11:47 AM	#1
imareiver Registered User Join Date: Aug 2009 Location: College Grove, TN Posts: 6	60-62 Auto Trans Mount & Drive Shaft Wanted I need a crossmember from a 60-62 Chevy pickup which came with a powerglide. It bolts in to the X frame with 3 bolts on each end. A drive shaft from same vehicle would be great! Thanks

09-30-2009, 09:38 PM	#2
DPowers One foot in front of the other Join Date: Aug 2008 Location: Parrottsville, TN Posts: 5,446	Re: 60-62 Auto Trans Mount & Drive Shaft Wanted RU keeping the powerglide or switching to something different?

10-01-2009, 02:45 PM	#4
DPowers One foot in front of the other Join Date: Aug 2008 Location: Parrottsville, TN Posts: 5,446	Re: 60-62 Auto Trans Mount & Drive Shaft Wanted Try here for some good info. http://persh.org/Pickup/IdeaPage.htm

10-01-2009, 06:42 PM	#5
imareiver Registered User Join Date: Aug 2009 Location: College Grove, TN Posts: 6	Re: 60-62 Auto Trans Mount & Drive Shaft Wanted Thanks D! I checked it out and it is great info! TT

10-01-2009, 09:53 PM	#6
DPowers One foot in front of the other Join Date: Aug 2008 Location: Parrottsville, TN Posts: 5,446	Re: 60-62 Auto Trans Mount & Drive Shaft Wanted Which College Grove are you in?

10-01-2009, 09:57 PM	#7
DPowers One foot in front of the other Join Date: Aug 2008 Location: Parrottsville, TN Posts: 5,446	Re: 60-62 Auto Trans Mount & Drive Shaft Wanted You should also check us out over here... http://tennesseeclassictruckclub.com\

10-02-2009, 03:14 PM	#8
imareiver Registered User Join Date: Aug 2009 Location: College Grove, TN Posts: 6	Re: 60-62 Auto Trans Mount & Drive Shaft Wanted South of Nashville between Franklin and Murfreesboro. Where are you located? TT Last edited by imareiver; 10-02-2009 at 03:21 PM.

10-09-2009, 09:21 PM	#9
DPowers One foot in front of the other Join Date: Aug 2008 Location: Parrottsville, TN Posts: 5,446	Re: 60-62 Auto Trans Mount & Drive Shaft Wanted I am over to the east- about 35 mile east of Knoxville. 1/2 an hour from Gatlinburg. WE got several guys from the TNCTC board in your neighborhood.

10-15-2009, 09:22 PM	#10
ol Curt Junior Member Join Date: Dec 2006 Location: Newburgh, IN Posts: 1,247	Re: 60-62 Auto Trans Mount & Drive Shaft Wanted I have a crossmember (chrome) that I was going to use in my 66 that I would let go cheap. Not sure if it fits your year or not, but it is for TH350. __________________ 1966 Chevy C10 Longbed I'm Bob....ol Curt was my Grandpa The truck was his and he sure as heck wouldn't understand why I took a perfectly good truck and tore it down!

10-16-2009, 07:42 PM	#11
DPowers One foot in front of the other Join Date: Aug 2008 Location: Parrottsville, TN Posts: 5,446	Re: 60-62 Auto Trans Mount & Drive Shaft Wanted what is cheap?

10-16-2009, 09:46 PM	#12
ol Curt Junior Member Join Date: Dec 2006 Location: Newburgh, IN Posts: 1,247	Re: 60-62 Auto Trans Mount & Drive Shaft Wanted $50 plus the freight. I'm going to Memphis the first weekend in December if that would help on the freight part. __________________ 1966 Chevy C10 Longbed I'm Bob....ol Curt was my Grandpa The truck was his and he sure as heck wouldn't understand why I took a perfectly good truck and tore it down! Last edited by ol Curt; 10-16-2009 at 09:50 PM.

10-16-2009, 11:45 PM	#13
DPowers One foot in front of the other Join Date: Aug 2008 Location: Parrottsville, TN Posts: 5,446	Re: 60-62 Auto Trans Mount & Drive Shaft Wanted PM returned



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.