new product - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jb4short · 10-05-2009, 04:21 PM

bluesfella · 10-05-2009, 04:26 PM

That is AWESOME! I have two un-usable hoods that are perfect everywhere except this area I thought I was just going to have to junk. How much is it?

jb4short · 10-05-2009, 04:32 PM

Quote:

Originally Posted by bluesfella

That is AWESOME! I have two un-usable hoods that are perfect everywhere except this area I thought I was just going to have to junk. How much is it?

working on pricing now....parts are in stock

joe231 · 10-05-2009, 05:00 PM

any word on fleet bedsides?
I heard some gossip last year that there should be some being re-popped soon?

jb4short · 10-05-2009, 05:12 PM

Quote:

Originally Posted by joe231

any word on fleet bedsides?
I heard some gossip last year that there should be some being re-popped soon?

not that I'm aware of

fleetsidelarry · 10-05-2009, 05:16 PM

Cool! You'll sell every one you make, is my guess.

daverod · 10-05-2009, 05:24 PM

Now if you could make some 8' fleetside bedsides you would be doing somthing.

It would be nice. Think about it I'll buy the first ones.

daverod · 10-05-2009, 05:28 PM

Quote:

Originally Posted by Tri-ProAutomotive

not that I'm aware of

terd ferguson · 10-05-2009, 05:39 PM

It's about time. I can't figure out why no one made one already. The hood fronts are ALWAYS rusted. Good hoods are few and far between (and expensive). I'm sure you'll sell a ton of these.

Thanks for taking care of a real need instead of repopping something everybody else already does. Now, how about a roof with windshield pinch weld and big back window?

***EDITED TO ADD***
I've also heard a lot of complaints about the under hood braces. Once they rust out, the hood gets flimsy. That may be another patch to look into making. Food for thought.

70 Suburban · 10-06-2009, 09:59 AM

Need a price

jb4short · 10-06-2009, 10:28 AM

219.95

MacAttack · 10-06-2009, 12:02 PM

Quote:

Originally Posted by Tri-ProAutomotive

219.95

For what it is and the kind of POS you'd create (more-than-likely) trying to fab the same in your garage (excluding Alan, of course), that's a reasonable price.

Mac.

jb4short · 10-06-2009, 12:07 PM

Quote:

Originally Posted by MacAttack

For what it is and the kind of POS you'd create (more-than-likely) trying to fab the same in your garage (excluding Alan, of course), that's a reasonable price.

Mac.

thank you-

joe231 · 10-06-2009, 10:36 AM

joe231 · 10-06-2009, 02:03 PM

Sorry
I wasn't saying it isn't worth it, I was portraying my sticker shock....didn't mean anything by it....
If you need one, and can't find an OEM piece, this is certainly the way to go

jb4short · 10-06-2009, 02:28 PM

Quote:

Originally Posted by joe231

Sorry
I wasn't saying it isn't worth it, I was portraying my sticker shock....didn't mean anything by it....
If you need one, and can't find an OEM piece, this is certainly the way to go

don't worry...LOL

MacAttack · 10-06-2009, 03:35 PM

Run the numbers backwards Joe. At $35.00 per hour - could you or anyone you know fabricate that piece in 6.28 hours?

Byronic · 10-06-2009, 04:02 PM

Subscribed. How hard would it be to install? Maybe a video.

mbgmike · 10-06-2009, 06:22 PM

We already have it listed on our site

http://www.bumpandgrindgarage.com/NE...TAL_PARTS.html

Thanks to Jon

mbgmike · 10-06-2009, 06:23 PM

Quote:

Originally Posted by Byronic

Subscribed. How hard would it be to install? Maybe a video.

Send us a hood and we will do one for free

*LILRED66* · 10-06-2009, 06:39 PM

Nice item...I would like to see the recommended installation method of this piece, since it has blind spot-welds on the ends.

mbgmike · 10-06-2009, 06:56 PM

Quote:

Originally Posted by LILRED66

Nice item...I would like to see the recommended installation method of this piece, since it has blind spot-welds on the ends.

You need a blind Welder. I only have one eye left working so I could get it 50% corect

Sorry

I don't think you will find a recommended installation anywhere. But I guess someone may have some old info. It can be done

jb4short · 10-06-2009, 07:50 PM

I looked seriously at these...you need a blind welder......OR use panel epoxy adheasive. I think it would make a better repair anyway

*LILRED66* · 10-07-2009, 12:23 AM

I just went through several '62-'66 Chevy truck hoods at my shop, stripping them to shells. I think I will disassemble the nose on one and experiment with this patch panel. I would like to see firsthand how they go together and what the quality, fit and finish is.

63sbssbbw · 10-07-2009, 05:31 AM

Any plans for a GMC version??
T

10-05-2009, 04:21 PM	#1
jb4short Damn Yankee Join Date: Feb 2007 Location: Lynchburg, VA Posts: 2,261	new product

10-05-2009, 04:26 PM	#2
bluesfella Registered User Join Date: Oct 2008 Location: Tallahassee, FL Posts: 53	Re: new product That is AWESOME! I have two un-usable hoods that are perfect everywhere except this area I thought I was just going to have to junk. How much is it? __________________ www.vancerutherford.com

10-05-2009, 05:00 PM	#4
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: new product any word on fleet bedsides? I heard some gossip last year that there should be some being re-popped soon? __________________ *CHEVY ONLY*

10-05-2009, 05:16 PM	#6
fleetsidelarry Senior Car Nut Join Date: Jan 2008 Location: shellman bluff, GA Posts: 1,411	Re: new product Cool! You'll sell every one you make, is my guess. __________________ Larry

10-05-2009, 05:24 PM	#7
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: new product Now if you could make some 8' fleetside bedsides you would be doing somthing. It would be nice. Think about it I'll buy the first ones. __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it"

10-05-2009, 05:39 PM	#9
terd ferguson Registered User Join Date: Mar 2009 Location: Concord, NC Posts: 531	Re: new product It's about time. I can't figure out why no one made one already. The hood fronts are ALWAYS rusted. Good hoods are few and far between (and expensive). I'm sure you'll sell a ton of these. Thanks for taking care of a real need instead of repopping something everybody else already does. Now, how about a roof with windshield pinch weld and big back window? *EDITED TO ADD* I've also heard a lot of complaints about the under hood braces. Once they rust out, the hood gets flimsy. That may be another patch to look into making. Food for thought. __________________ "I never apologize. I'm sorry, but that's just the way I am." - Homer J. Simpson 1955 2nd Series Chevy "King Of Trucks" Last edited by terd ferguson; 10-05-2009 at 05:41 PM.

10-06-2009, 09:59 AM	#10
70 Suburban Rods Join Date: Nov 2002 Location: Bryan, TX Posts: 1,398	Re: new product Need a price __________________ Just keepin it simple. 1965 C-10 Ext cab build. 350??(Does it count at 2 truck if I had to cut one up?) 1966 C-10 lwb 283 auto 1970 Suburban in pieces 1971 Blazer 4wd....restore someday. all factory CST 1972 Blazer 4wd parts truck still a roller 1972 GMC Sierra Grandee 1998 Chevy ext driver. 2005 F**D the wife drive...(cant fix women)

10-06-2009, 10:28 AM	#11
jb4short Damn Yankee Join Date: Feb 2007 Location: Lynchburg, VA Posts: 2,261	Re: new product 219.95

10-06-2009, 10:36 AM	#14
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: new product __________________ *CHEVY ONLY* Last edited by joe231; 10-06-2009 at 10:37 AM.

10-06-2009, 02:03 PM	#15
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: new product Sorry I wasn't saying it isn't worth it, I was portraying my sticker shock....didn't mean anything by it.... If you need one, and can't find an OEM piece, this is certainly the way to go __________________ *CHEVY ONLY*

10-06-2009, 03:35 PM	#17
MacAttack 283 Drama Queen Join Date: Dec 2004 Location: Surf City, CA Posts: 2,435	Re: new product Run the numbers backwards Joe. At $35.00 per hour - could you or anyone you know fabricate that piece in 6.28 hours? __________________ For about 12 years of my adult life I had a severe speech impediment. My ex-wife never let me get a word in edgewise.

10-06-2009, 04:02 PM	#18
Byronic The Beach Cruiser Join Date: May 2009 Location: Panama City, Florida Posts: 358	Re: new product Subscribed. How hard would it be to install? Maybe a video. __________________ 1999 Silverado DD 1966 Panel Truck 2003 Harley Road Glide 1967 Schwinn Tandem Single Speed

10-06-2009, 06:22 PM	#19
mbgmike Registered User Join Date: Aug 2005 Location: Pasadena,Tx /Pto Pta DR Posts: 5,415	Re: new product We already have it listed on our site http://www.bumpandgrindgarage.com/NE...TAL_PARTS.html Thanks to Jon

10-06-2009, 06:39 PM	#21
LILRED66 Account Suspended Join Date: May 2005 Location: Kansas City, KS Posts: 3,906	Re: new product Nice item...I would like to see the recommended installation method of this piece, since it has blind spot-welds on the ends.

10-06-2009, 07:50 PM	#23
jb4short Damn Yankee Join Date: Feb 2007 Location: Lynchburg, VA Posts: 2,261	Re: new product I looked seriously at these...you need a blind welder......OR use panel epoxy adheasive. I think it would make a better repair anyway



Register or Log In To remove these advertisements.

10-07-2009, 12:23 AM	#24
LILRED66 Account Suspended Join Date: May 2005 Location: Kansas City, KS Posts: 3,906	Re: new product I just went through several '62-'66 Chevy truck hoods at my shop, stripping them to shells. I think I will disassemble the nose on one and experiment with this patch panel. I would like to see firsthand how they go together and what the quality, fit and finish is. Last edited by LILRED66; 10-07-2009 at 12:24 AM.

10-07-2009, 05:31 AM	#25
63sbssbbw UCA63 Join Date: Aug 2005 Location: Lloydminster AB Can. Posts: 1,637	Re: new product Any plans for a GMC version?? T __________________ member#7816 "63 sb ss bbw 350\350 12 bolt rear Pwr Fr Disc PS tilt '61 GMC in progress '63 GMC to use for parts '90 Chevy Ext cab sbfs 5.7l (current d d)

Register or Log In To remove these advertisements.