core support question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

kacz81 · 10-14-2009, 08:22 PM

Hey guys bought a 72 c10 last year that was in pieces i'm currently dropping my motor back in it and not sure which way the core support mount bushings go bought a new set from brothers came with 2 cone shape 2 dounghnut shape i don't know which is top/bottom up/down any help/pics would be greatly appreciated thanks kacz81

Tx Firefighter · 10-14-2009, 08:48 PM

The flat hockey puck ones go on top of the frame mount. There is a shoulder on one side of them that fits down into the hole on the frame. The cone shaped ones go under the mount bracket. There should be a metal bushing/ spacer that goes through the middle of it all. Drop the bolt in from the top. Nut on bottom.

10-14-2009, 08:22 PM	#1
kacz81 Registered User Join Date: Jul 2009 Location: Shorewood,IL. Posts: 75	core support question Hey guys bought a 72 c10 last year that was in pieces i'm currently dropping my motor back in it and not sure which way the core support mount bushings go bought a new set from brothers came with 2 cone shape 2 dounghnut shape i don't know which is top/bottom up/down any help/pics would be greatly appreciated thanks kacz81

10-14-2009, 08:48 PM	#2
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Re: core support question The flat hockey puck ones go on top of the frame mount. There is a shoulder on one side of them that fits down into the hole on the frame. The cone shaped ones go under the mount bracket. There should be a metal bushing/ spacer that goes through the middle of it all. Drop the bolt in from the top. Nut on bottom. __________________ I'm on the Instagram- @Gearhead_Kevin



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.