Can anyone tell me how to make these? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Sillyoldman · 10-17-2009, 03:52 PM

I can't afford the plans

http://cgi.ebay.com/ebaymotors/Car-R...motiveQ5fTools

cdowns · 10-17-2009, 04:09 PM

i used to do stuff like that in preschool

71swb4x4 · 10-17-2009, 05:08 PM

Quote:

Originally Posted by cdowns

i used to do stuff like that in preschool

I bet you had to be careful or the horse would pull the wagon right off the end of the ramp.

chevyboy55 · 10-17-2009, 06:21 PM

I wish you could see if anyone actually bought any.

cableguy0 · 10-17-2009, 06:48 PM

If you look at the feedback he sold at least 1.

Sillyoldman · 10-17-2009, 06:51 PM

Quote:

Originally Posted by chevyboy55

I wish you could see if anyone actually bought any.

Me too. I am actually looking for some steel stands with removable ramps. My dad had them. You drive up them and remove the ramp portion which allows more side access. I came accross this. I think it's cool. The concept is good, but I'd build it a little different though.

http://www.corvettec3.ca/ramps.htm

big_al_71 · 10-17-2009, 07:01 PM

I dont know if I would go under the car with anything made out of wood, thats just me...great concept I would make them out of steel...

68C15 · 10-18-2009, 07:10 AM

Quote:

Originally Posted by 71swb4x4

I bet you had to be careful or the horse would pull the wagon right off the end of the ramp.

good one Shawn

I have a better idea, not exactly cheaper or faster though. get an education in auto repair. spend over $40K in tools. get a job at a shop with a 4 post drive-on hoist.

fastwillie 696969 · 10-18-2009, 10:34 AM

Quote:

Originally Posted by 68C15

good one Shawn

I have a better idea, not exactly cheaper or faster though. get an education in auto repair. spend over $40K in tools. get a job at a shop with a 4 post drive-on hoist.

i hear that

but i love the 4 post lift,expect for when the general manager of the dealership (owners son) puts the 4 post lift where its almost impossible to bring in a one ton or bigger truck,they built a building around the lift when they extended the shop just not good planning when they redid the service bays next time im there i take pictures of the lay out

DubDubU · 10-17-2009, 04:15 PM

Use lots of really long drywall screws and make sure they point up.

fastwillie 696969 · 10-17-2009, 04:34 PM

theres a dude im colorado who can help with a ballon

big blue 72 · 10-17-2009, 04:47 PM

My Grandson and I are working on a set right now that we will ship to you as soon as we get back from WallY World.
We ran out of Legos!

**special-K** · 10-18-2009, 07:34 AM

That`s nice,but I need plans for the one you can stand under.

fastwillie 696969 · 10-18-2009, 10:37 AM

Quote:

Originally Posted by special-K

That`s nice,but I need plans for the one you can stand under.

this is when the ballon comes in like i said earlier LOL

10-17-2009, 03:52 PM	#1
Sillyoldman #16876 Join Date: Apr 2005 Location: Auburn WA Posts: 12,266	Can anyone tell me how to make these? I can't afford the plans http://cgi.ebay.com/ebaymotors/Car-R...motiveQ5fTools __________________ Posted via Stationary Device '71 Custom Deluxe C-20 402. '67 Buick Special 455. '49 Plymouth Special Deluxe. *"I love that old car smell"* *Some people are like Slinkies... not really good for anything, but they still bring a smile to your face when you push them down a flight of stairs.*

10-17-2009, 04:09 PM	#2
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	Re: Can anyone tell me how to make these? i used to do stuff like that in preschool __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

10-17-2009, 06:21 PM	#4
chevyboy55 Senior Member Join Date: Aug 2004 Location: Kelso,Wa Posts: 3,637	Re: Can anyone tell me how to make these? I wish you could see if anyone actually bought any. __________________ Great minds think alike,So do ours

10-17-2009, 06:48 PM	#5
cableguy0 Senior Member Join Date: Apr 2000 Location: Delta,Pa Posts: 14,948	Re: Can anyone tell me how to make these? If you look at the feedback he sold at least 1. __________________ Owner of North Point Car Care in Dundalk Md. We specialize in custom exhaust on both modern and classic vehicles. We are a full service auto shop from classics to modern vehicles. Feel free to contact me with questions. I will give a 10% discount to any board member.

10-17-2009, 07:01 PM	#7
big_al_71 Registered User Join Date: Jun 2008 Location: South Florida Posts: 11,375	Re: Can anyone tell me how to make these? I dont know if I would go under the car with anything made out of wood, thats just me...great concept I would make them out of steel... __________________ Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild

10-17-2009, 04:15 PM	#10
DubDubU Registered User Join Date: Mar 2007 Location: st louis,mo Posts: 313	Re: Can anyone tell me how to make these? Use lots of really long drywall screws and make sure they point up. __________________ '79' shortbed

10-17-2009, 04:34 PM	#11
fastwillie 696969 ~Rest In Peace~ Join Date: May 2005 Location: CALIFORNIA NOR CAL Posts: 9,707	Re: Can anyone tell me how to make these? theres a dude im colorado who can help with a ballon __________________ is it fast ? it has a lighting bolt donut? B___H please, I can remove 90% of your so called "beauty" with a kleenex

10-17-2009, 04:47 PM	#12
big blue 72 Senior Member Join Date: May 2002 Location: hamilton,ohio,usa Posts: 1,499	Re: Can anyone tell me how to make these? My Grandson and I are working on a set right now that we will ship to you as soon as we get back from WallY World. We ran out of Legos! __________________ Broken Back Club 72 Club GMC Club Panel truck Club 6 cylinder Club Unfinished Projects Club Outdoor Sportsmens Club

10-18-2009, 07:34 AM	#13
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Can anyone tell me how to make these? That`s nice,but I need plans for the one you can stand under. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.