3/4 and 1 ton front ends - The 1947 - Present Chevrolet & GMC Truck Message Board Network

47guy · 10-29-2009, 08:44 PM

does anyone know what the difference is in the front ends of the the dually trucks and the single wheel trucks? i have a dana 60 rear end and was thinking about using it on my 65 i can get the front end for free but its from a dually and i wasnt sure if it would work i figured this was the best place to ask thanks for the help.

ghettoluxury · 10-29-2009, 10:50 PM

You have to change out the hubs to single wheel hubs

pig rig · 10-30-2009, 12:24 AM

the dual rear wheel front rotors have the hub casted in to them all you need to do is change the rotors from the drw to the srw rotor the spindel and caliper are the same

*2tons of fun* · 10-30-2009, 02:03 AM

no they dont, but drw rotors are different than srw rotors.

d60 front drw hubs can have the outer lip machined off and be turned into srw setup. the drw rotors have a slightly smaller hole and are BOLTED to the hub.

srw rotors are pinched to the hub with the wheel stud, like a d44/10b. you can drill the holes out if need be.

drw rotors are also thicker, but they will still use the same caliper and pads.

keep the drw and use h1 wheels.

pig rig · 10-30-2009, 12:55 PM

it looks like casted as one to me. the one's that i just took off look the same along with the new ones I put back on

this is srw

47guy · 10-30-2009, 06:30 PM

thanks for the help the pics really made it clear as to what is needed to run this thanks again

*2tons of fun* · 10-30-2009, 10:15 PM

Quote:

Originally Posted by pig rig

it looks like casted as one to me. the one's that i just took off look the same along with the new ones I put back on

this is srw

you are right, once again i repeatedly read the first post wrong, i thought he was putting a d60 FRONT 4wd in.

sorry.

manimal · 10-30-2009, 07:56 PM

so thats it,just change out the rotor from dually to single..?????The spindles are the same?!?!?!...........AWESOME
I have a set of drop spindles for a 1ton and I guess the 3/4t is the same thing!
Sorry to HIJACK

pig rig · 10-30-2009, 09:48 PM

the caliper is differant between the 1T and the 3/4 and I dont know if theirs a differents between the thickness of the rotors on the 3/4T and the 1T's

10-29-2009, 08:44 PM	#1
47guy Registered User Join Date: Jul 2009 Location: moore oklahoma Posts: 36	3/4 and 1 ton front ends does anyone know what the difference is in the front ends of the the dually trucks and the single wheel trucks? i have a dana 60 rear end and was thinking about using it on my 65 i can get the front end for free but its from a dually and i wasnt sure if it would work i figured this was the best place to ask thanks for the help.

10-29-2009, 10:50 PM	#2
ghettoluxury Registered User Join Date: Apr 2009 Location: Waynesfield Ohio Posts: 1,991	Re: 3/4 and 1 ton front ends You have to change out the hubs to single wheel hubs __________________ 1949 Five Window, 1973 Step Side, 2000 Z71

10-30-2009, 12:24 AM	#3
pig rig Registered User Join Date: Feb 2009 Location: washington the state Posts: 730	Re: 3/4 and 1 ton front ends the dual rear wheel front rotors have the hub casted in to them all you need to do is change the rotors from the drw to the srw rotor the spindel and caliper are the same __________________ my sports car rolls on six wheels only because I'm to fat to get in and out of new corvette http://hubgarage.s3.amazonaws.com/ph...ped_detail.JPG

10-30-2009, 02:03 AM	#4
2tons of fun Account Suspended Join Date: Jan 2009 Location: galt ca, Posts: 749	Re: 3/4 and 1 ton front ends no they dont, but drw rotors are different than srw rotors. d60 front drw hubs can have the outer lip machined off and be turned into srw setup. the drw rotors have a slightly smaller hole and are BOLTED to the hub. srw rotors are pinched to the hub with the wheel stud, like a d44/10b. you can drill the holes out if need be. drw rotors are also thicker, but they will still use the same caliper and pads. keep the drw and use h1 wheels.

10-30-2009, 12:55 PM	#5
pig rig Registered User Join Date: Feb 2009 Location: washington the state Posts: 730	Re: 3/4 and 1 ton front ends it looks like casted as one to me. the one's that i just took off look the same along with the new ones I put back on this is srw __________________ my sports car rolls on six wheels only because I'm to fat to get in and out of new corvette http://hubgarage.s3.amazonaws.com/ph...ped_detail.JPG

10-30-2009, 06:30 PM	#6
47guy Registered User Join Date: Jul 2009 Location: moore oklahoma Posts: 36	Re: 3/4 and 1 ton front ends thanks for the help the pics really made it clear as to what is needed to run this thanks again

10-30-2009, 07:56 PM	#8
manimal Registered User Join Date: Oct 2006 Location: Southern Kalifornia Posts: 3,066	Re: 3/4 and 1 ton front ends so thats it,just change out the rotor from dually to single..?????The spindles are the same?!?!?!...........AWESOME I have a set of drop spindles for a 1ton and I guess the 3/4t is the same thing! Sorry to HIJACK __________________ ------------------------------------------------------ -Lance 2000 Chevy C2500, 5.7, 4L80e 1999 Suburban K2500, 7.4, 4L80e 1980 Camaro..son's car...PROJECT

10-30-2009, 09:48 PM	#9
pig rig Registered User Join Date: Feb 2009 Location: washington the state Posts: 730	Re: 3/4 and 1 ton front ends the caliper is differant between the 1T and the 3/4 and I dont know if theirs a differents between the thickness of the rotors on the 3/4T and the 1T's __________________ my sports car rolls on six wheels only because I'm to fat to get in and out of new corvette http://hubgarage.s3.amazonaws.com/ph...ped_detail.JPG



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.