one piece cab floor replacement - The 1947 - Present Chevrolet & GMC Truck Message Board Network

redbaron69 · 10-31-2009, 09:55 PM

has anybody bought one of these and put it in? how did it fit? after tearing into my cab and looking at what needs to be repaired, im thinking this may be a little easier than a patch here and a patch there.....

anybody installed one of these? let me know how it turned out for ya thanks

**LockDoc** · 10-31-2009, 10:03 PM

-
I think I have seen a couple of threads on it but they may have been in the "builds" forum.

LockDoc

sdailey · 10-31-2009, 10:08 PM

I know member msgross replaced his. Click on the link below for his build thread.

http://67-72chevytrucks.com/vboard/s...d.php?t=242910

redbaron69 · 10-31-2009, 11:11 PM

thanks for the links guys. gonna blast my cab here in the next few weeks and make a decision from there.

jlaird · 11-01-2009, 03:42 PM

I put one it. I would highly recommend it, but it doesn't fit PERFECT...then again, no replacement panel does. The only area that isn't quite right is the tunnel lip.

Here is my thread on it.

http://67-72chevytrucks.com/vboard/s...d.php?t=311224

ebfabman · 11-01-2009, 04:29 PM

And another one........

http://67-72chevytrucks.com/vboard/s...light=cod+fish

redbaron69 · 11-01-2009, 07:57 PM

man that is some super good work guys! my hats off to both of you! ebfabman, thanks for that link. i also got some rust issues under my cowl im gonna have to fix, and was wondering were to cut the "caps" off so i could get in there. i got a long road ahead thats for sure, but seeing that this stuff can be done makes me feel better..... about my rust bucket

67slammer · 11-01-2009, 08:04 PM

i installed mine in a 67 small window cab and it fit perfect, went right in with no issues. puchased it from tri pro. just have to make sure you brace the cab well before cutting the old floor out.

10-31-2009, 09:55 PM	#1
redbaron69 Registered User Join Date: Jan 2009 Location: marion nc Posts: 588	one piece cab floor replacement has anybody bought one of these and put it in? how did it fit? after tearing into my cab and looking at what needs to be repaired, im thinking this may be a little easier than a patch here and a patch there.....anybody installed one of these? let me know how it turned out for ya thanks __________________ 69 short fleet 350/350 "under construction" 70 short step 307/3 speed

10-31-2009, 10:03 PM	#2
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,468	Re: one piece cab floor replacement - I think I have seen a couple of threads on it but they may have been in the "builds" forum. LockDoc __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -

10-31-2009, 10:08 PM	#3
sdailey The Few, The Proud Join Date: Jun 2007 Location: Ball Ground, Georgia Posts: 1,830	Re: one piece cab floor replacement I know member msgross replaced his. Click on the link below for his build thread. http://67-72chevytrucks.com/vboard/s...d.php?t=242910 __________________ Shannon

10-31-2009, 11:11 PM	#4
redbaron69 Registered User Join Date: Jan 2009 Location: marion nc Posts: 588	Re: one piece cab floor replacement thanks for the links guys. gonna blast my cab here in the next few weeks and make a decision from there. __________________ 69 short fleet 350/350 "under construction" 70 short step 307/3 speed

11-01-2009, 03:42 PM	#5
jlaird Senior Member Join Date: May 2004 Location: johnstown, NY Posts: 2,393	Re: one piece cab floor replacement I put one it. I would highly recommend it, but it doesn't fit PERFECT...then again, no replacement panel does. The only area that isn't quite right is the tunnel lip. Here is my thread on it. http://67-72chevytrucks.com/vboard/s...d.php?t=311224

11-01-2009, 04:29 PM	#6
ebfabman Registered User Join Date: Nov 2001 Location: Concord, NC Posts: 2,489	Re: one piece cab floor replacement And another one........ http://67-72chevytrucks.com/vboard/s...light=cod+fish

11-01-2009, 07:57 PM	#7
redbaron69 Registered User Join Date: Jan 2009 Location: marion nc Posts: 588	Re: one piece cab floor replacement man that is some super good work guys! my hats off to both of you! ebfabman, thanks for that link. i also got some rust issues under my cowl im gonna have to fix, and was wondering were to cut the "caps" off so i could get in there. i got a long road ahead thats for sure, but seeing that this stuff can be done makes me feel better..... about my rust bucket __________________ 69 short fleet 350/350 "under construction" 70 short step 307/3 speed

11-01-2009, 08:04 PM	#8
67slammer Registered User Join Date: Jan 2008 Location: muncy pa Posts: 425	Re: one piece cab floor replacement i installed mine in a 67 small window cab and it fit perfect, went right in with no issues. puchased it from tri pro. just have to make sure you brace the cab well before cutting the old floor out. __________________ 67 short bed stepside tach tilt buddy buckets bagged sittin on 20s and 4w disc brakes (not quite finnished)



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.