new parts truck - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Kman · 01-19-2003, 10:19 PM

Bought a 72 c20 custom camper with out engine or trans for parts. I'll be parting out the rolling chassis w/ power steering and assorted parts I'm not going to use, the doors are gone as well as cab roof but it is an ac cab which is what I was looking for. Anyone interested in the chassis ?
Kman

Kman · 01-19-2003, 11:41 PM

heres a pic

chevy2racr · 01-20-2003, 12:10 AM

that cab is shot? damn, doors look mint compared to tehones on my step, wanna ship them to MELBOURNE, Iowa?

Kman · 01-20-2003, 12:20 AM

The drip rails and above windshield are rusted through the doors were repairable but they didnt come in the deal. I'm cutting the a/c dash out so there isn't going to be much left of cab . it has a good back window and I don't know what else ,I bring it home tomorow and will check out what I don't want and will post some other pics on parts board
Kman

sakohntr · 01-20-2003, 12:37 AM

What does it have for a rearend?

Kman · 01-20-2003, 12:41 AM

3/4 8 lug I don't know the ratio it was a custom camper w/396 when new

GMC71k20 · 01-20-2003, 01:13 AM

still have any of the BB stuff?

Kman · 01-20-2003, 01:24 AM

It was a sb 396 most engine stuff is long gone but there is a pile of parts in the bed I didn't go through yet. drive shafts, trim,air cleaner, etc.

**Don Brace** · 01-20-2003, 02:47 PM

Kman
I am looking for some wood grain trim. Need both the lower rear
pieces and the one on the bottom rear of the drivers fender. Are those usable?

*rayville body* · 01-20-2003, 06:10 PM

does it have disc brakes on the front? if so how much for the spindles, rotors, calipers, and centerlink?

72c10 · 01-20-2003, 06:16 PM

I am interested in both side veiw merrors if they are not broke and you arent going to use them

Kman · 01-20-2003, 08:41 PM

Don Brace -sorry the trim is chrome with black insert and I am keeping it

Rayville Body- Disk brake set up is complete make me an offer

72C10- Sorry mirrors are gone

thanks

Kman

*rayville body* · 01-20-2003, 09:19 PM

how much do you think shipping would be to louisiana? i dont really want to make an offer because i dont know what it is worth.

Hooter · 01-20-2003, 10:38 PM

Parts truck? that thing looks pretty good to me?

Kman · 01-21-2003, 01:01 AM

I would like to sell the whole rolling chassis but if there is no takers then I will start pulling disk brakes and rear end. I didn't get to pick up the truck as planed i'll try tomorrow so I can really see what I want to keep and what to sell

And yeah this parts truck culd be put back together just needs .... to much
kman

**1971Stepside** · 01-21-2003, 05:53 PM

It wouldn't happen to have the Big block engine towers still there would it? I am looking for a set of those cheap....

01-19-2003, 10:19 PM	#1
Kman Registered User Join Date: Sep 2002 Location: Melbourne,Florida Posts: 174	new parts truck Bought a 72 c20 custom camper with out engine or trans for parts. I'll be parting out the rolling chassis w/ power steering and assorted parts I'm not going to use, the doors are gone as well as cab roof but it is an ac cab which is what I was looking for. Anyone interested in the chassis ? Kman __________________ New 89 chevy 1500 driver 72K20 rust bucket project stripped down to the frame engine rebuild started 71 Blazer - another procect

01-19-2003, 11:41 PM	#2
Kman Registered User Join Date: Sep 2002 Location: Melbourne,Florida Posts: 174	parts heres a pic Attached Images __________________ New 89 chevy 1500 driver 72K20 rust bucket project stripped down to the frame engine rebuild started 71 Blazer - another procect

01-20-2003, 12:10 AM	#3
chevy2racr So Many Ideas, So Little Money Join Date: Sep 2001 Location: Marshalltown, IA Posts: 1,610	that cab is shot? damn, doors look mint compared to tehones on my step, wanna ship them to MELBOURNE, Iowa? __________________ 72 Blazer 3/4 ton running gear 4.10s NP205/TH350 350 4in lift half doors 71 C10 with 454 99 S-10 5.1L SBC 700R4 09 Malibu Marshalltown, Iowa

01-20-2003, 12:20 AM	#4
Kman Registered User Join Date: Sep 2002 Location: Melbourne,Florida Posts: 174	The drip rails and above windshield are rusted through the doors were repairable but they didnt come in the deal. I'm cutting the a/c dash out so there isn't going to be much left of cab . it has a good back window and I don't know what else ,I bring it home tomorow and will check out what I don't want and will post some other pics on parts board Kman __________________ New 89 chevy 1500 driver 72K20 rust bucket project stripped down to the frame engine rebuild started 71 Blazer - another procect

01-20-2003, 12:37 AM	#5
sakohntr Registered User Join Date: Mar 2002 Location: Floodwood Minnesota Posts: 1,057	? What does it have for a rearend? __________________ 1967 K30 Napco 292/SM420 original paint 30k miles 1968 K60 Napco 396/5spd. dbl frame 52" michelins 1969 K10 SWB GMC 454/4spd 6" 35's posi,hooks 1972 C30 longhorn,BB/AT,A/C,Tilt,Toolbox,lokr 1987 K20 Chevrolet Suburban. 6" lift. 5.7L/TH400 1979 K60 GMC Coleman 4x4, 427/Allison.

01-20-2003, 12:41 AM	#6
Kman Registered User Join Date: Sep 2002 Location: Melbourne,Florida Posts: 174	3/4 8 lug I don't know the ratio it was a custom camper w/396 when new __________________ New 89 chevy 1500 driver 72K20 rust bucket project stripped down to the frame engine rebuild started 71 Blazer - another procect

01-20-2003, 01:13 AM	#7
GMC71k20 Registered User Join Date: Aug 2002 Location: mass Posts: 1,277	still have any of the BB stuff?

01-20-2003, 01:24 AM	#8
Kman Registered User Join Date: Sep 2002 Location: Melbourne,Florida Posts: 174	It was a sb 396 most engine stuff is long gone but there is a pile of parts in the bed I didn't go through yet. drive shafts, trim,air cleaner, etc. __________________ New 89 chevy 1500 driver 72K20 rust bucket project stripped down to the frame engine rebuild started 71 Blazer - another procect

01-20-2003, 02:47 PM	#9
Don Brace Active Member Join Date: Nov 2002 Location: Clarks Grove MN Posts: 487	Kman I am looking for some wood grain trim. Need both the lower rear pieces and the one on the bottom rear of the drivers fender. Are those usable? __________________ Don Brace 55 Nomad 56 Nomad 58 Impalla Coupe 58 Bel-Aire 4D HT 61 Impala CVRT 409 4 SP 2- 71 Longhorns Always looking for old toy trains, Juke boxes Pin ball and game machines.

01-20-2003, 06:10 PM	#10
rayville body Account Suspended Join Date: Nov 2002 Location: rayville,LA Posts: 226	does it have disc brakes on the front? if so how much for the spindles, rotors, calipers, and centerlink?

01-20-2003, 06:16 PM	#11
72c10 Registered User Join Date: Dec 2002 Location: burlington KY Posts: 175	I am interested in both side veiw merrors if they are not broke and you arent going to use them

01-20-2003, 08:41 PM	#12
Kman Registered User Join Date: Sep 2002 Location: Melbourne,Florida Posts: 174	Don Brace -sorry the trim is chrome with black insert and I am keeping it Rayville Body- Disk brake set up is complete make me an offer 72C10- Sorry mirrors are gone thanks Kman __________________ New 89 chevy 1500 driver 72K20 rust bucket project stripped down to the frame engine rebuild started 71 Blazer - another procect Last edited by Kman; 01-20-2003 at 08:58 PM.

01-20-2003, 09:19 PM	#13
rayville body Account Suspended Join Date: Nov 2002 Location: rayville,LA Posts: 226	how much do you think shipping would be to louisiana? i dont really want to make an offer because i dont know what it is worth.

01-20-2003, 10:38 PM	#14
Hooter My other Love Join Date: Aug 2001 Location: Castlegar B.C. Canada Posts: 4,085	Parts truck? that thing looks pretty good to me? __________________ Castlegar B.C.The great white North (Canada Eh!) Hooter_5@hotmail.com First generation Monte Carlo club pictures of my life

01-21-2003, 01:01 AM	#15
Kman Registered User Join Date: Sep 2002 Location: Melbourne,Florida Posts: 174	I would like to sell the whole rolling chassis but if there is no takers then I will start pulling disk brakes and rear end. I didn't get to pick up the truck as planed i'll try tomorrow so I can really see what I want to keep and what to sell And yeah this parts truck culd be put back together just needs .... to much kman __________________ New 89 chevy 1500 driver 72K20 rust bucket project stripped down to the frame engine rebuild started 71 Blazer - another procect Last edited by Kman; 01-21-2003 at 01:04 AM.



Register or Log In To remove these advertisements.

01-21-2003, 05:53 PM	#16
1971Stepside Almost Satisfied Join Date: Mar 2002 Location: Springfield, MO Posts: 2,932	It wouldn't happen to have the Big block engine towers still there would it? I am looking for a set of those cheap.... __________________ 1971 C10 Stepside. LSx 6.0 with BTR Stage IV, Speed Engineering Headers, 4L80e transmission w/3200 Circle-D Stall. 3.73. Posi. Purchased this truck when I was 17. I started the rebuild (or take apart) in 1993. I have drug it around all over the country in pieces. Finally back on the road in 2021. "I can't complain, but sometimes I still do. Life's been good to me so far."

Register or Log In To remove these advertisements.