Pleasee help!!!!!! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Mudder · 11-08-2009, 12:25 AM

MY granddaughter decided to insert a credit card into the cd player in her mom's Intrepid. The unit has a cd and cassette combo if that matters. Anyone have any ideas on how to get it out without taking everything apart?

monolith · 11-08-2009, 12:53 AM

Maybe try a paperclip or similar gauge solid wire to try to "hook" the card out?

Andy4639 · 11-08-2009, 03:04 AM

Tweasers for a lack of spelling. Try another card to get under it lift it up grab with the tweasers and pull it out.
Aren't kids the greatest!!

Mordachai · 11-08-2009, 09:40 AM

get a thin metal straightedge or something like it(maybe a butter knife) and stick double stick tape on the end.

slide it in there, press against the CC and pull, - voila out comes the CC!!

(ask me how I know this) DOH!

msgross · 11-08-2009, 09:42 AM

don't turn it on though, if the laser eye bumps into it then you could have problems with it reading discs later.

Mudder · 11-08-2009, 11:28 AM

After a lot of thought last night. (I know sounds dangerous), I have decided to try the straight edge and tape thing. I have a metal ruler that is really thin. I'm gonna try to get some tape on both sides of it and see if I can fish it out. The opening is really narrow. Thanks for all the ideas. I will let ya know how it works.

Mordachai · 11-08-2009, 12:23 PM

^ yeah, you just gotta be gentle... I suppose you could use a piece of plastic too

Mudder · 11-12-2009, 10:44 AM

Update. Had to take it apart. Friend helped me take the molding from the dash. I did the rest. Easy job with 8 screws, pulling the radio out part way and taking the face plate off. Putting the trim molding back on was the trick. I seen them at work hit them with their fist and that is what it took just in the right place and right angle. Cross your fingers and hope it doesn't break.

Thanks for all the ideas.

TheSunDanceKid · 01-09-2010, 05:27 AM

next time invest in a set of "pick tools" they are kind of like what a dentist uses but they sell a set of 6 at autozone for like 8bucks and you will find them useful for your situation and taking broken off keys in locks out dash board plastic pannels all kinds off stuff i use them alot in the audio industrie they are cheap and have helped out in alot of jams

11-08-2009, 12:25 AM	#1
Mudder Registered User Join Date: Feb 2001 Location: East Central, MO Posts: 11,336	Pleasee help!!!!!! MY granddaughter decided to insert a credit card into the cd player in her mom's Intrepid. The unit has a cd and cassette combo if that matters. Anyone have any ideas on how to get it out without taking everything apart? Last edited by Mudder; 11-08-2009 at 12:25 AM.

11-08-2009, 12:53 AM	#2
monolith Zero Albedo Join Date: Mar 2009 Location: San Gabriel, California Posts: 478	Re: Pleasee help!!!!!! Maybe try a paperclip or similar gauge solid wire to try to "hook" the card out? __________________ Baz "Deserve's got nothin' to do with it." 66 GMC 1500 wideside longbed 250 4spd "Project Rekker"http://67-72chevytrucks.com/vboard/s...d.php?t=467467 65 GMC 1Ton Panelhttp://67-72chevytrucks.com/vboard/s...32#post4794432 65 Chevy Panel (former U.S.Navy truck) 64 Chevy Suburban Carryall 4x4http://67-72chevytrucks.com/vboard/s...d.php?t=358348 64 GMC 1000 wideside longbed 305 4spdhttp://67-72chevytrucks.com/vboard/s....php?p=3600890(Rip- parts truck now) 68 Dodge Charger

11-08-2009, 03:04 AM	#3
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: Pleasee help!!!!!! Tweasers for a lack of spelling. Try another card to get under it lift it up grab with the tweasers and pull it out. Aren't kids the greatest!! __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

11-08-2009, 09:40 AM	#4
Mordachai Fat Fendered Fleetside Join Date: Nov 2004 Location: WPB, S. FL, USA, Earth Posts: 718	Re: Pleasee help!!!!!! get a thin metal straightedge or something like it(maybe a butter knife) and stick double stick tape on the end. slide it in there, press against the CC and pull, - voila out comes the CC!! (ask me how I know this) DOH! __________________ 71 GMC lwb 56 Big window swb 93 GMC Sonoma (dd) radiused fiberglass fender project for 67-72 Last edited by Mordachai; 11-08-2009 at 09:41 AM.

11-08-2009, 09:42 AM	#5
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: Pleasee help!!!!!! don't turn it on though, if the laser eye bumps into it then you could have problems with it reading discs later. __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

11-08-2009, 11:28 AM	#6
Mudder Registered User Join Date: Feb 2001 Location: East Central, MO Posts: 11,336	Re: Pleasee help!!!!!! After a lot of thought last night. (I know sounds dangerous), I have decided to try the straight edge and tape thing. I have a metal ruler that is really thin. I'm gonna try to get some tape on both sides of it and see if I can fish it out. The opening is really narrow. Thanks for all the ideas. I will let ya know how it works.

11-08-2009, 12:23 PM	#7
Mordachai Fat Fendered Fleetside Join Date: Nov 2004 Location: WPB, S. FL, USA, Earth Posts: 718	Re: Pleasee help!!!!!! ^ yeah, you just gotta be gentle... I suppose you could use a piece of plastic too

11-12-2009, 10:44 AM	#8
Mudder Registered User Join Date: Feb 2001 Location: East Central, MO Posts: 11,336	Re: Pleasee help!!!!!! Update. Had to take it apart. Friend helped me take the molding from the dash. I did the rest. Easy job with 8 screws, pulling the radio out part way and taking the face plate off. Putting the trim molding back on was the trick. I seen them at work hit them with their fist and that is what it took just in the right place and right angle. Cross your fingers and hope it doesn't break. Thanks for all the ideas.

01-09-2010, 05:27 AM	#9
TheSunDanceKid Registered User Join Date: Aug 2009 Location: chandler, arizona Posts: 125	Re: Pleasee help!!!!!! next time invest in a set of "pick tools" they are kind of like what a dentist uses but they sell a set of 6 at autozone for like 8bucks and you will find them useful for your situation and taking broken off keys in locks out dash board plastic pannels all kinds off stuff i use them alot in the audio industrie they are cheap and have helped out in alot of jams



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.