NC FS Rear cab trim “paint divider” - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Dasani · 11-22-2009, 07:53 PM

I have three good sets of trim for the rear of the cab "paint dividers". Good driver condition. I had about ten sets and after sorting, this is what I have left, all three are three piece sets. $15.00 each set plus shipping.

I parted out ten 67 – 72 trucks, I have a garage and a storage building full of parts I need to sell, send your request.

Please reply in this thread to reduce confusion and maintain the integrity of this forum.

Dasani

tr69c10 · 11-22-2009, 08:46 PM

Do you have any c-10 emblems that go on the fender and 350 badges thanks

Dasani · 11-22-2009, 08:54 PM

Quote:

Originally Posted by tr69c10

Do you have any c-10 emblems that go on the fender and 350 badges thanks

I'll look tomorrow and take pics of what I have

Dasani · 11-23-2009, 09:29 AM

bump

**yote1234** · 11-23-2009, 02:46 PM

need 72 air cab, rust free..?????

Dasani · 11-23-2009, 11:16 PM

Quote:

Originally Posted by yote1234

need 72 air cab, rust free..?????

You are in the place for those!

mup123 · 11-24-2009, 05:12 PM

Do you have a 67/68 hood in good condition?

Dasani · 11-24-2009, 08:47 PM

Quote:

Originally Posted by mup123

Do you have a 67/68 hood in good condition?

I have two or three nice 67/68 hoods I'm headed out of town in the morning I'll be home Saturday. I'll get you some pictures, I think the problem you will have is shipping!

mup123 · 11-24-2009, 09:16 PM

Quote:

Originally Posted by Dasani

I have two or three nice 67/68 hoods I'm headed out of town in the morning I'll be home Saturday. I'll get you some pictures, I think the problem you will have is shipping!

I will be visiting a friend in NC in January and will pick it up.I need several other parts as well and will give you a list on saturday.

Dasani · 11-25-2009, 11:40 PM

Quote:

Originally Posted by mup123

I will be visiting a friend in NC in January and will pick it up.I need several other parts as well and will give you a list on saturday.

Cool, give me a list and I’ll work on it for you, if I don't what you need I'll see if I can locate it.

mup123 · 11-27-2009, 04:54 PM

Quote:

Originally Posted by Dasani

Cool, give me a list and I’ll work on it for you, if I don't what you need I'll see if I can locate it.

Hi,
Here is the list:
Radiator support for 68 C-10
Driveshaft including transmission yoke for C-10 shortbox with TH350 auto tranney
Both bare door shells
Both inner plastic 68 door panels
Both door mirror arms w/3 screw mounting plates, chrome or painted, ref. LMC # 38-5852
Front stepside bed panel
Power steering box
Master cylinder w/brake booster & prop valve
Both front stock spindles with 5 lug disc brake setup
Both 5 lug rear axle shafts or 5 lug 12 bolt differential housing
Driver side rear fender w/ spare tire cutout and spare tire bracket.
Front sway bar with front frame brackets

**driller35** · 12-01-2009, 10:21 PM

do you have 72 am-fm radio?

Dasani · 12-01-2009, 11:07 PM

Quote:

Originally Posted by driller35

do you have 72 am-fm radio?

Let me check, I have a '72 Super It might!

Dasani · 12-02-2009, 11:52 AM

Quote:

Originally Posted by driller35

do you have 72 am-fm radio?

I thought you were in luck but it is a Motorola am fm 8 track!!

**driller35** · 12-02-2009, 01:16 PM

Thanks Dasani for looking, will keep searching for one
Cheers

mup123 · 12-02-2009, 10:42 PM

Hi,
I received 4 emails.

Dasani · 12-02-2009, 10:55 PM

Quote:

Originally Posted by mup123

Hi,
I received 4 emails.

Okay it worked!! Cool

Tom

mup123 · 12-02-2009, 11:15 PM

Quote:

Originally Posted by Dasani

Okay it worked!! Cool

Tom

Hi,
You didn't mention the front end. There are a couple of boardmembers who sell these 5 lug disc brake front ends complete including the crossmember and front section of chassis for around $75 each. I could have bought one in Kansas a couple of weeks ago.
I would like to see a couple more pics of the hood.
I will email you with my other email address as I think there is a problem with the way it transmits in this thread.
John

Dasani · 12-03-2009, 07:58 AM

John,

I’d rather cut the frame behind the crossmember and have you take it that way that is less work for me, fewer busted knuckles. I’m going to cut that out this week end. I sell a lot of parts locally I ask $100-$150, if this crossmember is still here hasn’t sold when you get here in January you can have it for $75.00!

Tom

Quote:

Originally Posted by mup123

Hi,
You didn't mention the front end. There are a couple of boardmembers who sell these 5 lug disc brake front ends complete including the crossmember and front section of chassis for around $75 each. I could have bought one in Kansas a couple of weeks ago.
I would like to see a couple more pics of the hood.
I will email you with my other email address as I think there is a problem with the way it transmits in this thread.
John

mup123 · 12-03-2009, 09:36 AM

Quote:

Originally Posted by Dasani

John,

I’d rather cut the frame behind the crossmember and have you take it that way that is less work for me, fewer busted knuckles. I’m going to cut that out this week end. I sell a lot of parts locally I ask $100-$150, if this crossmember is still here hasn’t sold when you get here in January you can have it for $75.00!

Tom

Tom,
Thanks,
John

11-22-2009, 07:53 PM	#1
Dasani Registered User Join Date: Jan 2009 Location: Havelock, NC. Posts: 497	FS Rear cab trim “paint divider” I have three good sets of trim for the rear of the cab "paint dividers". Good driver condition. I had about ten sets and after sorting, this is what I have left, all three are three piece sets. $15.00 each set plus shipping. I parted out ten 67 – 72 trucks, I have a garage and a storage building full of parts I need to sell, send your request. Please reply in this thread to reduce confusion and maintain the integrity of this forum. Dasani Attached Images

11-22-2009, 08:46 PM	#2
tr69c10 Registered User Join Date: Feb 2008 Location: bellflower ca Posts: 370	Re: FS Rear cab trim “paint divider” Do you have any c-10 emblems that go on the fender and 350 badges thanks

11-23-2009, 09:29 AM	#4
Dasani Registered User Join Date: Jan 2009 Location: Havelock, NC. Posts: 497	Re: FS Rear cab trim “paint divider” bump

11-23-2009, 02:46 PM	#5
yote1234 Senior Member Join Date: Feb 2003 Location: Gold Canyon Arizona Posts: 4,330	Re: FS Rear cab trim “paint divider” need 72 air cab, rust free..????? __________________ 1971 K5 CST Blazer 1965 Chevelle Malibu 283 (sadly sold) 1968 Camaro 327 1968 Honda mini-trail z50a #377 1966 uh 1-D Huey

11-24-2009, 05:12 PM	#7
mup123 Registered User Join Date: May 2009 Location: Paradise Newfoundland Canada Posts: 183	Re: FS Rear cab trim “paint divider” Do you have a 67/68 hood in good condition?

12-01-2009, 10:21 PM	#12
driller35 Senior Member Join Date: Aug 2009 Location: Calgary,AB Posts: 323	Re: FS Rear cab trim “paint divider” do you have 72 am-fm radio? __________________ 72 Chev Cheyenne Super SB 4x4 350,4spd,buckets, tilt,tach,am-fm,extreme tow hooks,Canadian Model Production 1 of 52 SOLD 70 Chev CST, 350 auto, PS, PB, AC, tach

12-02-2009, 01:16 PM	#15
driller35 Senior Member Join Date: Aug 2009 Location: Calgary,AB Posts: 323	Re: FS Rear cab trim “paint divider” Thanks Dasani for looking, will keep searching for one Cheers __________________ 72 Chev Cheyenne Super SB 4x4 350,4spd,buckets, tilt,tach,am-fm,extreme tow hooks,Canadian Model Production 1 of 52 SOLD 70 Chev CST, 350 auto, PS, PB, AC, tach

12-02-2009, 10:42 PM	#16
mup123 Registered User Join Date: May 2009 Location: Paradise Newfoundland Canada Posts: 183	Re: FS Rear cab trim “paint divider” Hi, I received 4 emails.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.